From 272e0a702a2bcfb383c59051f37c87dcdbe844f5 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 14 Jan 2020 17:15:57 +0100 Subject: ipq40xx: add v5.4 support Signed-off-by: John Crispin --- .../arch/arm/boot/dts/qcom-ipq4029-mr33.dts | 400 +++++++++++++++++++++ 1 file changed, 400 insertions(+) create mode 100644 target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-mr33.dts (limited to 'target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-mr33.dts') diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-mr33.dts new file mode 100644 index 0000000000..5003572420 --- /dev/null +++ b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-mr33.dts @@ -0,0 +1,400 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Meraki MR33 (Stinkbug) + * + * Copyright (C) 2017 Chris Blake + * Copyright (C) 2017 Christian Lamparter + * + * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "Meraki MR33 Access Point"; + compatible = "meraki,mr33"; + + aliases { + led-boot = &status_green; + led-failsafe = &status_red; + led-running = &status_green; + led-upgrade = &power_orange; + }; + + /* Do we really need this defined? */ + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + /* It is a 56-bit counter that supplies the count to the ARM arch + timers and without upstream driver */ + counter@4a1000 { + compatible = "qcom,qca-gcnt"; + reg = <0x4a1000 0x4>; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; + + bluetooth { + compatible = "ti,cc2650"; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + }; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ + switch_lan_bmp = <0x0>; /* lan port bitmap */ + switch_wan_bmp = <0x10>; /* wan port bitmap */ + }; + + edma@c080000 { + qcom,single-phy; + qcom,num_gmac = <1>; + phy-mode = "rgmii-rxid"; + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_orange: power { + label = "mr33:orange:power"; + gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + qcom,phy_mdio_addr = <1>; + qcom,poll_required = <1>; + vlan_tag = <0 0x20>; +}; + +&blsp1_i2c3 { + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "okay"; + at24@50 { + compatible = "atmel,24c64"; + pagesize = <32>; + reg = <0x50>; + read-only; /* This holds our MAC & Meraki board-data */ + }; +}; + +&blsp1_i2c4 { + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; + + led-controller@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + clock-mode = /bits/8 <2>; + enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>; + + /* RGB led */ + status_red: chan0 { + chan-name = "mr33:red:status"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + status_green: chan1 { + chan-name = "mr33:green:status"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan2 { + chan-name = "mr33:blue:status"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan3 { + chan-name = "mr33:white:status"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "sbl1"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@100000 { + label = "mibib"; + reg = <0x00100000 0x00100000>; + read-only; + }; + partition@200000 { + label = "bootconfig"; + reg = <0x00200000 0x00100000>; + read-only; + }; + partition@300000 { + label = "qsee"; + reg = <0x00300000 0x00100000>; + read-only; + }; + partition@400000 { + label = "qsee_alt"; + reg = <0x00400000 0x00100000>; + read-only; + }; + partition@500000 { + label = "cdt"; + reg = <0x00500000 0x00080000>; + read-only; + }; + partition@580000 { + label = "cdt_alt"; + reg = <0x00580000 0x00080000>; + read-only; + }; + partition@600000 { + label = "ddrparams"; + reg = <0x00600000 0x00080000>; + read-only; + }; + partition@700000 { + label = "u-boot"; + reg = <0x00700000 0x00200000>; + read-only; + }; + partition@900000 { + label = "u-boot-backup"; + reg = <0x00900000 0x00200000>; + read-only; + }; + partition@b00000 { + label = "ART"; + reg = <0x00b00000 0x00080000>; + read-only; + }; + partition@c00000 { + label = "ubi"; + reg = <0x00c00000 0x07000000>; + /* + * Do not try to allocate the remaining + * 4 MiB to this ubi partition. It will + * confuse the u-boot and it might not + * find the kernel partition anymore. + */ + }; + }; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi2: wifi@1,0 { + compatible = "qcom,ath10k"; + status = "okay"; + reg = <0x00010000 0 0 0 0>; + }; + }; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + /* + * GPIO43 should be 0/1 whenever the unit is + * powered through PoE or AC-Adapter. + * That said, playing with this seems to + * reset the AP. + */ + + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_0_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + serial_1_pins: serial1_pinmux { + mux { + /* We use the i2c-0 pins for serial_1 */ + pins = "gpio8", "gpio9"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + i2c_0_pins: i2c_0_pinmux { + pinmux { + function = "blsp_i2c0"; + pins = "gpio20", "gpio21"; + }; + pinconf { + pins = "gpio20", "gpio21"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c_1_pins: i2c_1_pinmux { + pinmux { + function = "blsp_i2c1"; + pins = "gpio34", "gpio35"; + }; + pinconf { + pins = "gpio34", "gpio35"; + drive-strength = <16>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + /* + * There are 18 pins. 15 pins are common between LCD and NAND. + * The QPIC controller arbitrates between LCD and NAND. Of the + * remaining 4, 2 are for NAND and 2 are for LCD exclusively. + * + * The meraki source hints that the bluetooth module claims + * pin 52 as well. But sadly, there's no data whenever this + * is a NAND or LCD exclusive pin or not. + */ + + pullups { + pins = "gpio52", "gpio53", "gpio58", + "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "Meraki-MR33"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "Meraki-MR33"; +}; -- cgit v1.2.3