From 95c5443b843c7875794c17aeba33213b71ba4dbb Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 26 Jun 2010 20:42:18 +0000 Subject: remove generic linux 2.4 support SVN-Revision: 21948 --- .../generic-2.4/patches/201-hfc_usb_backport.patch | 2661 -------------------- 1 file changed, 2661 deletions(-) delete mode 100644 target/linux/generic-2.4/patches/201-hfc_usb_backport.patch (limited to 'target/linux/generic-2.4/patches/201-hfc_usb_backport.patch') diff --git a/target/linux/generic-2.4/patches/201-hfc_usb_backport.patch b/target/linux/generic-2.4/patches/201-hfc_usb_backport.patch deleted file mode 100644 index c2d62f6107..0000000000 --- a/target/linux/generic-2.4/patches/201-hfc_usb_backport.patch +++ /dev/null @@ -1,2661 +0,0 @@ ---- a/drivers/Makefile -+++ b/drivers/Makefile -@@ -38,7 +38,7 @@ subdir-$(CONFIG_FUSION) += message/fusi - subdir-$(CONFIG_MD) += md - subdir-$(CONFIG_IEEE1394) += ieee1394 - subdir-$(CONFIG_PNP) += pnp --subdir-$(CONFIG_ISDN_BOOL) += isdn -+subdir-$(CONFIG_ISDN) += isdn - subdir-$(CONFIG_ATM) += atm - subdir-$(CONFIG_FC4) += fc4 - ---- a/drivers/isdn/hisax/hfc_usb.c -+++ b/drivers/isdn/hisax/hfc_usb.c -@@ -1,13 +1,11 @@ --/* $Id: hfc_usb.c,v 2.3 2001/07/06 21:30:11 werner Exp $ -+/* -+ * hfc_usb.c - * -+ * modular HiSax ISDN driver for Colognechip HFC-USB chip - * -- * -- * Author (C) 2001 Werner Cornelius (werner@isdn-development.de) -- * modular driver for Colognechip HFC-USB chip -- * as plugin for HiSax isdn driver -- * type approval valid for HFC-S USB based TAs -- * -- * Copyright 2001 by Werner Cornelius (werner@isdn-development.de) -+ * Authors : Peter Sprenger (sprenger@moving-byters.de) -+ * Martin Bachem (info@colognechip.com) -+ * based on the first hfc_usb driver of Werner Cornelius (werner@isdn-development.de) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by -@@ -23,70 +21,90 @@ - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * -- */ -+ * 2005_Mar_16 grsch -+ * ported 2.6.8 hfc_usb.c to 2.4.20 format -+ * Gregor Schaffrath -+*/ -+ - - #include - #include - #include - #include --#include - #include - #include "hisax.h" - #include - #include --#include - #include - #include - #include - #include -+#include "hisax_if.h" - #include "hisax_loadable.h" - -+static const char *hfcusb_revision = "4.0"; -+ -+/* -+ to enable much mire debug messages in this driver, define -+ VERBOSE_USB_DEBUG and VERBOSE_ISDN_DEBUG -+ below -+*/ -+ -+#define VERBOSE_USB_DEBUG -+#define VERBOSE_ISDN_DEBUG -+ - #define INCLUDE_INLINE_FUNCS - -+#define TRUE 1 -+#define FALSE 0 -+ -+ - /***********/ - /* defines */ - /***********/ --#define HFC_CTRL_TIMEOUT 5 /* 5ms timeout writing/reading regs */ --#define HFC_TIMER_T3 7000 /* timeout for l1 activation timer */ -- --#define HFCUSB_L1_STATECHANGE 0 /* L1 state changed */ --#define HFCUSB_L1_DRX 1 /* D-frame received */ --#define HFCUSB_L1_ERX 2 /* E-frame received */ --#define HFCUSB_L1_DTX 4 /* D-frames completed */ -- --#define MAX_BCH_SIZE 2048 /* allowed B-channel packet size */ -- --#define HFCUSB_RX_THRESHOLD 64 /* threshold for fifo report bit rx */ --#define HFCUSB_TX_THRESHOLD 64 /* threshold for fifo report bit tx */ -- --#define HFCUSB_CHIP_ID 0x16 /* Chip ID register index */ --#define HFCUSB_CIRM 0x00 /* cirm register index */ --#define HFCUSB_USB_SIZE 0x07 /* int length register */ --#define HFCUSB_USB_SIZE_I 0x06 /* iso length register */ --#define HFCUSB_F_CROSS 0x0b /* bit order register */ --#define HFCUSB_CLKDEL 0x37 /* bit delay register */ --#define HFCUSB_CON_HDLC 0xfa /* channel connect register */ -+#define HFC_CTRL_TIMEOUT 20 //(HZ * USB_CTRL_GET_TIMEOUT) -+/* 5ms timeout writing/reading regs */ -+#define HFC_TIMER_T3 8000 /* timeout for l1 activation timer */ -+#define HFC_TIMER_T4 500 /* time for state change interval */ -+ -+#define HFCUSB_L1_STATECHANGE 0 /* L1 state changed */ -+#define HFCUSB_L1_DRX 1 /* D-frame received */ -+#define HFCUSB_L1_ERX 2 /* E-frame received */ -+#define HFCUSB_L1_DTX 4 /* D-frames completed */ -+ -+#define MAX_BCH_SIZE 2048 /* allowed B-channel packet size */ -+ -+#define HFCUSB_RX_THRESHOLD 64 /* threshold for fifo report bit rx */ -+#define HFCUSB_TX_THRESHOLD 64 /* threshold for fifo report bit tx */ -+ -+#define HFCUSB_CHIP_ID 0x16 /* Chip ID register index */ -+#define HFCUSB_CIRM 0x00 /* cirm register index */ -+#define HFCUSB_USB_SIZE 0x07 /* int length register */ -+#define HFCUSB_USB_SIZE_I 0x06 /* iso length register */ -+#define HFCUSB_F_CROSS 0x0b /* bit order register */ -+#define HFCUSB_CLKDEL 0x37 /* bit delay register */ -+#define HFCUSB_CON_HDLC 0xfa /* channel connect register */ - #define HFCUSB_HDLC_PAR 0xfb --#define HFCUSB_SCTRL 0x31 /* S-bus control register (tx) */ --#define HFCUSB_SCTRL_E 0x32 /* same for E and special funcs */ --#define HFCUSB_SCTRL_R 0x33 /* S-bus control register (rx) */ --#define HFCUSB_F_THRES 0x0c /* threshold register */ --#define HFCUSB_FIFO 0x0f /* fifo select register */ --#define HFCUSB_F_USAGE 0x1a /* fifo usage register */ -+#define HFCUSB_SCTRL 0x31 /* S-bus control register (tx) */ -+#define HFCUSB_SCTRL_E 0x32 /* same for E and special funcs */ -+#define HFCUSB_SCTRL_R 0x33 /* S-bus control register (rx) */ -+#define HFCUSB_F_THRES 0x0c /* threshold register */ -+#define HFCUSB_FIFO 0x0f /* fifo select register */ -+#define HFCUSB_F_USAGE 0x1a /* fifo usage register */ - #define HFCUSB_MST_MODE0 0x14 - #define HFCUSB_MST_MODE1 0x15 - #define HFCUSB_P_DATA 0x1f - #define HFCUSB_INC_RES_F 0x0e - #define HFCUSB_STATES 0x30 - --#define HFCUSB_CHIPID 0x40 /* ID value of HFC-USB */ -+#define HFCUSB_CHIPID 0x40 /* ID value of HFC-USB */ - - /******************/ - /* fifo registers */ - /******************/ --#define HFCUSB_NUM_FIFOS 8 /* maximum number of fifos */ --#define HFCUSB_B1_TX 0 /* index for B1 transmit bulk/int */ --#define HFCUSB_B1_RX 1 /* index for B1 receive bulk/int */ -+#define HFCUSB_NUM_FIFOS 8 /* maximum number of fifos */ -+#define HFCUSB_B1_TX 0 /* index for B1 transmit bulk/int */ -+#define HFCUSB_B1_RX 1 /* index for B1 receive bulk/int */ - #define HFCUSB_B2_TX 2 - #define HFCUSB_B2_RX 3 - #define HFCUSB_D_TX 4 -@@ -94,198 +112,162 @@ - #define HFCUSB_PCM_TX 6 - #define HFCUSB_PCM_RX 7 - --/************/ --/* LED mask */ --/************/ --#define LED_DRIVER 0x1 --#define LED_L1 0x2 --#define LED_BCH 0x4 -+/* -+* used to switch snd_transfer_mode for different TA modes e.g. the Billion USB TA just -+* supports ISO out, while the Cologne Chip EVAL TA just supports BULK out -+*/ -+#define USB_INT 0 -+#define USB_BULK 1 -+#define USB_ISOC 2 -+ -+#define ISOC_PACKETS_D 8 -+#define ISOC_PACKETS_B 8 -+#define ISO_BUFFER_SIZE 128 -+ -+// ISO send definitions -+#define SINK_MAX 68 -+#define SINK_MIN 48 -+#define SINK_DMIN 12 -+#define SINK_DMAX 18 -+#define BITLINE_INF (-64*8) -+ -+ -+ - - /**********/ - /* macros */ - /**********/ --#define Write_hfc(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_out_pipe,0,0x40,(c),(b),0,0,HFC_CTRL_TIMEOUT) --#define Read_hfc(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_in_pipe,1,0xC0,0,(b),(c),1,HFC_CTRL_TIMEOUT) -- --#ifdef COMPAT_HAS_USB_IDTAB --/****************************************/ --/* data defining the devices to be used */ --/****************************************/ --static __devinitdata const struct usb_device_id hfc_usb_idtab[3] = { -- {USB_DEVICE(0x959, 0x2bd0)}, /* Colognechip ROM */ -- {USB_DEVICE(0x7b0, 0x0006)}, /* USB TA 128 */ -- {} /* end with an all-zeroes entry */ --}; --#endif -+#define write_usb(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_out_pipe,0,0x40,(c),(b),NULL,0,HFC_CTRL_TIMEOUT) -+#define read_usb(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_in_pipe,1,0xC0,0,(b),(c),1,HFC_CTRL_TIMEOUT) - - /*************************************************/ - /* entry and size of output/input control buffer */ - /*************************************************/ - #define HFC_CTRL_BUFSIZE 32 --typedef struct { -+typedef struct -+{ - __u8 hfc_reg; /* register number */ - __u8 reg_val; /* value to be written (or read) */ -+ int action; /* data for action handler */ -+ - } ctrl_buft; - -+typedef struct -+{ -+ int vendor; // vendor id -+ int prod_id; // product id -+ char *vend_name; // vendor string -+ __u8 led_scheme; // led display scheme -+ __u8 led_invert; // invert led aux port settings -+ __u8 led_bits[8]; // array of 8 possible LED bitmask settings -+ -+} vendor_data; -+ - /***************************************************************/ - /* structure defining input+output fifos (interrupt/bulk mode) */ - /***************************************************************/ --struct hfcusb_data; /* forward definition */ --typedef struct { -- int fifonum; /* fifo index attached to this structure */ -- __u8 fifo_mask; /* mask for this fifo */ -- int active; /* fifo is currently active */ -+ -+struct usb_fifo; /* forward definition */ -+typedef struct iso_urb_struct -+{ -+ struct urb *purb; -+ __u8 buffer[ISO_BUFFER_SIZE]; /* buffer incoming/outgoing data */ -+ struct usb_fifo *owner_fifo; // pointer to owner fifo -+} iso_urb_struct; -+ -+ -+struct hfcusb_data; /* forward definition */ -+typedef struct usb_fifo -+{ -+ int fifonum; /* fifo index attached to this structure */ -+ int active; /* fifo is currently active */ - struct hfcusb_data *hfc; /* pointer to main structure */ -- int pipe; /* address of endpoint */ -- __u8 usb_maxlen; /* maximum length for usb transfer */ -- int max_size; /* maximum size of receive/send packet */ -- int transmode; /* transparent mode selected */ -- int framenum; /* number of frame when last tx completed */ -- int rx_offset; /* offset inside rx buffer */ -- int next_complete; /* complete marker */ -- __u8 *act_ptr; /* pointer to next data */ -- __u8 intervall; /* interrupt interval */ -- struct sk_buff *buff; /* actual used buffer */ -- urb_t urb; /* transfer structure for usb routines */ -- __u8 buffer[128]; /* buffer incoming/outgoing data */ -+ int pipe; /* address of endpoint */ -+ __u8 usb_packet_maxlen; /* maximum length for usb transfer */ -+ unsigned int max_size; /* maximum size of receive/send packet */ -+ __u8 intervall; /* interrupt interval */ -+ struct sk_buff *skbuff; /* actual used buffer */ -+ struct urb *urb; /* transfer structure for usb routines */ -+ __u8 