From 146eb4925c7f32650f38cb52139696a827051700 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 25 Nov 2019 15:25:00 +0100 Subject: ipq40xx: add support for Crisis Innovation Lab MeshPoint.One MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MeshPoint.One is Wi-Fi hotspot and smart IoT gateway (based upon Jalapeno module from 8Devices). MeshPoint.One (https://meshpointone.com) is a unique Wi-Fi hotspot and smart city gateway that can be installed and powered from street lighting (even solar power in the future). MeshPoint provides up to 27 hours of interrupted Wi-Fi and IoT services from internal battery even when external power is not available. MeshPoint.One can be used for disaster relief efforts in order to provide instant Wi-Fi coverage that can be easily expanded by just adding more devices that create wide area mesh network. MeshPoint.One devices have standard Luci UI for management. Features: - 1x 1Gpbs WAN - 1x 1Gbps LAN - POE input (eth0) - POE output (eth1) - Sensor for temperature, humidity and pressure (Bosch BME280) - current, voltage and power measurement via TI INA230 - Hardware real time clock - optional power via Li-Ion battery - micro USB port with USB to serial chip for easy OpenWrt terminal access - I2C header for connecting additional sensors Installation: ------------- Simply flash the sysupgrade image from stock firmware. Or use the built in Web recovery into bootloader: Hold Reset button for 5 to 20 seconds or use UART and httpd command. Web UI will appear on 192.168.2.100 by default. For web recovery use the factory.ubi image. Signed-off-by: Damir Samardzic Signed-off-by: Damir Franusic Signed-off-by: Valent Turkovic Signed-off-by: Robert Marko [commit description long line wrap, usb->USB] Signed-off-by: Petr Štetiar --- target/linux/ipq40xx/base-files/etc/board.d/02_network | 5 +++++ target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches | 3 +++ .../ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 2 ++ 3 files changed, 10 insertions(+) (limited to 'target/linux/ipq40xx/base-files/etc') diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index dafd83234e..122c1a103d 100755 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -18,6 +18,7 @@ ipq40xx_setup_interfaces() ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; asus,map-ac2200|\ + cilab,meshpoint-one|\ openmesh,a42|\ openmesh,a62) ucidef_set_interfaces_lan_wan "eth1" "eth0" @@ -84,6 +85,9 @@ ipq40xx_setup_macs() wan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006) lan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006) ;; + cilab,meshpoint-one) + label_mac=$(mtd_get_mac_binary "ART" 0x1006) + ;; engenius,ens620ext) wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) lan_mac=$(macaddr_add "$wan_mac" 1) @@ -96,6 +100,7 @@ ipq40xx_setup_macs() [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac } board_config_update diff --git a/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches index 4e306a94a5..e46a297ea7 100755 --- a/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches @@ -7,6 +7,9 @@ board_config_update board=$(board_name) case "$board" in +cilab,meshpoint-one) + ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "413" "1" + ;; compex,wpj428) ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0" ;; diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index d4e4cc49ec..3d46519415 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -45,6 +45,7 @@ case "$FIRMWARE" in case "$board" in 8dev,jalapeno |\ alfa-network,ap120c-ac |\ + cilab,meshpoint-one |\ glinet,gl-b1300 |\ linksys,ea6350v3 |\ qcom,ap-dk01.1-c1) @@ -109,6 +110,7 @@ case "$FIRMWARE" in case "$board" in 8dev,jalapeno |\ alfa-network,ap120c-ac |\ + cilab,meshpoint-one |\ glinet,gl-b1300 |\ linksys,ea6350v3 |\ qcom,ap-dk01.1-c1) -- cgit v1.2.3