From cbc8bcfbaa71fe0928bf07d29ec0fe6217fd51ad Mon Sep 17 00:00:00 2001
From: Piotr Dymacz <pepe2k@gmail.com>
Date: Sat, 9 Jan 2021 16:47:41 +0100
Subject: imx6: image: use vendor_model scheme

This switches device names to the common 'vendor_model' approach as in
most of other targets in OpenWrt.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
---
 target/linux/imx6/image/bootscript-solidrun_cubox | 31 +++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 target/linux/imx6/image/bootscript-solidrun_cubox

(limited to 'target/linux/imx6/image/bootscript-solidrun_cubox')

diff --git a/target/linux/imx6/image/bootscript-solidrun_cubox b/target/linux/imx6/image/bootscript-solidrun_cubox
new file mode 100644
index 00000000000..2ed48ab9415
--- /dev/null
+++ b/target/linux/imx6/image/bootscript-solidrun_cubox
@@ -0,0 +1,31 @@
+echo "CuBox OpenWrt Boot script"
+
+# Set console variable for both UART and HDMI
+setenv console console=ttymxc0,115200 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32
+
+# Find correct dtb
+if test ${board_rev} = MX6DL; then
+	setenv fdt_soc_type imx6dl;
+elif test ${board_rev} = MX6Q; then
+	setenv fdt_soc_type imx6q;
+fi
+if test ${board_name} = CUBOXI; then
+	setenv fdt_name ${fdt_soc_type}-cubox-i.dtb;
+elif test ${board_name} = HUMMINGBOARD; then
+	setenv fdt_name ${fdt_soc_type}-hummingboard.dtb;
+fi
+
+# Set correct devtype and partition
+if test ${devtype} != mmc; then setenv devtype mmc; fi
+if mmc dev 0; then
+	setenv mmcdev 0
+elif mmc dev 1; then
+	setenv mmcdev 1
+fi
+
+# Boot from the SD card is supported at the moment
+setenv bootargs "${console} root=/dev/mmcblk1p2 rw rootwait"
+mmc dev ${mmcdev}
+load ${devtype} ${mmcdev}:${devplist} ${kernel_addr_r} /uImage
+load ${devtype} ${mmcdev}:${devplist} ${fdt_addr_r} /${fdt_name}
+bootz ${kernel_addr_r} - ${fdt_addr_r}
-- 
cgit v1.2.3