buffer[128]; /* buffer incoming/outgoing data */ -+ int bit_line; /* how much bits are in the fifo? */ -+ -+ volatile __u8 usb_transfer_mode;/* switched between ISO and INT */ -+ iso_urb_struct iso[2]; /* need two urbs to have one always for pending */ -+ struct hisax_if *hif; /* hisax interface */ -+ int delete_flg; /* only delete skbuff once */ -+ int last_urblen; /* remember length of last packet */ -+ - } usb_fifo; - -+ - /*********************************************/ - /* structure holding all data for one device */ - /*********************************************/ --typedef struct hfcusb_data { -- struct hisax_drvreg regd; /* register data and callbacks */ -- struct usb_device *dev; /* our device */ -- int if_used; /* used interface number */ -- int alt_used; /* used alternate config */ -- int ctrl_paksize; /* control pipe packet size */ -+typedef struct hfcusb_data -+{ -+ // HiSax Interface for loadable Layer1 drivers -+ struct hisax_d_if d_if; /* see hisax_if.h */ -+ struct hisax_b_if b_if[2]; /* see hisax_if.h */ -+ int protocol; -+ -+ struct usb_device *dev; /* our device */ -+ int if_used; /* used interface number */ -+ int alt_used; /* used alternate config */ -+ int ctrl_paksize; /* control pipe packet size */ - int ctrl_in_pipe, ctrl_out_pipe; /* handles for control pipe */ -+ int cfg_used; /* configuration index used */ -+ int vend_idx; // vendor found -+ -+ int b_mode[2]; // B-channel mode -+ -+ int l1_activated; // layer 1 activated -+ -+ int packet_size,iso_packet_size; - - /* control pipe background handling */ - ctrl_buft ctrl_buff[HFC_CTRL_BUFSIZE]; /* buffer holding queued data */ -- volatile int ctrl_in_idx, ctrl_out_idx, ctrl_cnt; /* input/output pointer + count */ -- urb_t ctrl_urb; /* transfer structure for control channel */ -- devrequest ctrl_write; /* buffer for control write request */ -- devrequest ctrl_read; /* same for read request */ -- -- volatile __u8 dfifo_fill; /* value read from tx d-fifo */ -- volatile __u8 active_fifos; /* fifos currently active as bit mask */ -- volatile __u8 threshold_mask; /* threshold actually reported */ -- volatile __u8 service_request; /* fifo needs service from task */ -- volatile __u8 ctrl_fifo; /* last selected fifo */ -- volatile __u8 bch_enables; /* or mask for sctrl_r and sctrl register values */ -- volatile __u8 led_req; /* request status of adapters leds */ -- volatile __u8 led_act; /* active status of adapters leds */ -+ volatile int ctrl_in_idx, ctrl_out_idx, -+ ctrl_cnt; /* input/output pointer + count */ -+ struct urb *ctrl_urb; /* transfer structure for control channel */ -+ -+ struct usb_ctrlrequest ctrl_write; /* buffer for control write request */ -+ struct usb_ctrlrequest ctrl_read; /* same for read request */ -+ -+ __u8 led_state,led_new_data,led_b_active; -+ -+ volatile __u8 threshold_mask; /* threshold actually reported */ -+ volatile __u8 bch_enables; /* or mask for sctrl_r and sctrl register values */ -+ - usb_fifo fifos[HFCUSB_NUM_FIFOS]; /* structure holding all fifo data */ - -- /* layer 1 activation/deactivation handling */ -- volatile __u8 l1_state; /* actual l1 state */ -- volatile ulong l1_event; /* event mask */ -- struct tq_struct l1_tq; /* l1 bh structure */ -- struct timer_list t3_timer; /* timer for activation/deactivation */ -- struct timer_list t4_timer; /* timer for activation/deactivation */ -+ volatile __u8 l1_state; /* actual l1 state */ -+ struct timer_list t3_timer; /* timer 3 for activation/deactivation */ -+ struct timer_list t4_timer; /* timer 4 for activation/deactivation */ -+ struct timer_list led_timer; /* timer flashing leds */ -+ - } hfcusb_data; - --#if 0 --static void --usb_dump_urb(purb_t purb) --{ -- printk("urb :%p\n", purb); -- printk("next :%p\n", purb->next); -- printk("dev :%p\n", purb->dev); -- printk("pipe :%08X\n", purb->pipe); -- printk("status :%d\n", purb->status); -- printk("transfer_flags :%08X\n", purb->transfer_flags); -- printk("transfer_buffer :%p\n", purb->transfer_buffer); -- printk("transfer_buffer_length:%d\n", -- purb->transfer_buffer_length); -- printk("actual_length :%d\n", purb->actual_length); -- printk("setup_packet :%p\n", purb->setup_packet); -- printk("start_frame :%d\n", purb->start_frame); -- printk("number_of_packets :%d\n", purb->number_of_packets); -- printk("interval :%d\n", purb->interval); -- printk("error_count :%d\n", purb->error_count); -- printk("context :%p\n", purb->context); -- printk("complete :%p\n", purb->complete); --} --#endif - --/*************************************************************************/ --/* bottom half handler for L1 activation/deactiavtaion + D-chan + E-chan */ --/*************************************************************************/ --static void --usb_l1d_bh(hfcusb_data * hfc) --{ -+static void collect_rx_frame(usb_fifo *fifo,__u8 *data,int len,int finish); -+ - -- while (hfc->l1_event) { -- if (test_and_clear_bit -- (HFCUSB_L1_STATECHANGE, &hfc->l1_event)) { -- if (hfc->l1_state == 7) -- hfc->led_req |= LED_L1; -- else -- hfc->led_req &= ~LED_L1; -- if ((hfc->l1_state == 7) || -- (hfc->l1_state == 3)) -- hfc->regd.dch_l1l2(hfc->regd.arg_hisax, -- (hfc->l1_state == -- 7) ? (PH_ACTIVATE | -- INDICATION) -- : (PH_DEACTIVATE | INDICATION), -- NULL); -- } -- if (test_and_clear_bit(HFCUSB_L1_DRX, &hfc->l1_event)) { -- hfc->regd.dch_l1l2(hfc->regd.arg_hisax, -- PH_DATA | INDICATION, -- (void *) 0); -- } -- if (test_and_clear_bit(HFCUSB_L1_ERX, &hfc->l1_event)) { -- hfc->regd.dch_l1l2(hfc->regd.arg_hisax, -- PH_DATA | INDICATION, -- (void *) 1); -- } -- if (test_and_clear_bit(HFCUSB_L1_DTX, &hfc->l1_event)) { -- hfc->regd.dch_l1l2(hfc->regd.arg_hisax, -- PH_DATA | CONFIRM, NULL); -- } -- } /* while */ --} /* usb_l1d_bh */ - - /******************************************************/ - /* start next background transfer for control channel */ - /******************************************************/ --static void --ctrl_start_transfer(hfcusb_data * hfc) -+static void ctrl_start_transfer(hfcusb_data * hfc) - { -- -- if (hfc->ctrl_cnt) { -- switch (hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg) { -- case HFCUSB_F_USAGE: -- hfc->ctrl_urb.pipe = hfc->ctrl_in_pipe; -- hfc->ctrl_urb.setup_packet = -- (u_char *) & hfc->ctrl_read; -- hfc->ctrl_urb.transfer_buffer_length = 1; -- hfc->ctrl_read.index = -- hfc->ctrl_buff[hfc->ctrl_out_idx]. -- hfc_reg; -- hfc->ctrl_urb.transfer_buffer = -- (char *) &hfc->dfifo_fill; -- break; -- -- default: /* write register */ -- hfc->ctrl_urb.pipe = hfc->ctrl_out_pipe; -- hfc->ctrl_urb.setup_packet = -- (u_char *) & hfc->ctrl_write; -- hfc->ctrl_urb.transfer_buffer = NULL; -- hfc->ctrl_urb.transfer_buffer_length = 0; -- hfc->ctrl_write.index = -- hfc->ctrl_buff[hfc->ctrl_out_idx]. -- hfc_reg; -- hfc->ctrl_write.value = -- hfc->ctrl_buff[hfc->ctrl_out_idx]. -- reg_val; -- break; -- } -- usb_submit_urb(&hfc->ctrl_urb); /* start transfer */ -+ int err; -+ if(hfc->ctrl_cnt) -+ { -+ hfc->ctrl_urb->pipe = hfc->ctrl_out_pipe; -+ hfc->ctrl_urb->setup_packet = (u_char *) & hfc->ctrl_write; -+ hfc->ctrl_urb->transfer_buffer = NULL; -+ hfc->ctrl_urb->transfer_buffer_length = 0; -+ hfc->ctrl_write.wIndex = hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg; -+ hfc->ctrl_write.wValue = hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val; -+ err = usb_submit_urb(hfc->ctrl_urb); /* start transfer */ -+ printk(KERN_DEBUG "ctrl_start_transfer: submit %d\n", err); - } - } /* ctrl_start_transfer */ - -@@ -293,897 +275,1418 @@ ctrl_start_transfer(hfcusb_data * hfc) - /* queue a control transfer request */ - /* return 0 on success. */ - /************************************/ --static int --queue_control_request(hfcusb_data * hfc, __u8 reg, __u8 val) -+static int queue_control_request(hfcusb_data * hfc, __u8 reg, __u8 val,int action) - { - ctrl_buft *buf; - -- if (hfc->ctrl_cnt >= HFC_CTRL_BUFSIZE) -- return (1); /* no space left */ -- buf = hfc->ctrl_buff + hfc->ctrl_in_idx; /* pointer to new index */ -+#ifdef VERBOSE_USB_DEBUG -+ printk ("HFC_USB: queue_control_request reg: %x, val: %x\n", reg, val); -+#endif -+ -+ if(hfc->ctrl_cnt >= HFC_CTRL_BUFSIZE) return(1); /* no space left */ -+ buf = &hfc->ctrl_buff[hfc->ctrl_in_idx]; /* pointer to new index */ - buf->hfc_reg = reg; - buf->reg_val = val; -+ buf->action=action; - if (++hfc->ctrl_in_idx >= HFC_CTRL_BUFSIZE) - hfc->ctrl_in_idx = 0; /* pointer wrap */ - if (++hfc->ctrl_cnt == 1) - ctrl_start_transfer(hfc); -- return (0); --} /* queue_control_request */ -+ return(0); -+} /* queue_control_request */ - --/**************************************/ --/* called when timer t3 or t4 expires */ --/**************************************/ --static void --l1_timer_expire(hfcusb_data * hfc) --{ -- if (timer_pending(&hfc->t4_timer)) -- del_timer(&hfc->t4_timer); -- queue_control_request(hfc, HFCUSB_STATES, 0x40); -- test_and_set_bit(HFCUSB_L1_STATECHANGE, -- &hfc->l1_event); -- queue_task(&hfc->l1_tq, &tq_immediate); -- mark_bh(IMMEDIATE_BH); --} /* l1_timer_expire */ -- --/**************************************************/ --/* (re)fills a tx-fifo urb. Queuing is done later */ --/**************************************************/ --static void --fill_tx_urb(usb_fifo * fifo) --{ -- struct sk_buff *skb; -- long flags; -- int i, ii = 0; -- -- fifo->urb.dev = fifo->hfc->dev; -- if ((fifo->buff) -- && (fifo->urb.transfer_buffer_length < fifo->usb_maxlen)) { -- switch (fifo->fifonum) { -- case HFCUSB_B1_TX: -- case HFCUSB_B2_TX: -- skb = fifo->buff; -- fifo->buff = NULL; -- fifo->hfc->regd.bch_l1l2(fifo->hfc->regd. -- arg_hisax, -- (fifo->fifonum == -- HFCUSB_B1_TX) ? 