From b3f95490b9bec020314eb32016988ee262d52884 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 29 Oct 2017 19:32:10 +0100 Subject: kernel: generic: Add kernel 4.14 support This adds initial support for kernel 4.14 based on the patches for kernel 4.9. In the configuration I deactivated some of the new possible security features like: CONFIG_REFCOUNT_FULL CONFIG_SLAB_FREELIST_HARDENED CONFIG_SOFTLOCKUP_DETECTOR CONFIG_WARN_ALL_UNSEEDED_RANDOM And these overlay FS options are also deactivated: CONFIG_OVERLAY_FS_INDEX CONFIG_OVERLAY_FS_REDIRECT_DIR I activated this: CONFIG_FORTIFY_SOURCE CONFIG_POSIX_TIMERS CONFIG_SLAB_MERGE_DEFAULT CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED I am not sure if I did the porting correct for the following patches: target/linux/generic/backport-4.14/020-backport_netfilter_rtcache.patch target/linux/generic/hack-4.14/220-gc_sections.patch target/linux/generic/hack-4.14/321-powerpc_crtsavres_prereq.patch target/linux/generic/pending-4.14/305-mips_module_reloc.patch target/linux/generic/pending-4.14/611-netfilter_match_bypass_default_table.patch target/linux/generic/pending-4.14/680-NET-skip-GRO-for-foreign-MAC-addresses.patch Signed-off-by: Hauke Mehrtens --- .../generic/hack-4.14/835-misc-owl_loader.patch | 52 ++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 target/linux/generic/hack-4.14/835-misc-owl_loader.patch (limited to 'target/linux/generic/hack-4.14/835-misc-owl_loader.patch') diff --git a/target/linux/generic/hack-4.14/835-misc-owl_loader.patch b/target/linux/generic/hack-4.14/835-misc-owl_loader.patch new file mode 100644 index 0000000000..bf7f7d5cba --- /dev/null +++ b/target/linux/generic/hack-4.14/835-misc-owl_loader.patch @@ -0,0 +1,52 @@ +From dd36f935973d91644449bd9749f6062a2bed821b Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Fri, 7 Jul 2017 17:26:46 +0200 +Subject: misc: owl-loader for delayed Atheros ath9k fixup + +Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway) +need to be able to initialize the PCIe wifi device. Normally, this is done +during the early stages of booting linux, because the necessary init code +is read from the memory mapped SPI and passed to pci_enable_ath9k_fixup. +However,this isn't possible for devices which have the init code for the +Atheros chip stored on NAND in an UBI volume. Hence, this module can be +used to initialze the chip when the user-space is ready to extract the +init code. + +Signed-off-by: Martin Blumenstingl +Signed-off-by: Christian Lamparter +--- + drivers/misc/Kconfig | 12 ++++++++++++ + drivers/misc/Makefile | 1 + + 2 files changed, 13 insertions(+) + +--- a/drivers/misc/Kconfig ++++ b/drivers/misc/Kconfig +@@ -151,6 +151,18 @@ config SGI_IOC4 + If you have an SGI Altix with an IOC4-based card say Y. + Otherwise say N. + ++config OWL_LOADER ++ tristate "Owl loader for initializing Atheros PCI(e) Wifi chips" ++ depends on PCI ++ ---help--- ++ This kernel module helps to initialize certain Qualcomm ++ Atheros' PCI(e) Wifi chips, which have the init data ++ (which contains the PCI device ID for example) stored ++ together with the calibration data in the file system. ++ ++ This is necessary for devices like the Cisco Meraki Z1, say M. ++ Otherwise say N. ++ + config TIFM_CORE + tristate "TI Flash Media interface support" + depends on PCI +--- a/drivers/misc/Makefile ++++ b/drivers/misc/Makefile +@@ -13,6 +13,7 @@ obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib + obj-$(CONFIG_DUMMY_IRQ) += dummy-irq.o + obj-$(CONFIG_ICS932S401) += ics932s401.o + obj-$(CONFIG_LKDTM) += lkdtm.o ++obj-$(CONFIG_OWL_LOADER) += owl-loader.o + obj-$(CONFIG_TIFM_CORE) += tifm_core.o + obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o + obj-$(CONFIG_PHANTOM) += phantom.o -- cgit v1.2.3