From 1e570a9288856bcd288a80115f2233c9c785706c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 18 Oct 2008 21:43:30 +0000 Subject: change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers. SVN-Revision: 13010 --- .../files-2.6.26/drivers/net/phy/adm6996.h | 105 --------------------- 1 file changed, 105 deletions(-) delete mode 100644 target/linux/generic-2.6/files-2.6.26/drivers/net/phy/adm6996.h (limited to 'target/linux/generic-2.6/files-2.6.26/drivers/net/phy/adm6996.h') diff --git a/target/linux/generic-2.6/files-2.6.26/drivers/net/phy/adm6996.h b/target/linux/generic-2.6/files-2.6.26/drivers/net/phy/adm6996.h deleted file mode 100644 index e074901517..0000000000 --- a/target/linux/generic-2.6/files-2.6.26/drivers/net/phy/adm6996.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * ADM6996 switch driver - * - * Copyright (c) 2008 Felix Fietkau - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License v2 as published by the - * Free Software Foundation - */ -#ifndef __ADM6996_H -#define __ADM6996_H - -#define ADM_PHY_PORTS 5 -#define ADM_CPU_PORT 5 -#define ADM_WAN_PORT 0 /* FIXME: dynamic ? */ - -enum admreg { - ADM_EEPROM_BASE = 0x0, - ADM_P0_CFG = ADM_EEPROM_BASE + 1, - ADM_P1_CFG = ADM_EEPROM_BASE + 3, - ADM_P2_CFG = ADM_EEPROM_BASE + 5, - ADM_P3_CFG = ADM_EEPROM_BASE + 7, - ADM_P4_CFG = ADM_EEPROM_BASE + 8, - ADM_P5_CFG = ADM_EEPROM_BASE + 9, - ADM_EEPROM_EXT_BASE = 0x40, - ADM_COUNTER_BASE = 0xa0, - ADM_SIG0 = ADM_COUNTER_BASE + 0, - ADM_SIG1 = ADM_COUNTER_BASE + 1, - ADM_PHY_BASE = 0x200, -#define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n)) -}; - -/* Chip identification patterns */ -#define ADM_SIG0_MASK 0xfff0 -#define ADM_SIG0_VAL 0x1020 -#define ADM_SIG1_MASK 0xffff -#define ADM_SIG1_VAL 0x0007 - -enum { - ADM_PHYCFG_COLTST = (1 << 7), /* Enable collision test */ - ADM_PHYCFG_DPLX = (1 << 8), /* Enable full duplex */ - ADM_PHYCFG_ANEN_RST = (1 << 9), /* Restart auto negotiation (self clear) */ - ADM_PHYCFG_ISO = (1 << 10), /* Isolate PHY */ - ADM_PHYCFG_PDN = (1 << 11), /* Power down PHY */ - ADM_PHYCFG_ANEN = (1 << 12), /* Enable auto negotiation */ - ADM_PHYCFG_SPEED_100 = (1 << 13), /* Enable 100 Mbit/s */ - ADM_PHYCFG_LPBK = (1 << 14), /* Enable loopback operation */ - ADM_PHYCFG_RST = (1 << 15), /* Reset the port (self clear) */ - ADM_PHYCFG_INIT = ( - ADM_PHYCFG_RST | - ADM_PHYCFG_SPEED_100 | - ADM_PHYCFG_ANEN | - ADM_PHYCFG_ANEN_RST - ) -}; - -enum { - ADM_PORTCFG_FC = (1 << 0), /* Enable 802.x flow control */ - ADM_PORTCFG_AN = (1 << 1), /* Enable auto-negotiation */ - ADM_PORTCFG_SPEED_100 = (1 << 2), /* Enable 100 Mbit/s */ - ADM_PORTCFG_DPLX = (1 << 3), /* Enable full duplex */ - ADM_PORTCFG_OT = (1 << 4), /* Output tagged packets */ - ADM_PORTCFG_PD = (1 << 5), /* Port disable */ - ADM_PORTCFG_TV_PRIO = (1 << 6), /* 0 = VLAN based priority - * 1 = TOS based priority */ - ADM_PORTCFG_PPE = (1 << 7), /* Port based priority enable */ - ADM_PORTCFG_PP_S = (1 << 8), /* Port based priority, 2 bits */ - ADM_PORTCFG_PVID_BASE = (1 << 10), /* Primary VLAN id, 4 bits */ - ADM_PORTCFG_FSE = (1 << 14), /* Fx select enable */ - ADM_PORTCFG_CAM = (1 << 15), /* Crossover Auto MDIX */ - - ADM_PORTCFG_INIT = ( - ADM_PORTCFG_FC | - ADM_PORTCFG_AN | - ADM_PORTCFG_SPEED_100 | - ADM_PORTCFG_DPLX | - ADM_PORTCFG_CAM - ), - ADM_PORTCFG_CPU = ( - ADM_PORTCFG_FC | - ADM_PORTCFG_SPEED_100 | - ADM_PORTCFG_OT | - ADM_PORTCFG_DPLX - ), -}; - -#define ADM_PORTCFG_PPID(N) ((n & 0x3) << 8) -#define ADM_PORTCFG_PVID(n) ((n & 0xf) << 10) - -static const u8 adm_portcfg[] = { - [0] = ADM_P0_CFG, - [1] = ADM_P1_CFG, - [2] = ADM_P2_CFG, - [3] = ADM_P3_CFG, - [4] = ADM_P4_CFG, - [5] = ADM_P5_CFG, -}; - -/* - * Split the register address in phy id and register - * it will get combined again by the mdio bus op - */ -#define PHYADDR(_reg) ((_reg >> 5) & 0xff), (_reg & 0x1f) - -#endif -- cgit v1.2.3