0 -- : 1, -- (PH_DATA | -- CONFIRM), -- (void *) skb); -- fifo->hfc->service_request |= -- fifo->fifo_mask; -- return; -- case HFCUSB_D_TX: -- dev_kfree_skb_any(fifo->buff); -- fifo->buff = NULL; -- save_flags(flags); -- cli(); -- fifo->hfc->dfifo_fill = 0xff; /* currently invalid data */ -- queue_control_request(fifo->hfc, -- HFCUSB_FIFO, -- HFCUSB_D_TX); -- queue_control_request(fifo->hfc, -- HFCUSB_F_USAGE, 0); -- restore_flags(flags); -- return; -- default: -- return; /* error, invalid fifo */ -- } -+ -+static int control_action_handler(hfcusb_data *hfc,int reg,int val,int action) -+{ -+ if(!action) return(1); // no action defined -+ -+ return(0); -+} -+ -+ -+/***************************************************************/ -+/* control completion routine handling background control cmds */ -+/***************************************************************/ -+static void ctrl_complete(struct urb *urb) -+{ -+ hfcusb_data *hfc = (hfcusb_data *) urb->context; -+ ctrl_buft *buf; -+ -+ printk(KERN_DEBUG "ctrl_complete cnt %d\n", hfc->ctrl_cnt); -+ urb->dev = hfc->dev; -+ if(hfc->ctrl_cnt) -+ { -+ buf=&hfc->ctrl_buff[hfc->ctrl_out_idx]; -+ control_action_handler(hfc,buf->hfc_reg,buf->reg_val,buf->action); -+ -+ hfc->ctrl_cnt--; /* decrement actual count */ -+ if(++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE) hfc->ctrl_out_idx = 0; /* pointer wrap */ -+ -+ ctrl_start_transfer(hfc); /* start next transfer */ -+ } -+} /* ctrl_complete */ -+ -+ -+ -+#define LED_OFF 0 // no LED support -+#define LED_SCHEME1 1 // LED standard scheme -+#define LED_SCHEME2 2 // not used yet... -+ -+#define LED_POWER_ON 1 -+#define LED_POWER_OFF 2 -+#define LED_S0_ON 3 -+#define LED_S0_OFF 4 -+#define LED_B1_ON 5 -+#define LED_B1_OFF 6 -+#define LED_B1_DATA 7 -+#define LED_B2_ON 8 -+#define LED_B2_OFF 9 -+#define LED_B2_DATA 10 -+ -+#define LED_NORMAL 0 // LEDs are normal -+#define LED_INVERTED 1 // LEDs are inverted -+ -+// time for LED flashing -+#define LED_TIME 250 -+ -+vendor_data vdata[]= -+{ -+ {0x959, 0x2bd0, "ISDN USB TA (Cologne Chip HFC-S USB based)", LED_OFF,LED_NORMAL,{4,0,2,1}}, /* CologneChip Eval TA */ -+ {0x7b0, 0x0007, "Billion tiny USB ISDN TA 128", LED_SCHEME1, LED_INVERTED, {8,0x40,0x20,0x10}}, /* Billion TA */ -+ {0x742, 0x2008, "Stollmann USB TA", LED_SCHEME1, LED_NORMAL, {4,0,2,1}}, /* Stollmann TA */ -+ {0x8e3, 0x0301, "Olitec USB RNIS", LED_SCHEME1, LED_NORMAL, {2,0,1,4}}, /* Olitec TA */ -+ {0x675, 0x1688, "DrayTec USB ISDN TA", LED_SCHEME1, LED_NORMAL, {4,0,2,1}}, /* Draytec TA */ -+ {0x7fa, 0x0846, "Bewan Modem RNIS USB", LED_SCHEME1, LED_INVERTED, {8,0x40,0x20,0x10}}, /* Bewan TA */ -+ {0} // EOL element -+}; -+ -+/***************************************************/ -+/* write led data to auxport & invert if necessary */ -+/***************************************************/ -+static void write_led(hfcusb_data * hfc,__u8 led_state) -+{ -+ if(led_state!=hfc->led_state) -+ { -+ hfc->led_state=led_state; -+ queue_control_request(hfc, HFCUSB_P_DATA,(vdata[hfc->vend_idx].led_invert) ? ~led_state : led_state,1); -+ } -+} -+ -+/******************************************/ -+/* invert B-channel LEDs if data is sent */ -+/******************************************/ -+static void led_timer(hfcusb_data * hfc) -+{ -+ static int cnt=0; -+ __u8 led_state=hfc->led_state; -+ -+ if(cnt) -+ { -+ if(hfc->led_b_active&1) led_state|=vdata[hfc->vend_idx].led_bits[2]; -+ if(hfc->led_b_active&2) led_state|=vdata[hfc->vend_idx].led_bits[3]; -+ } -+ else -+ { -+ if(!(hfc->led_b_active&1) || hfc->led_new_data&1) led_state&=~vdata[hfc->vend_idx].led_bits[2]; -+ if(!(hfc->led_b_active&2) || hfc->led_new_data&2) led_state&=~vdata[hfc->vend_idx].led_bits[3]; - } - -- /* check if new buffer needed */ -- if (!fifo->buff) { -- switch (fifo->fifonum) { -- case HFCUSB_B1_TX: -- if (fifo->hfc->regd.bsk[0]) -- fifo->buff = *fifo->hfc->regd.bsk[0]; /* B1-channel tx buffer */ -+ write_led(hfc,led_state); -+ hfc->led_new_data=0; -+ -+ cnt=!cnt; -+ // restart 4 hz timer -+ hfc->led_timer.expires = jiffies + (LED_TIME * HZ) / 1000; -+ if(!timer_pending(&hfc->led_timer)) add_timer(&hfc->led_timer); -+} -+ -+/**************************/ -+/* handle LED requests */ -+/**************************/ -+static void handle_led(hfcusb_data * hfc,int event) -+{ -+ __u8 led_state=hfc->led_state; -+ -+ // if no scheme -> no LED action -+ if(vdata[hfc->vend_idx].led_scheme==LED_OFF) return; -+ -+ switch(event) -+ { -+ case LED_POWER_ON: -+ led_state|=vdata[hfc->vend_idx].led_bits[0]; -+ break; -+ case LED_POWER_OFF: // no Power off handling -+ break; -+ case LED_S0_ON: -+ led_state|=vdata[hfc->vend_idx].led_bits[1]; -+ break; -+ case LED_S0_OFF: -+ led_state&=~vdata[hfc->vend_idx].led_bits[1]; - break; -- case HFCUSB_B2_TX: -- if (fifo->hfc->regd.bsk[1]) -- fifo->buff = *fifo->hfc->regd.bsk[1]; /* B2-channel tx buffer */ -+ case LED_B1_ON: -+ hfc->led_b_active|=1; - break; -- case HFCUSB_D_TX: -- if (fifo->hfc->regd.dsq) -- fifo->buff = skb_dequeue(fifo->hfc->regd.dsq); /* D-channel tx queue */ -+ case LED_B1_OFF: -+ hfc->led_b_active&=~1; - break; -- default: -- return; /* error, invalid fifo */ -+ case LED_B1_DATA: -+ hfc->led_new_data|=1; -+ break; -+ case LED_B2_ON: -+ hfc->led_b_active|=2; -+ break; -+ case LED_B2_OFF: -+ hfc->led_b_active&=~2; -+ break; -+ case LED_B2_DATA: -+ hfc->led_new_data|=2; -+ break; -+ } -+ -+ write_led(hfc,led_state); -+} -+ -+/********************************/ -+/* called when timer t3 expires */ -+/********************************/ -+static void l1_timer_expire_t3(hfcusb_data * hfc) -+{ -+ //printk (KERN_INFO "HFC-USB: l1_timer_expire_t3\n"); -+ -+ hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,PH_DEACTIVATE | INDICATION,NULL); -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "PH_DEACTIVATE | INDICATION sent\n"); -+#endif -+ hfc->l1_activated=FALSE; -+ handle_led(hfc,LED_S0_OFF); -+} -+ -+/********************************/ -+/* called when timer t4 expires */ -+/********************************/ -+static void l1_timer_expire_t4(hfcusb_data * hfc) -+{ -+ //printk (KERN_INFO "HFC-USB: l1_timer_expire_t4\n"); -+ -+ hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,PH_DEACTIVATE | INDICATION,NULL); -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "PH_DEACTIVATE | INDICATION sent\n"); -+#endif -+ hfc->l1_activated=FALSE; -+ handle_led(hfc,LED_S0_OFF); -+} -+ -+/*****************************/ -+/* handle S0 state changes */ -+/*****************************/ -+static void state_handler(hfcusb_data * hfc,__u8 state) -+{ -+ __u8 old_state; -+ -+ old_state=hfc->l1_state; -+ -+ // range check -+ if(state==old_state || state<1 || state>8) return; -+ -+#ifdef VERBOSE_ISDN_DEBUG -+ printk(KERN_INFO "HFC-USB: new S0 state:%d old_state:%d\n",state,old_state); -+#endif -+ -+ if(state<4 || state==7 || state==8) -+ { -+ if(timer_pending(&hfc->t3_timer)) del_timer(&hfc->t3_timer); -+ //printk(KERN_INFO "HFC-USB: T3 deactivated\n"); -+ } -+ -+ if(state>=7) -+ { -+ if(timer_pending(&hfc->t4_timer)) del_timer(&hfc->t4_timer); -+ //printk(KERN_INFO "HFC-USB: T4 deactivated\n"); -+ } -+ -+ if(state==7 && !hfc->l1_activated) -+ { -+ hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,PH_ACTIVATE | INDICATION,NULL); -+ //printk(KERN_INFO "HFC-USB: PH_ACTIVATE | INDICATION sent\n"); -+ hfc->l1_activated=TRUE; -+ handle_led(hfc,LED_S0_ON); -+ } -+ else -+ if(state<=3 /* && activated*/) -+ { -+ if(old_state==7 || old_state==8) -+ { -+ //printk(KERN_INFO "HFC-USB: T4 activated\n"); -+ hfc->t4_timer.expires = jiffies + (HFC_TIMER_T4 * HZ) / 1000; -+ if(!timer_pending(&hfc->t4_timer)) add_timer(&hfc->t4_timer); - } -- if (!fifo->buff) { -- fifo->active = 0; /* we are inactive now */ -- fifo->hfc->active_fifos &= ~fifo->fifo_mask; -- if (fifo->fifonum == HFCUSB_D_TX) { -- test_and_set_bit(HFCUSB_L1_DTX, -- &fifo->hfc->l1_event); -- queue_task(&fifo->hfc->l1_tq, -- &tq_immediate); -- mark_bh(IMMEDIATE_BH); -- } -- return; -+ else -+ { -+ hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,PH_DEACTIVATE | INDICATION,NULL); -+ //printk(KERN_INFO "HFC-USB: PH_DEACTIVATE | INDICATION sent\n"); -+ hfc->l1_activated=FALSE; -+ handle_led(hfc,LED_S0_OFF); - } -- fifo->act_ptr = fifo->buff->data; /* start of data */ -- fifo->active = 1; -- ii = 1; -- fifo->hfc->active_fifos |= fifo->fifo_mask; -- fifo->hfc->service_request &= ~fifo->fifo_mask; -- } -- /* fillup the send buffer */ -- i = fifo->buff->len - (fifo->act_ptr - fifo->buff->data); /* remaining length */ -- fifo->buffer[0] = !fifo->transmode; /* not eof */ -- if (i > (fifo->usb_maxlen - ii)) { -- i = fifo->usb_maxlen - ii; -- } -- if (i) -- memcpy(fifo->buffer + ii, fifo->act_ptr, i); -- fifo->urb.transfer_buffer_length = i + ii; -- fifo->rx_offset = ii; --} /* fill_tx_urb */ -- --/************************************************/ --/* transmit completion routine for all tx fifos */ --/************************************************/ --static void --tx_complete(purb_t urb) -+ } -+ -+ hfc->l1_state=state; -+} -+ -+ -+/* prepare iso urb */ -+static void fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe, void *buf, -+ int num_packets, int packet_size, int interval, usb_complete_t complete, void *context) - { -- usb_fifo *fifo = (usb_fifo *) urb->context; /* pointer to our fifo */ -+ int k; - -- fifo->hfc->service_request &= ~fifo->fifo_mask; /* no further handling */ -- fifo->framenum = usb_get_current_frame_number(fifo->hfc->dev); -+ spin_lock_init(&urb->lock); // do we really need spin_lock_init ? -+ urb->dev = dev; -+ urb->pipe = pipe; -+ urb->complete = complete; -+ urb->number_of_packets = num_packets; -+ urb->transfer_buffer_length = packet_size * num_packets; -+ urb->context = context; -+ urb->transfer_buffer = buf; -+ urb->transfer_flags = 0; -+ urb->transfer_flags = USB_ISO_ASAP; -+ urb->actual_length = 0; -+ urb->interval = interval; -+ for (k = 0; k < num_packets; k++) { -+ urb->iso_frame_desc[k].offset = packet_size * k; -+ urb->iso_frame_desc[k].length = packet_size; -+ urb->iso_frame_desc[k].actual_length = 0; -+ } -+} - -- /* check for deactivation or error */ -- if ((!fifo->active) || (urb->status)) { -- fifo->hfc->active_fifos &= ~fifo->fifo_mask; /* we are inactive */ -- fifo->active = 0; -- if ((fifo->buff) && (fifo->fifonum == HFCUSB_D_TX)) { -- dev_kfree_skb_any(fifo->buff); -+/* allocs urbs and start isoc transfer with two pending urbs to avoid gaps in the transfer chain */ -+static int start_isoc_chain(usb_fifo * fifo, int num_packets_per_urb,usb_complete_t complete,int packet_size) -+{ -+ int i, k, errcode; -+ -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "HFC-USB: starting ISO-chain for Fifo %i\n", fifo->fifonum); -+#endif -+ -+ -+ // allocate Memory for Iso out Urbs -+ for (i = 0; i < 2; i++) { -+ if (!