From ca5c695a4522091234026e22e8336f05d65602ba Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Petr=20=C5=A0tetiar?= Date: Mon, 22 Aug 2022 14:02:36 +0200 Subject: kernel: bump 5.15 to 5.15.62 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Deleted following upstreamed patches: bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch Manually rebased following patches: bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch Runtime tested on turris-omnia and glinet-b1300. Tested-by: John Audia [bcm2711/RPi4B, mt7622/RT3200] Signed-off-by: Petr Štetiar --- target/linux/generic/pending-5.15/920-mangle_bootargs.patch | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'target/linux/generic/pending-5.15/920-mangle_bootargs.patch') diff --git a/target/linux/generic/pending-5.15/920-mangle_bootargs.patch b/target/linux/generic/pending-5.15/920-mangle_bootargs.patch index dbcd6a5b32..2a02efe0aa 100644 --- a/target/linux/generic/pending-5.15/920-mangle_bootargs.patch +++ b/target/linux/generic/pending-5.15/920-mangle_bootargs.patch @@ -31,7 +31,7 @@ Signed-off-by: Imre Kaloz help --- a/init/main.c +++ b/init/main.c -@@ -615,6 +615,29 @@ static inline void setup_nr_cpu_ids(void +@@ -616,6 +616,29 @@ static inline void setup_nr_cpu_ids(void static inline void smp_prepare_cpus(unsigned int maxcpus) { } #endif @@ -61,7 +61,7 @@ Signed-off-by: Imre Kaloz /* * We need to store the untouched command line for future reference. * We also need to store the touched command line since the parameter -@@ -955,6 +978,7 @@ asmlinkage __visible void __init __no_sa +@@ -956,6 +979,7 @@ asmlinkage __visible void __init __no_sa pr_notice("%s", linux_banner); early_security_init(); setup_arch(&command_line); -- cgit v1.2.3