From 6bc9e00e9496667e0007a0a3e1262fbf87e69b5a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 1 Jun 2015 06:11:26 +0000 Subject: kernel: backport ssb fix for WRT350N v1 (BCM4705) reboots MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki SVN-Revision: 45865 --- target/linux/generic/patches-3.18/020-ssb_update.patch | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'target/linux/generic/patches-3.18') diff --git a/target/linux/generic/patches-3.18/020-ssb_update.patch b/target/linux/generic/patches-3.18/020-ssb_update.patch index 7afba07763..f94d160fc6 100644 --- a/target/linux/generic/patches-3.18/020-ssb_update.patch +++ b/target/linux/generic/patches-3.18/020-ssb_update.patch @@ -78,18 +78,19 @@ } --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c -@@ -357,6 +357,15 @@ static void ssb_pcicore_init_hostmode(st +@@ -357,6 +357,16 @@ static void ssb_pcicore_init_hostmode(st pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA); + /* + * Accessing PCI config without a proper delay after devices reset (not -+ * GPIO reset) was causing reboots on WRT300N v1.0. ++ * GPIO reset) was causing reboots on WRT300N v1.0 (BCM4704). + * Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it + * completely. Flushing all writes was also tested but with no luck. ++ * The same problem was reported for WRT350N v1 (BCM4705), so we just ++ * sleep here unconditionally. + */ -+ if (pc->dev->bus->chip_id == 0x4704) -+ usleep_range(1000, 2000); ++ usleep_range(1000, 2000); + /* Enable PCI bridge BAR0 prefetch and burst */ val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -- cgit v1.2.3