(fifo->iso[i].purb)) { -+ fifo->iso[i].purb = usb_alloc_urb(num_packets_per_urb); -+ fifo->iso[i].owner_fifo = (struct usb_fifo *) fifo; -+ -+ // Init the first iso -+ if (ISO_BUFFER_SIZE >= (fifo->usb_packet_maxlen * num_packets_per_urb)) -+ { -+ -+ fill_isoc_urb(fifo->iso[i].purb, fifo->hfc->dev, fifo->pipe, fifo->iso[i].buffer, -+ num_packets_per_urb, fifo->usb_packet_maxlen, fifo->intervall, -+ complete, &fifo->iso[i]); -+ -+ memset(fifo->iso[i].buffer, 0, sizeof(fifo->iso[i].buffer)); -+ -+ // defining packet delimeters in fifo->buffer -+ for(k = 0; k < num_packets_per_urb; k++) -+ { -+ fifo->iso[i].purb->iso_frame_desc[k].offset = k*packet_size; -+ fifo->iso[i].purb->iso_frame_desc[k].length = packet_size; -+ } -+ } - } -- fifo->buff = NULL; -- return; -+ -+ fifo->bit_line = BITLINE_INF; -+ -+ errcode = usb_submit_urb(fifo->iso[i].purb); -+ fifo->active = (errcode >= 0) ? 1 : 0; -+ if(errcode < 0) -+ { -+ printk(KERN_INFO "HFC-USB: error submitting ISO URB: %i.%i \n", errcode, i); -+ }; -+ - } -- fifo->act_ptr += (urb->transfer_buffer_length - fifo->rx_offset); /* adjust pointer */ -- fill_tx_urb(fifo); /* refill the urb */ -- fifo->hfc->threshold_mask |= fifo->fifo_mask; /* assume threshold reached */ -- if (fifo->buff) -- fifo->hfc->service_request |= fifo->fifo_mask; /* need to restart */ --} /* tx_complete */ - --/***********************************************/ --/* receive completion routine for all rx fifos */ --/***********************************************/ --static void --rx_complete(purb_t urb) -+ // errcode = (usb_submit_urb(fifo->iso[0].purb, GFP_KERNEL)); -+ return(fifo->active); -+} -+ -+/* stops running iso chain and frees their pending urbs */ -+static void stop_isoc_chain(usb_fifo * fifo) - { -- usb_fifo *fifo = (usb_fifo *) urb->context; /* pointer to our fifo */ -- hfcusb_data *hfc = fifo->hfc; -- usb_fifo *txfifo; -- __u8 last_state; -- int i, ii, currcnt, hdlci; -- struct sk_buff *skb; -- -- urb->dev = hfc->dev; /* security init */ -- if ((!fifo->active) || (urb->status)) { -- hfc->service_request &= ~fifo->fifo_mask; /* no further handling */ -- hfc->active_fifos &= ~fifo->fifo_mask; /* we are inactive */ -- fifo->urb.interval = 0; /* cancel automatic rescheduling */ -- if (fifo->buff) { -- dev_kfree_skb_any(fifo->buff); -- fifo->buff = NULL; -+ int i; -+ -+ for(i = 0; i < 2; i++) -+ { -+ if(fifo->iso[i].purb) -+ { -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "HFC-USB: Stopping iso chain for fifo %i.%i\n", fifo->fifonum, i); -+#endif -+ usb_unlink_urb(fifo->iso[i].purb); -+ usb_free_urb(fifo->iso[i].purb); -+ fifo->iso[i].purb = NULL; - } -- return; - } -+ if (fifo->urb) { -+ usb_unlink_urb(fifo->urb); -+ usb_free_urb(fifo->urb); -+ fifo->urb = NULL; -+ } -+ fifo->active = 0; -+} - -- /* first check for any status changes */ -- if ((urb->actual_length < fifo->rx_offset) -- || (urb->actual_length > fifo->usb_maxlen)) -- return; /* error condition */ -- -- if (fifo->rx_offset) { -- hfc->threshold_mask = fifo->buffer[1]; /* update threshold status */ -- fifo->next_complete = fifo->buffer[0] & 1; -- if ((fifo->fifonum == HFCUSB_D_RX) && -- (hfc->led_req != hfc->led_act)) -- queue_control_request(hfc, HFCUSB_P_DATA, hfc->led_req); -- -- /* check if rescheduling needed */ -- if ((i = -- hfc->service_request & hfc->active_fifos & ~hfc-> -- threshold_mask)) { -- currcnt = -- usb_get_current_frame_number(hfc->dev); -- txfifo = hfc->fifos + HFCUSB_B1_TX; -- ii = 3; -- while (ii--) { -- if ((i & txfifo->fifo_mask) -- && (currcnt != txfifo->framenum)) { -- hfc->service_request &= -- ~txfifo->fifo_mask; -- if (!txfifo->buff) -- fill_tx_urb(txfifo); -- if (txfifo->buff) -- usb_submit_urb(&txfifo-> -- urb); -+// defines how much ISO packets are handled in one URB -+static int iso_packets[8]={ISOC_PACKETS_B,ISOC_PACKETS_B,ISOC_PACKETS_B,ISOC_PACKETS_B, -+ ISOC_PACKETS_D,ISOC_PACKETS_D,ISOC_PACKETS_D,ISOC_PACKETS_D}; -+ -+/*****************************************************/ -+/* transmit completion routine for all ISO tx fifos */ -+/*****************************************************/ -+static void tx_iso_complete(struct urb *urb) -+{ -+ iso_urb_struct *context_iso_urb = (iso_urb_struct *) urb->context; -+ usb_fifo *fifo = context_iso_urb->owner_fifo; -+ hfcusb_data *hfc = fifo->hfc; -+ int k, tx_offset, num_isoc_packets, sink, len, current_len,errcode,frame_complete,transp_mode,fifon; -+ __u8 threshbit; -+ __u8 threshtable[8] = { 1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80}; -+ -+ fifon=fifo->fifonum; -+ tx_offset=0; -+ // very weird error code when using ohci drivers, for now : ignore this error ... (MB) -+ if(urb->status == -EOVERFLOW) -+ { -+ urb->status = 0; -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "HFC-USB: ignoring USB DATAOVERRUN for fifo %i \n",fifon); -+#endif -+ } -+ -+ if(fifo->active && !urb->status) -+ { -+ transp_mode=0; -+ if(fifon<4 && hfc->b_mode[fifon/2]==L1_MODE_TRANS) transp_mode=TRUE; -+ -+ threshbit = threshtable[fifon] & hfc->threshold_mask; // is threshold set for our channel? -+ num_isoc_packets=iso_packets[fifon]; -+ -+ if(fifon >= HFCUSB_D_TX) -+ { -+ sink = (threshbit) ? SINK_DMIN : SINK_DMAX; // how much bit go to the sink for D-channel? -+ } -+ else -+ { -+ sink = (threshbit) ? SINK_MIN : SINK_MAX; // how much bit go to the sink for B-channel? -+ } -+ -+ // prepare ISO Urb -+ fill_isoc_urb(urb, fifo->hfc->dev, fifo->pipe,context_iso_urb->buffer, num_isoc_packets, -+ fifo->usb_packet_maxlen, fifo->intervall, tx_iso_complete, urb->context); -+ memset(context_iso_urb->buffer, 0, sizeof(context_iso_urb->buffer)); -+ -+ frame_complete=FALSE; -+ -+ // Generate Iso Packets -+ for(k = 0; k < num_isoc_packets; ++k) -+ { -+ if(fifo->skbuff) -+ { -+ len = fifo->skbuff->len; // remaining length -+ -+ fifo->bit_line -= sink; // we lower data margin every msec -+ current_len = (0 - fifo->bit_line) / 8; -+ if(current_len > 14) current_len = 14; // maximum 15 byte for every ISO packet makes our life easier -+ current_len = (len <= current_len) ? len : current_len; -+ fifo->bit_line += current_len * 8; // how much bit do we put on the line? -+ -+ context_iso_urb->buffer[tx_offset] = 0; -+ if(current_len == len) -+ { -+ if(!transp_mode) -+ { -+ context_iso_urb->buffer[tx_offset] = 1; // here frame completion -+ fifo->bit_line += 32; // add 2 byte flags and 16bit CRC at end of ISDN frame -+ } -+ frame_complete = TRUE; -+ } -+ -+ // copy bytes from buffer into ISO_URB -+ memcpy(context_iso_urb->buffer+tx_offset+1,fifo->skbuff->data,current_len); -+ skb_pull(fifo->skbuff,current_len); -+ -+ // define packet delimeters within the URB buffer -+ urb->iso_frame_desc[k].offset = tx_offset; -+ urb->iso_frame_desc[k].length = current_len + 1; -+ -+ tx_offset += (current_len + 1); -+ // printk(KERN_INFO "HFC-USB: fifonum:%d,%d bytes to send, %d bytes ISO packet,bitline:%d,sink:%d,threshbit:%d,threshmask:%x\n",fifon,len,current_len,fifo->bit_line,sink,threshbit,hfc->threshold_mask); -+ if(!transp_mode) -+ { -+ if(fifon==HFCUSB_B1_TX) handle_led(hfc,LED_B1_DATA); -+ if(fifon==HFCUSB_B2_TX) handle_led(hfc,LED_B2_DATA); -+ } -+ } -+ else -+ { -+ // we have no more data - generate 1 byte ISO packets -+ urb->iso_frame_desc[k].offset = tx_offset++; -+ -+ urb->iso_frame_desc[k].length = 1; -+ fifo->bit_line -= sink; // we lower data margin every msec -+ -+ if(fifo->bit_line < BITLINE_INF) -+ { -+ fifo->bit_line = BITLINE_INF; -+ //printk (KERN_INFO "HFC-USB: BITLINE_INF underrun\n"); - } -- txfifo += 2; - } -- } - -- /* handle l1 events */ -- if ((fifo->buffer[0] >> 4) != hfc->l1_state) { -- last_state = hfc->l1_state; -- hfc->l1_state = fifo->buffer[0] >> 4; /* update status */ -- if (timer_pending(&hfc->t4_timer)) -- del_timer(&hfc->t4_timer); -- if (((hfc->l1_state == 3) && -- ((last_state == 7) || -- (last_state == 8))) || -- ((timer_pending(&hfc->t3_timer) && -- (hfc->l1_state == 8)))) { -- hfc->t4_timer.expires = jiffies + 2; -- add_timer(&hfc->t4_timer); -- } else { -- if (timer_pending(&hfc->t3_timer) -- && (hfc->l1_state == 7)) -- del_timer(&hfc->t3_timer); /* no longer needed */ -- test_and_set_bit(HFCUSB_L1_STATECHANGE, -- &hfc->l1_event); -- queue_task(&hfc->l1_tq, &tq_immediate); -- mark_bh(IMMEDIATE_BH); -+ if(frame_complete) -+ { -+ // delete the buffer only once, here or in hfc_usb_l2l1() in a PH_DATA|REQUEST -+ fifo->delete_flg=TRUE; -+ -+ fifo->hif->l1l2(fifo->hif,PH_DATA|CONFIRM,(void*)fifo->skbuff->truesize); -+ -+ if(fifo->skbuff && fifo->delete_flg) -+ { -+ dev_kfree_skb_any(fifo->skbuff); -+ //printk(KERN_INFO "HFC-USB: skbuff=NULL on fifo:%d\n",fifo->fifonum); -+ fifo->skbuff = NULL; -+ fifo->delete_flg=FALSE; -+ } -+ -+ frame_complete=FALSE; - } -+ } -+ -+ errcode = usb_submit_urb(urb); -+ if(errcode < 0) -+ { -+ printk(KERN_INFO "HFC-USB: error submitting ISO URB: %i \n", errcode); -+ } -+ } -+ else -+ { -+ if(urb->status) -+ { -+ printk(KERN_INFO "HFC-USB: tx_iso_complete : urb->status %i, fifonum %i\n", urb->status,fifon); - } - } - -- /* check the length for data and move if present */ -- if (fifo->next_complete || (urb->actual_length > fifo->rx_offset)) { -- i = fifo->buff->len + urb->actual_length - fifo->rx_offset; /* new total length */ -- hdlci = (fifo->transmode) ? 0 : 3; -- if (i <= (fifo->max_size + hdlci)) { -- memcpy(fifo->act_ptr, -- fifo->buffer + fifo->rx_offset, -- urb->actual_length - fifo->rx_offset); -- fifo->act_ptr += -- (urb->actual_length - fifo->rx_offset); -- fifo->buff->len += -- (urb->actual_length - fifo->rx_offset); -- } else -- fifo->buff->len = fifo->max_size + 4; /* mark frame as to long */ -- if (fifo->next_complete && (urb->actual_length < fifo->usb_maxlen)) { -- /* the frame is complete */ -- fifo->next_complete = 0; -- if (((!*(fifo->act_ptr - 1)) || fifo->transmode) && -- (fifo->buff->len >= (hdlci + 1)) -- && (fifo->buff->len <= -- (fifo->max_size + hdlci)) && -- ((skb = dev_alloc_skb(fifo->max_size + hdlci)) != NULL)) { -- fifo->buff->len -= hdlci; /* adjust size */ -- switch (fifo->fifonum) { -- case HFCUSB_D_RX: -- skb_queue_tail(hfc->regd. -- drq, -- fifo->buff); -- test_and_set_bit -- (HFCUSB_L1_DRX, -- &hfc->l1_event); -- queue_task(&hfc->l1_tq, -- &tq_immediate); -- mark_bh(IMMEDIATE_BH); -- break; -+} /* tx_iso_complete */ - -- case HFCUSB_B1_RX: -- if (hfc->regd.brq[0]) { -- skb_queue_tail -- (hfc->regd. -- brq[0], -- fifo->buff); -- hfc->regd. -- bch_l1l2(hfc-> -- regd. -- arg_hisax, -- 0, -- PH_DATA -- | -- INDICATION, -- (void *) -- fifo-> -- buff); -- } else -- dev_kfree_skb_any -- (fifo->buff); -- break; -- -- case HFCUSB_B2_RX: -- if (hfc->regd.brq[1]) { -- skb_queue_tail -- (hfc->regd. -- brq[1], -- fifo->buff); -- hfc->regd. -- bch_l1l2(hfc-> -- regd. -- arg_hisax, -- 1, -- PH_DATA -- | -- INDICATION, -- (void -- *) -- fifo-> -- buff); -- } else -- dev_kfree_skb_any -- (fifo->buff); -- break; -+/*****************************************************/ -+/* receive completion routine for all ISO tx fifos */ -+/*****************************************************/ -+static void rx_iso_complete(struct urb *urb) -+{ -+ iso_urb_struct *context_iso_urb = (iso_urb_struct *) urb->context; -+ usb_fifo *fifo = context_iso_urb->owner_fifo; -+ hfcusb_data *hfc = fifo->hfc; -+ int k, len, errcode, offset, num_isoc_packets,fifon; -+ __u8 *buf; - -- case HFCUSB_PCM_RX: -- skb_queue_tail(&hfc->regd. -- erq, -- fifo->buff); -- test_and_set_bit -- (HFCUSB_L1_ERX, -- &hfc->l1_event); -- queue_task(&hfc->l1_tq, -- &tq_immediate); -- mark_bh(IMMEDIATE_BH); -- break; -+ fifon=fifo->fifonum; -+ // very weird error code when using ohci drivers, for now : ignore this error ... (MB) -+ if(urb->status == -EOVERFLOW) -+ { -+ urb->status = 0; -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "HFC-USB: ignoring USB DATAOVERRUN for fifo %i \n",fifon); -+#endif -+ } - -- default: -- dev_kfree_skb_any(fifo-> -- buff); -- break; -+ if(fifo->active && !urb->status) -+ { -+ num_isoc_packets=iso_packets[fifon]; -+ -+ // Generate D-Channel Iso Packets -+ for(k = 0; k < num_isoc_packets; ++k) -+ { -+ len=urb->iso_frame_desc[k].actual_length; -+ offset=urb->iso_frame_desc[k].offset; -+ buf=context_iso_urb->buffer+offset; -+ -+ if(fifo->last_urblen!=fifo->usb_packet_maxlen) -+ { -+ // the threshold mask is in the 2nd status byte -+ hfc->threshold_mask=buf[1]; -+ // the S0 state is in the upper half of the 1st status byte -+ state_handler(hfc,buf[0] >> 4); -+ // if we have more than the 2 status bytes -> collect data -+ if(len>2) collect_rx_frame(fifo,buf+2,len-2,buf[0]&1); - } -- fifo->buff = skb; -- } -- fifo->buff->len = 0; /* reset counter */ -- fifo->act_ptr = fifo->buff->data; /* and pointer */ -+ else collect_rx_frame(fifo,buf,len,0); -+ -+ fifo->last_urblen=len; -+ -+ } -+ -+ // prepare ISO Urb -+ fill_isoc_urb(urb, fifo->hfc->dev, fifo->pipe,context_iso_urb->buffer, num_isoc_packets, -+ fifo->usb_packet_maxlen, fifo->intervall, rx_iso_complete, urb->context); -+ -+ errcode = usb_submit_urb(urb); -+ if(errcode < 0) -+ { -+ printk(KERN_INFO "HFC-USB: error submitting ISO URB: %i \n", errcode); -+ } -+ } -+ else -+ { -+ if(urb->status) -+ { -+ printk(KERN_INFO "HFC-USB: rx_iso_complete : urb->status %i, fifonum %i\n", urb->status,fifon); -+ } -+ } -+} /* rx_iso_complete */ -+ -+ -+/*****************************************************/ -+/* collect data from interrupt or isochron in */ -+/*****************************************************/ -+static void collect_rx_frame(usb_fifo *fifo,__u8 *data,int len,int finish) -+{ -+ hfcusb_data *hfc = fifo->hfc; -+ int transp_mode,fifon; -+ -+ fifon=fifo->fifonum; -+ transp_mode=0; -+ if(fifon<4 && hfc->b_mode[fifon/2]==L1_MODE_TRANS) transp_mode=TRUE; -+ -+ //printk(KERN_INFO "HFC-USB: got %d bytes finish:%d max_size:%d fifo:%d\n",len,finish,fifo->max_size,fifon); -+ if(!fifo->skbuff) -+ { -+ // allocate sk buffer -+ fifo->skbuff=dev_alloc_skb(fifo->max_size + 3); -+ if(!fifo->skbuff) -+ { -+ printk(KERN_INFO "HFC-USB: cannot allocate buffer (dev_alloc_skb) fifo:%d\n",fifon); -+ return; -+ } -+ -+ } -+ -+ if(len && fifo->skbuff->len+lenmax_size) -+ { -+ memcpy(skb_put(fifo->skbuff,len),data,len); -+ } -+ else printk(KERN_INFO "HCF-USB: got frame exceeded fifo->max_size:%d\n",fifo->max_size); -+ -+ // give transparent data up, when 128 byte are available -+ if(transp_mode && fifo->skbuff->len>=128) -+ { -+ fifo->hif->l1l2(fifo->hif,PH_DATA | INDICATION,fifo->skbuff); -+ fifo->skbuff = NULL; // buffer was freed from upper layer -+ return; -+ } -+ -+ // we have a complete hdlc packet -+ if(finish) -+ { -+ if(!fifo->skbuff->data[fifo->skbuff->len-1]) -+ { -+ skb_trim(fifo->skbuff,fifo->skbuff->len-3); // remove CRC & status -+ -+ //printk(KERN_INFO "HFC-USB: got frame %d bytes on fifo:%d\n",fifo->skbuff->len,fifon); -+ -+ if(fifon==HFCUSB_PCM_RX) fifo->hif->l1l2(fifo->hif,PH_DATA_E | INDICATION,fifo->skbuff); -+ else fifo->hif->l1l2(fifo->hif,PH_DATA | INDICATION,fifo->skbuff); -+ -+ fifo->skbuff = NULL; // buffer was freed from upper layer -+ } -+ else -+ { -+ printk(KERN_INFO "HFC-USB: got frame %d bytes but CRC ERROR!!!\n",fifo->skbuff->len); -+ -+ skb_trim(fifo->skbuff,0); // clear whole buffer -+ } -+ } -+ -+ // LED flashing only in HDLC mode -+ if(!transp_mode) -+ { -+ if(fifon==HFCUSB_B1_RX) handle_led(hfc,LED_B1_DATA); -+ if(fifon==HFCUSB_B2_RX) handle_led(hfc,LED_B2_DATA); -+ } -+} -+ -+/***********************************************/ -+/* receive completion routine for all rx fifos */ -+/***********************************************/ -+static void rx_complete(struct urb *urb) -+{ -+ int len; -+ __u8 *buf; -+ usb_fifo *fifo = (usb_fifo *) urb->context; /* pointer to our fifo */ -+ hfcusb_data *hfc = fifo->hfc; -+ -+ urb->dev = hfc->dev; /* security init */ -+ -+ if((!fifo->active) || (urb->status)) { -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "HFC-USB: RX-Fifo %i is going down (%i)\n", fifo->fifonum, urb->status); -+#endif -+ fifo->urb->interval = 0; /* cancel automatic rescheduling */ -+ if(fifo->skbuff) { -+ dev_kfree_skb_any(fifo->skbuff); -+ fifo->skbuff = NULL; - } -+ return; - } -- fifo->rx_offset = (urb->actual_length < fifo->usb_maxlen) ? 2 : 0; --} /* rx_complete */ -+ -+ len=urb->actual_length; -+ buf=fifo->buffer; -+ -+ if(fifo->last_urblen!=fifo->usb_packet_maxlen) { -+ // the threshold mask is in the 2nd status byte -+ hfc->threshold_mask=buf[1]; -+ // the S0 state is in the upper half of the 1st status byte -+ state_handler(hfc,buf[0] >> 4); -+ // if we have more than the 2 status bytes -> collect data -+ if(len>2) collect_rx_frame(fifo,buf+2,urb->actual_length-2,buf[0]&1); -+ } else -+ collect_rx_frame(fifo,buf,urb->actual_length,0); -+ -+ fifo->last_urblen=urb->actual_length; -+ -+ -+} /* rx_complete */ -+ -+ - - /***************************************************/ - /* start the interrupt transfer for the given fifo */ - /***************************************************/ --static void --start_rx_fifo(usb_fifo * fifo) -+static void start_int_fifo(usb_fifo * fifo) - { -- if (fifo->buff) -- return; /* still active */ -- if (! -- (fifo->buff = -- dev_alloc_skb(fifo->max_size + (fifo->transmode ? 0 : 3)))) -- return; -- fifo->act_ptr = fifo->buff->data; -- FILL_INT_URB(&fifo->urb, fifo->hfc->dev, fifo->pipe, fifo->buffer, -- fifo->usb_maxlen, rx_complete, fifo, fifo->intervall); -- fifo->next_complete = 0; -- fifo->rx_offset = 2; -- fifo->active = 1; /* must be marked active */ -- fifo->hfc->active_fifos |= fifo->fifo_mask; -- if (usb_submit_urb(&fifo->urb)) { -+ int errcode; -+ -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "HFC-USB: starting intr IN fifo:%d\n", fifo->fifonum); -+#endif -+ if (!fifo->urb) { -+ fifo->urb = usb_alloc_urb(0); -+ if (!fifo->urb) -+ return; -+ } -+ usb_fill_int_urb(fifo->urb, fifo->hfc->dev, fifo->pipe, fifo->buffer, -+ fifo->usb_packet_maxlen, rx_complete, fifo, fifo->intervall); -+ fifo->active = 1; /* must be marked active */ -+ errcode = usb_submit_urb(fifo->urb); -+ -+ if(errcode) -+ { -+ printk(KERN_INFO "HFC-USB: submit URB error(start_int_info): status:%i\n", errcode); - fifo->active = 0; -- fifo->hfc->active_fifos &= ~fifo->fifo_mask; -- dev_kfree_skb_any(fifo->buff); -- fifo->buff = NULL; -+ fifo->skbuff = NULL; - } --} /* start_rx_fifo */ -+} /* start_int_fifo */ - --/***************************************************************/ --/* control completion routine handling background control cmds */ --/***************************************************************/ --static void --ctrl_complete(purb_t urb) -+/*****************************/ -+/* set the B-channel mode */ -+/*****************************/ -+static void set_hfcmode(hfcusb_data *hfc,int channel,int mode) - { -- hfcusb_data *hfc = (hfcusb_data *) urb->context; -+ __u8 val,idx_table[2]={0,2}; - -- urb->dev = hfc->dev; -- if (hfc->ctrl_cnt) { -- switch (hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg) { -- case HFCUSB_FIFO: -- hfc->ctrl_fifo = -- hfc->ctrl_buff[hfc->ctrl_out_idx]. -- reg_val; -- break; -- case HFCUSB_F_USAGE: -- if (!hfc->dfifo_fill) { -- fill_tx_urb(hfc->fifos + -- HFCUSB_D_TX); -- if (hfc->fifos[HFCUSB_D_TX].buff) -- usb_submit_urb(&hfc-> -- fifos -- [HFCUSB_D_TX]. -- urb); -- } else { -- queue_control_request(hfc, -- HFCUSB_FIFO, -- HFCUSB_D_TX); -- queue_control_request(hfc, -- HFCUSB_F_USAGE, -- 0); -- } -- break; -- case HFCUSB_SCTRL_R: -- switch (hfc->ctrl_fifo) { -- case HFCUSB_B1_RX: -- if (hfc->bch_enables & 1) -- start_rx_fifo(hfc-> -- fifos -- + -- HFCUSB_B1_RX); -- break; -- case HFCUSB_B2_RX: -- if (hfc->bch_enables & 2) -- start_rx_fifo(hfc-> -- fifos -- + -- HFCUSB_B2_RX); -- break; -- } -- if (hfc->bch_enables & 3) -- hfc->led_req |= LED_BCH; -- else -- hfc->led_req &= ~LED_BCH; -- break; -- case HFCUSB_P_DATA: -- hfc->led_act = -- hfc->ctrl_buff[hfc->ctrl_out_idx]. -- reg_val; -- break; -- } -- hfc->ctrl_cnt--; /* decrement actual count */ -- if (++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE) -- hfc->ctrl_out_idx = 0; /* pointer wrap */ -- ctrl_start_transfer(hfc); /* start next transfer */ -+#ifdef VERBOSE_ISDN_DEBUG -+ printk (KERN_INFO "HFC-USB: setting channel %d to mode %d\n",channel,mode); -+#endif -+ -+ hfc->b_mode[channel]=mode; -+ -+ // setup CON_HDLC -+ val=0; -+ if(mode!=L1_MODE_NULL) val=8; // enable fifo? -+ if(mode==L1_MODE_TRANS) val|=2; // set transparent bit -+ -+ queue_control_request(hfc,HFCUSB_FIFO,idx_table[channel],1); // set FIFO to transmit register -+ queue_control_request(hfc,HFCUSB_CON_HDLC,val,1); -+ queue_control_request(hfc,HFCUSB_INC_RES_F,2,1); // reset fifo -+ -+ queue_control_request(hfc,HFCUSB_FIFO,idx_table[channel]+1,1); // set FIFO to receive register -+ queue_control_request(hfc,HFCUSB_CON_HDLC,val,1); -+ queue_control_request(hfc,HFCUSB_INC_RES_F,2,1); // reset fifo -+ -+ val=0x40; -+ if(hfc->b_mode[0]) val|=1; -+ if(hfc->b_mode[1]) val|=2; -+ queue_control_request(hfc,HFCUSB_SCTRL,val,1); -+ -+ val=0; -+ if(hfc->b_mode[0]) val|=1; -+ if(hfc->b_mode[1]) val|=2; -+ queue_control_request(hfc,HFCUSB_SCTRL_R,val,1); -+ -+ if(mode==L1_MODE_NULL) -+ { -+ if(channel) handle_led(hfc,LED_B2_OFF); -+ else handle_led(hfc,LED_B1_OFF); - } --} /* ctrl_complete */ -+ else -+ { -+ if(channel) handle_led(hfc,LED_B2_ON); -+ else handle_led(hfc,LED_B1_ON); -+ } -+} - --/*****************************************/ --/* Layer 1 + D channel access from HiSax */ --/*****************************************/ --static void --hfcusb_l1_access(void *drvarg, int pr, void *arg) --{ -- hfcusb_data *hfc = (hfcusb_data *) drvarg; -- -- switch (pr) { -- case (PH_DATA | REQUEST): -- case (PH_PULL | INDICATION): -- skb_queue_tail(hfc->regd.dsq, -- (struct sk_buff *) arg); -- if (!hfc->fifos[HFCUSB_D_TX].active -- && !hfc->dfifo_fill) { -- fill_tx_urb(hfc->fifos + HFCUSB_D_TX); -- hfc->active_fifos |= -- hfc->fifos[HFCUSB_D_TX].fifo_mask; -- usb_submit_urb(&hfc->fifos[HFCUSB_D_TX]. -- urb); -- } -- break; -- case (PH_ACTIVATE | REQUEST): -- switch (hfc->l1_state) { -- case 6: -- case 8: -- hfc->regd.dch_l1l2(hfc->regd.arg_hisax, -- (PH_DEACTIVATE | -- INDICATION), NULL); -+/* -+ -------------------------------------------------------------------------------------- -+ from here : hisax_if callback routines : -+ - void hfc_usb_d_l2l1(struct hisax_if *hisax_d_if, int pr, void *arg) { - -- break; -- case 7: -- hfc->regd.dch_l1l2(hfc->regd.arg_hisax, -- (PH_ACTIVATE | -- INDICATION), NULL); -+ l1 to l2 routines : -+ - static void hfc_usb_l1l2(hfcusb_data * hfc) - -- break; -- default: -- queue_control_request(hfc, HFCUSB_STATES, 0x60); /* start activation */ -- hfc->t3_timer.expires = -- jiffies + (HFC_TIMER_T3 * HZ) / 1000; -- if (!timer_pending(&hfc->t3_timer)) -- add_timer(&hfc->t3_timer); -- break; -- } -- break; -+*/ - -- case (PH_DEACTIVATE | REQUEST): -- queue_control_request(hfc, HFCUSB_STATES, 0x40); /* start deactivation */ -- break; -- default: -- printk(KERN_INFO "unknown hfcusb l1_access 0x%x\n", -- pr); -- break; -- } --} /* hfcusb_l1_access */ -- --/*******************************/ --/* B channel access from HiSax */ --/*******************************/ --static void --hfcusb_bch_access(void *drvarg, int chan, int pr, void *arg) --{ -- hfcusb_data *hfc = (hfcusb_data *) drvarg; -- usb_fifo *fifo = hfc->fifos + (chan ? HFCUSB_B2_TX : HFCUSB_B1_TX); -- long flags; -- -- switch (pr) { -- case (PH_DATA | REQUEST): -- case (PH_PULL | INDICATION): -- save_flags(flags); -- cli(); -- if (!fifo->active) { -- fill_tx_urb(fifo); -- hfc->active_fifos |= fifo->fifo_mask; -- usb_submit_urb(&fifo->urb); -- } -- restore_flags(flags); -- break; -- case (PH_ACTIVATE | REQUEST): -- if (!((int) arg)) { -- hfc->bch_enables &= ~(1 << chan); -- if (fifo->active) { -- fifo->active = 0; -- usb_unlink_urb(&fifo->urb); -+void hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg) -+{ -+ usb_fifo *fifo = my_hisax_if->priv; -+ hfcusb_data *hfc = fifo->hfc; -+ -+ switch (pr) { -+ case PH_ACTIVATE | REQUEST: -+ if(fifo->fifonum==HFCUSB_D_TX) -+ { -+#ifdef VERBOSE_ISDN_DEBUG -+ printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_ACTIVATE | REQUEST\n"); -+#endif -+ queue_control_request(hfc, HFCUSB_STATES,0x60,1); /* make activation */ -+ hfc->t3_timer.expires = jiffies + (HFC_TIMER_T3 * HZ) / 1000; -+ if(!timer_pending(&hfc->t3_timer)) add_timer(&hfc->t3_timer); - } -- save_flags(flags); -- cli(); -- queue_control_request(hfc, HFCUSB_FIFO, -- fifo->fifonum); -- queue_control_request(hfc, -- HFCUSB_INC_RES_F, 2); -- queue_control_request(hfc, HFCUSB_CON_HDLC, -- 9); -- queue_control_request(hfc, HFCUSB_SCTRL, -- 0x40 + -- hfc->bch_enables); -- queue_control_request(hfc, HFCUSB_SCTRL_R, -- hfc->bch_enables); -- restore_flags(flags); -- fifo++; -- if (fifo->active) { -- fifo->active = 0; -- usb_unlink_urb(&fifo->urb); -+ else -+ { -+#ifdef VERBOSE_ISDN_DEBUG -+ printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_ACTIVATE | REQUEST\n"); -+#endif -+ set_hfcmode(hfc,(fifo->fifonum==HFCUSB_B1_TX) ? 0 : 1 ,(int)arg); -+ fifo->hif->l1l2(fifo->hif,PH_ACTIVATE | INDICATION, NULL); - } -- return; /* fifo deactivated */ -- } -- fifo->transmode = ((int) arg == L1_MODE_TRANS); -- fifo->max_size = -- ((fifo->transmode) ? fifo-> -- usb_maxlen : MAX_BCH_SIZE); -- (fifo + 1)->transmode = fifo->transmode; -- (fifo + 1)->max_size = fifo->max_size; -- hfc->bch_enables |= (1 << chan); -- save_flags(flags); -- cli(); -- queue_control_request(hfc, HFCUSB_FIFO, -- fifo->fifonum); -- queue_control_request(hfc, HFCUSB_CON_HDLC, -- ((!fifo-> -- transmode) ? 9 : 11)); -- queue_control_request(hfc, HFCUSB_INC_RES_F, 2); -- queue_control_request(hfc, HFCUSB_SCTRL, -- 0x40 + hfc->bch_enables); -- if ((int) arg == L1_MODE_HDLC) -- queue_control_request(hfc, HFCUSB_CON_HDLC, -- 8); -- queue_control_request(hfc, HFCUSB_FIFO, -- fifo->fifonum + 1); -- queue_control_request(hfc, HFCUSB_CON_HDLC, -- ((!fifo-> -- transmode) ? 8 : 10)); -- queue_control_request(hfc, HFCUSB_INC_RES_F, 2); -- queue_control_request(hfc, HFCUSB_SCTRL_R, -- hfc->bch_enables); -- restore_flags(flags); -- -- break; -- -- default: -- printk(KERN_INFO -- "unknown hfcusb bch_access chan %d 0x%x\n", -- chan, pr); -- break; -- } --} /* hfcusb_bch_access */ -+ break; -+ case PH_DEACTIVATE | REQUEST: -+ if(fifo->fifonum==HFCUSB_D_TX) -+ { -+#ifdef VERBOSE_ISDN_DEBUG -+ printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_DEACTIVATE | REQUEST\n"); -+#endif -+ printk (KERN_INFO "HFC-USB: ISDN TE device should not deativate...\n"); -+ } -+ else -+ { -+#ifdef VERBOSE_ISDN_DEBUG -+ printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_DEACTIVATE | REQUEST\n"); -+#endif -+ set_hfcmode(hfc,(fifo->fifonum==HFCUSB_B1_TX) ? 0 : 1 ,(int)L1_MODE_NULL); -+ fifo->hif->l1l2(fifo->hif,PH_DEACTIVATE | INDICATION, NULL); -+ } -+ break; -+ case PH_DATA | REQUEST: -+ if(fifo->skbuff && fifo->delete_flg) -+ { -+ dev_kfree_skb_any(fifo->skbuff); -+ //printk(KERN_INFO "skbuff=NULL on fifo:%d\n",fifo->fifonum); -+ fifo->skbuff = NULL; -+ fifo->delete_flg=FALSE; -+ } -+ -+ fifo->skbuff=arg; // we have a new buffer -+ -+ //if(fifo->fifonum==HFCUSB_D_TX) printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_DATA | REQUEST\n"); -+ //else printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_DATA | REQUEST\n"); -+ break; -+ default: -+ printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x\n", pr); -+ break; -+ } -+} -+ -+// valid configurations -+#define CNF_4INT3ISO 1 // 4 INT IN, 3 ISO OUT -+#define CNF_3INT3ISO 2 // 3 INT IN, 3 ISO OUT -+#define CNF_4ISO3ISO 3 // 4 ISO IN, 3 ISO OUT -+#define CNF_3ISO3ISO 4 // 3 ISO IN, 3 ISO OUT -+ -+ -+/* -+ -------------------------------------------------------------------------------------- -+ From here on USB initialization and deactivation related routines are implemented : -+ -+ - hfc_usb_init : -+ is the main Entry Point for the USB Subsystem when the device get plugged -+ in. This function calls usb_register with usb_driver as parameter. -+ Here, further entry points for probing (hfc_usb_probe) and disconnecting -+ the device (hfc_usb_disconnect) are published, as the id_table -+ -+ - hfc_usb_probe -+ this function is called by the usb subsystem, and steps through the alternate -+ settings of the currently plugged in device to detect all Endpoints needed to -+ run an ISDN TA. -+ Needed EndPoints are -+ 3 (+1) IntIn EndPoints (D-in, E-in, B1-in, B2-in, (E-in)) or -+ 3 (+1) Isochron In Endpoints (D-out, B1-out, B2-out) and 3 IsoOut Endpoints -+ The currently used transfer mode of on the Out-Endpoints will be stored in -+ hfc->usb_transfer_mode and is either USB_INT or USB_ISO -+ When a valid alternate setting could be found, the usb_init (see blow) -+ function is called -+ -+ - usb_init -+ Here, the HFC_USB Chip itself gets initialized and the USB framework to send/receive -+ Data to/from the several EndPoints are initialized: -+ The E- and D-Channel Int-In chain gets started -+ The IsoChain for the Iso-Out traffic get started -+ -+ - hfc_usb_disconnect -+ this function is called by the usb subsystem and has to free all resources -+ and stop all usb traffic to allow a proper hotplugging disconnect. -+ -+*/ - - /***************************************************************************/ - /* usb_init is called once when a new matching device is detected to setup */ --/* main parmeters. It registers the driver at the main hisax module. */ -+/* main parameters. It registers the driver at the main hisax module. */ - /* on success 0 is returned. */ - /***************************************************************************/ --static int --usb_init(hfcusb_data * hfc) -+static int usb_init(hfcusb_data * hfc) - { - usb_fifo *fifo; -- int i; -+ int i, err; - u_char b; -- -+ struct hisax_b_if *p_b_if[2]; -+ - /* check the chip id */ -- if ((Read_hfc(hfc, HFCUSB_CHIP_ID, &b) != 1) || -- (b != HFCUSB_CHIPID)) { -+ printk(KERN_INFO "HFCUSB_CHIP_ID begin\n"); -+ if (read_usb(hfc, HFCUSB_CHIP_ID, &b) != 1) { -+ printk(KERN_INFO "HFC-USB: cannot read chip id\n"); -+ return(1); -+ } -+ printk(KERN_INFO "HFCUSB_CHIP_ID %x\n", b); -+ if (b != HFCUSB_CHIPID) { - printk(KERN_INFO "HFC-USB: Invalid chip id 0x%02x\n", b); -- return (1); -+ return(1); - } - - /* first set the needed config, interface and alternate */ -- usb_set_configuration(hfc->dev, 1); -- usb_set_interface(hfc->dev, hfc->if_used, hfc->alt_used); -+ printk(KERN_INFO "usb_init 1\n"); -+// usb_set_configuration(hfc->dev, 1); -+ printk(KERN_INFO "usb_init 2\n"); -+ err = usb_set_interface(hfc->dev, hfc->if_used, hfc->alt_used); -+ printk(KERN_INFO "usb_init usb_set_interface return %d\n", err); -+ /* now we initialize the chip */ -+ write_usb(hfc, HFCUSB_CIRM, 8); // do reset -+ write_usb(hfc, HFCUSB_CIRM, 0x10); // aux = output, reset off - -- /* init the led state request */ -- hfc->led_req = LED_DRIVER; -+ // set USB_SIZE to match the the wMaxPacketSize for INT or BULK transfers -+ write_usb(hfc, HFCUSB_USB_SIZE,(hfc->packet_size/8) | ((hfc->packet_size/8) << 4)); - -- /* now we initialise the chip */ -- Write_hfc(hfc, HFCUSB_CIRM, 0x10); /* aux = output, reset off */ -- Write_hfc(hfc, HFCUSB_P_DATA, 0); /* leds = off */ -- Write_hfc(hfc, HFCUSB_USB_SIZE, -- (hfc->fifos[HFCUSB_B1_TX].usb_maxlen >> 3) | -- ((hfc->fifos[HFCUSB_B1_RX].usb_maxlen >> 3) << 4)); -+ // set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers -+ write_usb(hfc, HFCUSB_USB_SIZE_I, hfc->iso_packet_size); - - /* enable PCM/GCI master mode */ -- Write_hfc(hfc, HFCUSB_MST_MODE1, 0); /* set default values */ -- Write_hfc(hfc, HFCUSB_MST_MODE0, 1); /* enable master mode */ -+ write_usb(hfc, HFCUSB_MST_MODE1, 0); /* set default values */ -+ write_usb(hfc, HFCUSB_MST_MODE0, 1); /* enable master mode */ - - /* init the fifos */ -- Write_hfc(hfc, HFCUSB_F_THRES, (HFCUSB_TX_THRESHOLD >> 3) | -- ((HFCUSB_RX_THRESHOLD >> 3) << 4)); -+ write_usb(hfc, HFCUSB_F_THRES, (HFCUSB_TX_THRESHOLD/8) |((HFCUSB_RX_THRESHOLD/8) << 4)); - -- for (i = 0, fifo = hfc->fifos + i; i < HFCUSB_NUM_FIFOS; -- i++, fifo++) { -- Write_hfc(hfc, HFCUSB_FIFO, i); /* select the desired fifo */ -- -- fifo->transmode = 0; /* hdlc mode selected */ -- fifo->buff = NULL; /* init buffer pointer */ -- fifo->max_size = -- (i <= HFCUSB_B2_RX) ? MAX_BCH_SIZE : MAX_DFRAME_LEN; -- Write_hfc(hfc, HFCUSB_HDLC_PAR, ((i <= HFCUSB_B2_RX) ? 0 : 2)); /* data length */ -- Write_hfc(hfc, HFCUSB_CON_HDLC, ((i & 1) ? 0x08 : 0x09)); /* rx hdlc, tx fill 1 */ -- Write_hfc(hfc, HFCUSB_INC_RES_F, 2); /* reset the fifo */ -- } -- -- Write_hfc(hfc, HFCUSB_CLKDEL, 0x0f); /* clock delay value */ -- Write_hfc(hfc, HFCUSB_STATES, 3 | 0x10); /* set deactivated mode */ -- Write_hfc(hfc, HFCUSB_STATES, 3); /* enable state machine */ -+ fifo = hfc->fifos; -+ for(i = 0; i < HFCUSB_NUM_FIFOS; i++) -+ { -+ write_usb(hfc, HFCUSB_FIFO, i); /* select the desired fifo */ -+ fifo[i].skbuff = NULL; /* init buffer pointer */ -+ fifo[i].max_size = (i <= HFCUSB_B2_RX) ? MAX_BCH_SIZE : MAX_DFRAME_LEN; -+ fifo[i].last_urblen=0; -+ write_usb(hfc, HFCUSB_HDLC_PAR, ((i <= HFCUSB_B2_RX) ? 0 : 2)); // set 2 bit for D- & E-channel -+ write_usb(hfc, HFCUSB_CON_HDLC, ((i==HFCUSB_D_TX) ? 0x09 : 0x08)); // rx hdlc, enable IFF for D-channel -+ write_usb(hfc, HFCUSB_INC_RES_F, 2); /* reset the fifo */ -+ } - -- Write_hfc(hfc, HFCUSB_SCTRL_R, 0); /* disable both B receivers */ -- Write_hfc(hfc, HFCUSB_SCTRL, 0x40); /* disable B transmitters + cap mode */ -+ write_usb(hfc, HFCUSB_CLKDEL, 0x0f); /* clock delay value */ -+ write_usb(hfc, HFCUSB_STATES, 3 | 0x10); /* set deactivated mode */ -+ write_usb(hfc, HFCUSB_STATES, 3); /* enable state machine */ -+ -+ write_usb(hfc, HFCUSB_SCTRL_R, 0); /* disable both B receivers */ -+ write_usb(hfc, HFCUSB_SCTRL, 0x40); /* disable B transmitters + capacitive mode */ -+ -+ // set both B-channel to not connected -+ hfc->b_mode[0]=L1_MODE_NULL; -+ hfc->b_mode[1]=L1_MODE_NULL; -+ -+ hfc->l1_activated=FALSE; -+ hfc->led_state=0; -+ hfc->led_new_data=0; - -- /* init the l1 timer */ -+ /* init the t3 timer */ - init_timer(&hfc->t3_timer); - hfc->t3_timer.data = (long) hfc; -- hfc->t3_timer.function = (void *) l1_timer_expire; -+ hfc->t3_timer.function = (void *) l1_timer_expire_t3; -+ /* init the t4 timer */ -+ init_timer(&hfc->t4_timer); - hfc->t4_timer.data = (long) hfc; -- hfc->t4_timer.function = (void *) l1_timer_expire; -- hfc->l1_tq.routine = (void *) (void *) usb_l1d_bh; -- hfc->l1_tq.sync = 0; -- hfc->l1_tq.data = hfc; -- -- /* init the background control machinery */ -- hfc->ctrl_read.requesttype = 0xc0; -- hfc->ctrl_read.request = 1; -- hfc->ctrl_read.length = 1; -- hfc->ctrl_write.requesttype = 0x40; -- hfc->ctrl_write.request = 0; -- hfc->ctrl_write.length = 0; -- FILL_CONTROL_URB(&hfc->ctrl_urb, hfc->dev, hfc->ctrl_out_pipe, -- (u_char *) & hfc->ctrl_write, NULL, 0, -- ctrl_complete, hfc); -- -- /* init the TX-urbs */ -- fifo = hfc->fifos + HFCUSB_D_TX; -- FILL_BULK_URB(&fifo->urb, hfc->dev, fifo->pipe, -- (u_char *) fifo->buffer, 0, tx_complete, fifo); -- fifo = hfc->fifos + HFCUSB_B1_TX; -- FILL_BULK_URB(&fifo->urb, hfc->dev, fifo->pipe, -- (u_char *) fifo->buffer, 0, tx_complete, fifo); -- fifo = hfc->fifos + HFCUSB_B2_TX; -- FILL_BULK_URB(&fifo->urb, hfc->dev, fifo->pipe, -- (u_char *) fifo->buffer, 0, tx_complete, fifo); -- -- /* init the E-buffer */ -- skb_queue_head_init(&hfc->regd.erq); -- -- /* now register ourself at hisax */ -- hfc->regd.version = HISAX_LOAD_VERSION; /* set our version */ -- hfc->regd.cmd = HISAX_LOAD_REGISTER; /* register command */ -- hfc->regd.argl1 = (void *) hfc; /* argument for our local routine */ -- hfc->regd.dch_l2l1 = hfcusb_l1_access; -- hfc->regd.bch_l2l1 = hfcusb_bch_access; -- hfc->regd.drvname = "hfc_usb"; -- if (hisax_register_hfcusb(&hfc->regd)) { -- printk(KERN_INFO "HFC-USB failed to register at hisax\n"); -- Write_hfc(hfc, HFCUSB_CIRM, 0x08); /* aux = input, reset on */ -- return (1); -- } -- -- /* startup the D- and E-channel fifos */ -- start_rx_fifo(hfc->fifos + HFCUSB_D_RX); /* D-fifo */ -- if (hfc->fifos[HFCUSB_PCM_RX].pipe) -- start_rx_fifo(hfc->fifos + HFCUSB_PCM_RX); /* E-fifo */ -+ hfc->t4_timer.function = (void *) l1_timer_expire_t4; -+ /* init the led timer */ -+ init_timer(&hfc->led_timer); -+ hfc->led_timer.data = (long) hfc; -+ hfc->led_timer.function = (void *) led_timer; -+ // trigger 4 hz led timer -+ hfc->led_timer.expires = jiffies + (LED_TIME * HZ) / 1000; -+ if(!timer_pending(&hfc->led_timer)) add_timer(&hfc->led_timer); -+ -+ // init the background machinery for control requests -+ hfc->ctrl_read.bRequestType = 0xc0; -+ hfc->ctrl_read.bRequest = 1; -+ hfc->ctrl_read.wLength = 1; -+ hfc->ctrl_write.bRequestType = 0x40; -+ hfc->ctrl_write.bRequest = 0; -+ hfc->ctrl_write.wLength = 0; -+ usb_fill_control_urb(hfc->ctrl_urb, hfc->dev, hfc->ctrl_out_pipe,(u_char *) & hfc->ctrl_write, NULL, 0, ctrl_complete, hfc); -+ -+ /* Init All Fifos */ -+ for(i = 0; i < HFCUSB_NUM_FIFOS; i++) -+ { -+ hfc->fifos[i].iso[0].purb = NULL; -+ hfc->fifos[i].iso[1].purb = NULL; -+ hfc->fifos[i].active = 0; -+ } -+ -+ // register like Germaschewski : -+ hfc->d_if.owner = THIS_MODULE; -+ hfc->d_if.ifc.priv = &hfc->fifos[HFCUSB_D_TX]; -+ hfc->d_if.ifc.l2l1 = hfc_usb_l2l1; -+ -+ for (i=0; i<2; i++) -+ { -+ hfc->b_if[i].ifc.priv = &hfc->fifos[HFCUSB_B1_TX+i*2]; -+ hfc->b_if[i].ifc.l2l1 = hfc_usb_l2l1; -+ p_b_if[i] = &hfc->b_if[i]; -+ } -+ -+ hfc->protocol = 2; /* default EURO ISDN, should be a module_param */ -+ hisax_register(&hfc->d_if, p_b_if, "hfc_usb", hfc->protocol); -+ -+ for (i=0; i<4; i++) -+ hfc->fifos[i].hif=&p_b_if[i/2]->ifc; -+ for (i=4; i<8; i++) -+ hfc->fifos[i].hif=&hfc->d_if.ifc; -+ -+ // 3 (+1) INT IN + 3 ISO OUT -+ if(hfc->cfg_used == CNF_3INT3ISO || hfc->cfg_used == CNF_4INT3ISO) -+ { -+ start_int_fifo(hfc->fifos + HFCUSB_D_RX); // Int IN D-fifo -+ if(hfc->fifos[HFCUSB_PCM_RX].pipe) start_int_fifo(hfc->fifos + HFCUSB_PCM_RX); // E-fifo -+ start_int_fifo(hfc->fifos + HFCUSB_B1_RX); // Int IN B1-fifo -+ start_int_fifo(hfc->fifos + HFCUSB_B2_RX); // Int IN B2-fifo -+ } -+ -+ // 3 (+1) ISO IN + 3 ISO OUT -+ if(hfc->cfg_used==CNF_3ISO3ISO || hfc->cfg_used==CNF_4ISO3ISO) -+ { -+ start_isoc_chain(hfc->fifos + HFCUSB_D_RX, ISOC_PACKETS_D, rx_iso_complete,16); -+ if(hfc->fifos[HFCUSB_PCM_RX].pipe) start_isoc_chain(hfc->fifos + HFCUSB_PCM_RX, ISOC_PACKETS_D, rx_iso_complete,16); -+ start_isoc_chain(hfc->fifos + HFCUSB_B1_RX, ISOC_PACKETS_B, rx_iso_complete,16); -+ start_isoc_chain(hfc->fifos + HFCUSB_B2_RX, ISOC_PACKETS_B, rx_iso_complete,16); -+ } -+ -+ start_isoc_chain(hfc->fifos + HFCUSB_D_TX, ISOC_PACKETS_D, tx_iso_complete,1); -+ start_isoc_chain(hfc->fifos + HFCUSB_B1_TX, ISOC_PACKETS_B, tx_iso_complete,1); -+ start_isoc_chain(hfc->fifos + HFCUSB_B2_TX, ISOC_PACKETS_B, tx_iso_complete,1); -+ -+ handle_led(hfc,LED_POWER_ON); -+ -+ return(0); -+} /* usb_init */ -+ -+ -+/****************************************/ -+/* data defining the devices to be used */ -+/****************************************/ -+// static __devinitdata const struct usb_device_id hfc_usb_idtab[3] = { -+static struct usb_device_id hfc_usb_idtab[] = { -+ {USB_DEVICE(0x7b0, 0x0007)}, /* Billion USB TA 2 */ -+ {USB_DEVICE(0x742, 0x2008)}, /* Stollmann USB TA */ -+ {USB_DEVICE(0x959, 0x2bd0)}, /* Colognechip USB eval TA */ -+ {USB_DEVICE(0x8e3, 0x0301)}, /* OliTec ISDN USB */ -+ {USB_DEVICE(0x675, 0x1688)}, /* DrayTec ISDN USB */ -+ {USB_DEVICE(0x7fa, 0x0846)}, /* Bewan ISDN USB TA */ -+ {} /* end with an all-zeroes entry */ -+}; -+ -+MODULE_AUTHOR("Peter Sprenger (sprenger@moving-byters.de)/Martin Bachem (info@colognechip.com)"); -+MODULE_DESCRIPTION("HFC I4L USB driver"); -+MODULE_DEVICE_TABLE(usb, hfc_usb_idtab); -+MODULE_LICENSE("GPL"); -+ -+#define EP_NUL 1 // Endpoint at this position not allowed -+#define EP_NOP 2 // all type of endpoints allowed at this position -+#define EP_ISO 3 // Isochron endpoint mandatory at this position -+#define EP_BLK 4 // Bulk endpoint mandatory at this position -+#define EP_INT 5 // Interrupt endpoint mandatory at this position -+ -+// this array represents all endpoints possible in the HCF-USB -+// the last 2 entries are the configuration number and the minimum interval for Interrupt endpoints -+int validconf[][18]= -+{ -+ // INT in, ISO out config -+ {EP_NUL,EP_INT,EP_NUL,EP_INT,EP_NUL,EP_INT,EP_NOP,EP_INT,EP_ISO,EP_NUL,EP_ISO,EP_NUL,EP_ISO,EP_NUL,EP_NUL,EP_NUL,CNF_4INT3ISO,2}, -+ {EP_NUL,EP_INT,EP_NUL,EP_INT,EP_NUL,EP_INT,EP_NUL,EP_NUL,EP_ISO,EP_NUL,EP_ISO,EP_NUL,EP_ISO,EP_NUL,EP_NUL,EP_NUL,CNF_3INT3ISO,2}, -+ // ISO in, ISO out config -+ {EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_NOP,EP_ISO,CNF_4ISO3ISO,2}, -+ {EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_NUL,EP_NUL,CNF_3ISO3ISO,2}, -+ {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0} // EOL element -+}; -+ -+// string description of chosen config -+char *conf_str[]= -+{ -+ "4 Interrupt IN + 3 Isochron OUT", -+ "3 Interrupt IN + 3 Isochron OUT", -+ "4 Isochron IN + 3 Isochron OUT", -+ "3 Isochron IN + 3 Isochron OUT" -+}; - -- return (0); --} /* usb_init */ - - /*************************************************/ - /* function called to probe a new plugged device */ - /*************************************************/ --static void * --hfc_usb_probe(struct usb_device *dev, unsigned int interface --#ifdef COMPAT_HAS_USB_IDTAB -- , const struct usb_device_id *id_table) --#else -- ) --#endif -+//static int hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) -+static void* hfc_usb_probe(struct usb_device *dev, unsigned int ifnum, const struct usb_device_id *id) - { -+ //struct usb_device *dev= interface_to_usbdev(intf); -+ struct usb_interface* intf = dev->actconfig->interface + ifnum; - hfcusb_data *context; -- struct usb_interface *ifp = dev->actconfig->interface + interface; -- struct usb_interface_descriptor *ifdp = -- ifp->altsetting + ifp->act_altsetting; -- struct usb_endpoint_descriptor *epd; -- int i, idx, ep_msk; -- --#ifdef COMPAT_HAS_USB_IDTAB -- if (id_table && (dev->descriptor.idVendor == id_table->idVendor) && -- (dev->descriptor.idProduct == id_table->idProduct) && --#else -- if ((((dev->descriptor.idVendor == 0x959) && -- (dev->descriptor.idProduct == 0x2bd0)) || -- ((dev->descriptor.idVendor == 0x7b0) && -- (dev->descriptor.idProduct == 0x0006))) && --#endif -- (ifdp->bNumEndpoints >= 6) && (ifdp->bNumEndpoints <= 16)) { -- if (!(context = kmalloc(sizeof(hfcusb_data), GFP_KERNEL))) { -- return (NULL); /* got no mem */ -- }; -- memset(context, 0, sizeof(hfcusb_data)); /* clear the structure */ -- i = ifdp->bNumEndpoints; /* get number of endpoints */ -- ep_msk = 0; /* none found */ -- epd = ifdp->endpoint; /* first endpoint descriptor */ -- while (i-- && ((ep_msk & 0xcf) != 0xcf)) { -- -- idx = (((epd->bEndpointAddress & 0x7f) - 1) << 1); /* get endpoint base */ -- if (idx < 7) { -- switch (epd->bmAttributes) { -- case USB_ENDPOINT_XFER_INT: -- if (! -- (epd-> -- bEndpointAddress & -- 0x80)) -- break; /* only interrupt in allowed */ -- idx++; /* input index is odd */ -- context->fifos[idx].pipe = -- usb_rcvintpipe(dev, -- epd-> -- bEndpointAddress); -- break; -- -- case USB_ENDPOINT_XFER_BULK: -- if (epd-> -- bEndpointAddress & -- 0x80) -- break; /* only bulk out allowed */ -- context->fifos[idx].pipe = -- usb_sndbulkpipe(dev, -- epd-> -- bEndpointAddress); -- break; -- default: -- context->fifos[idx].pipe = 0; /* reset data */ -- } /* switch attribute */ -- -- if (context->fifos[idx].pipe) { -- context->fifos[idx].fifonum = idx; -- context->fifos[idx].fifo_mask = -- 1 << idx; -- context->fifos[idx].hfc = context; -- context->fifos[idx].usb_maxlen = -- epd->wMaxPacketSize; -- context->fifos[idx].intervall = -- epd->bInterval; -- ep_msk |= (1 << idx); -- } else -- ep_msk &= ~(1 << idx); -- } /* idx < 7 */ -- epd++; -- } -+ //struct usb_host_interface *iface = intf->cur_altsetting; -+ //struct usb_host_interface *iface_used = NULL; -+ //struct usb_host_endpoint *ep; -+ struct usb_endpoint_descriptor* ep; -+ //int ifnum = iface->desc.bInterfaceNumber; -+ struct usb_interface_descriptor* intfdesc = intf->altsetting + intf->act_altsetting; -+ struct usb_interface_descriptor* intfdesc_used = NULL; -+ int i, idx, alt_idx, probe_alt_setting, vend_idx, cfg_used, *vcf, attr, cfg_found, cidx, ep_addr; -+ int cmptbl[16],small_match,iso_packet_size,packet_size,alt_used=0; -+ -+// usb_show_device(dev); -+// usb_show_device_descriptor(&dev->descriptor); -+// usb_show_interface_descriptor(&iface->desc); -+ vend_idx=0xffff; -+ for(i=0;vdata[i].vendor;i++) -+ { -+ if(dev->descriptor.idVendor==vdata[i].vendor && dev->descriptor.idProduct==vdata[i].prod_id) vend_idx=i; -+ } -+ - -- if ((ep_msk & 0x3f) != 0x3f) { -- kfree(context); -- return (NULL); -- } -- MOD_INC_USE_COUNT; /* lock our module */ -- context->dev = dev; /* save device */ -- context->if_used = interface; /* save used interface */ -- context->alt_used = ifp->act_altsetting; /* and alternate config */ -- context->ctrl_paksize = dev->descriptor.bMaxPacketSize0; /* control size */ -- -- /* create the control pipes needed for register access */ -- context->ctrl_in_pipe = usb_rcvctrlpipe(context->dev, 0); -- context->ctrl_out_pipe = usb_sndctrlpipe(context->dev, 0); -- -- /* init the chip and register the driver */ -- if (usb_init(context)) { -- kfree(context); -- MOD_DEC_USE_COUNT; -- return (NULL); -- } -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "HFC-USB: probing interface(%d) actalt(%d)\n", -+ ifnum, intfdesc->bAlternateSetting); -+ /* printk(KERN_INFO "HFC-USB: probing interface(%d) actalt(%d) minor(%d)\n", -+ ifnum, intfdesc->bAlternateSetting, intf->driver->minor); */ -+#endif - -- printk(KERN_INFO -- "HFC-USB: New device if=%d alt=%d registered\n", -- context->if_used, context->alt_used); -- return (context); -- } -+ if (vend_idx != 0xffff) { -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "HFC-USB: found vendor idx:%d name:%s\n",vend_idx,vdata[vend_idx].vend_name); -+#endif -+ /* if vendor and product ID is OK, start probing a matching alternate setting ... */ -+ alt_idx = 0; -+ small_match=0xffff; -+ // default settings -+ iso_packet_size=16; -+ packet_size=64; -+ -+ while (alt_idx < intf->num_altsetting) { -+ //iface = intf->altsetting + alt_idx; -+ intfdesc = intf->altsetting + alt_idx; -+ probe_alt_setting = intfdesc->bAlternateSetting; -+ cfg_used=0; - -- return (NULL); /* no matching entry */ --} /* hfc_usb_probe */ -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "HFC-USB: test alt_setting %d\n", probe_alt_setting); -+#endif -+ // check for config EOL element -+ while (validconf[cfg_used][0]) { -+ cfg_found=TRUE; -+ vcf=validconf[cfg_used]; -+ ep = intfdesc->endpoint; /* first endpoint descriptor */ -+ -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "HFC-USB: (if=%d alt=%d cfg_used=%d)\n", -+ ifnum, probe_alt_setting, cfg_used); -+#endif -+ // copy table -+ memcpy(cmptbl,vcf,16*sizeof(int)); -+ -+ // check for all endpoints in this alternate setting -+ for (i=0; i < intfdesc->bNumEndpoints; i++) { -+ ep_addr = ep->bEndpointAddress; -+ idx = ((ep_addr & 0x7f)-1)*2; /* get endpoint base */ -+ if (ep_addr & 0x80) -+ idx++; -+ attr = ep->bmAttributes; -+ -+ if (cmptbl[idx] == EP_NUL) { -+ printk(KERN_INFO "HFC-USB: cfg_found=FALSE in idx:%d attr:%d cmptbl[%d]:%d\n", -+ idx, attr, idx, cmptbl[idx]); -+ cfg_found = FALSE; -+ } -+ -+ if (attr == USB_ENDPOINT_XFER_INT && cmptbl[idx] == EP_INT) -+ cmptbl[idx] = EP_NUL; -+ if (attr == USB_ENDPOINT_XFER_BULK && cmptbl[idx] == EP_BLK) -+ cmptbl[idx] = EP_NUL; -+ if (attr == USB_ENDPOINT_XFER_ISOC && cmptbl[idx] == EP_ISO) -+ cmptbl[idx] = EP_NUL; -+ -+ // check if all INT endpoints match minimum interval -+ if (attr == USB_ENDPOINT_XFER_INT && ep->bInterval < vcf[17]) { -+#ifdef VERBOSE_USB_DEBUG -+ if (cfg_found) -+ printk(KERN_INFO "HFC-USB: Interrupt Endpoint interval < %d found - skipping config\n", -+ vcf[17]); -+#endif -+ cfg_found = FALSE; -+ } -+ -+ ep++; -+ } -+ -+ for (i = 0; i < 16; i++) { -+ // printk(KERN_INFO "HFC-USB: cmptbl[%d]:%d\n", i, cmptbl[i]); -+ -+ // all entries must be EP_NOP or EP_NUL for a valid config -+ if (cmptbl[i] != EP_NOP && cmptbl[i] != EP_NUL) -+ cfg_found = FALSE; -+ } -+ -+ // we check for smallest match, to provide configuration priority -+ // configurations with smaller index have higher priority -+ if (cfg_found) { -+ if (cfg_used < small_match) { -+ small_match = cfg_used; -+ alt_used = probe_alt_setting; -+ //iface_used = iface; -+ intfdesc_used = intfdesc; -+ } -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "HFC-USB: small_match=%x %x\n", small_match, alt_used); -+#endif -+ } -+ -+ cfg_used++; -+ } -+ -+ alt_idx++; -+ } /* (alt_idx < intf->num_altsetting) */ -+#ifdef VERBOSE_USB_DEBUG -+ printk(KERN_INFO "HFC-USB: final small_match=%x alt_used=%x\n",small_match, alt_used); -+#endif -+ // yiipiee, we found a valid config -+ if (small_match != 0xffff) { -+ //iface = iface_used; -+ intfdesc = intfdesc_used; -+ -+ if (!(context = kmalloc(sizeof(hfcusb_data), GFP_KERNEL))) -+ return(NULL); /* got no mem */ -+ memset(context, 0, sizeof(hfcusb_data)); /* clear the structure */ -+ -+ ep = intfdesc->endpoint; /* first endpoint descriptor */ -+ vcf = validconf[small_match]; -+ -+ for (i = 0; i < intfdesc->bNumEndpoints; i++) { -+ ep_addr = ep->bEndpointAddress; -+ idx = ((ep_addr & 0x7f)-1)*2; /* get endpoint base */ -+ if (ep_addr & 0x80) -+ idx++; -+ cidx = idx & 7; -+ attr = ep->bmAttributes; -+ -+ // only initialize used endpoints -+ if (vcf[idx] != EP_NOP && vcf[idx] != EP_NUL) { -+ switch (attr) { -+ case USB_ENDPOINT_XFER_INT: -+ context->fifos[cidx].pipe = usb_rcvintpipe(dev, ep->bEndpointAddress); -+ context->fifos[cidx].usb_transfer_mode = USB_INT; -+ packet_size = ep->wMaxPacketSize; // remember max packet size -+#ifdef VERBOSE_USB_DEBUG -+ printk (KERN_INFO "HFC-USB: Interrupt-In Endpoint found %d ms(idx:%d cidx:%d)!\n", -+ ep->bInterval, idx, cidx); -+#endif -+ break; -+ case USB_ENDPOINT_XFER_BULK: -+ if (ep_addr & 0x80) -+ context->fifos[cidx].pipe = usb_rcvbulkpipe(dev, ep->bEndpointAddress); -+ else -+ context->fifos[cidx].pipe = usb_sndbulkpipe(dev, ep->bEndpointAddress); -+ context->fifos[cidx].usb_transfer_mode = USB_BULK; -+ packet_size = ep->wMaxPacketSize; // remember max packet size -+#ifdef VERBOSE_USB_DEBUG -+ printk (KERN_INFO "HFC-USB: Bulk Endpoint found (idx:%d cidx:%d)!\n", -+ idx, cidx); -+#endif -+ break; -+ case USB_ENDPOINT_XFER_ISOC: -+ if (ep_addr & 0x80) -+ context->fifos[cidx].pipe = usb_rcvisocpipe(dev, ep->bEndpointAddress); -+ else -+ context->fifos[cidx].pipe = usb_sndisocpipe(dev, ep->bEndpointAddress); -+ context->fifos[cidx].usb_transfer_mode = USB_ISOC; -+ iso_packet_size = ep->wMaxPacketSize; // remember max packet size -+#ifdef VERBOSE_USB_DEBUG -+ printk (KERN_INFO "HFC-USB: ISO Endpoint found (idx:%d cidx:%d)!\n", -+ idx, cidx); -+#endif -+ break; -+ default: -+ context->fifos[cidx].pipe = 0; /* reset data */ -+ } /* switch attribute */ -+ -+ if (context->fifos[cidx].pipe) { -+ context->fifos[cidx].fifonum = cidx; -+ context->fifos[cidx].hfc = context; -+ context->fifos[cidx].usb_packet_maxlen = ep->wMaxPacketSize; -+ context->fifos[cidx].intervall = ep->bInterval; -+ context->fifos[cidx].skbuff = NULL; -+#ifdef VERBOSE_USB_DEBUG -+ printk (KERN_INFO "HFC-USB: fifo%d pktlen %d interval %d\n", -+ context->fifos[cidx].fifonum, -+ context->fifos[cidx].usb_packet_maxlen, -+ context->fifos[cidx].intervall); -+#endif -+ } -+ } -+ -+ ep++; -+ } -+ -+ // now share our luck -+ context->dev = dev; /* save device */ -+ context->if_used = ifnum; /* save used interface */ -+ context->alt_used = alt_used; /* and alternate config */ -+ context->ctrl_paksize = dev->descriptor.bMaxPacketSize0; /* control size */ -+ context->cfg_used=vcf[16]; // store used config -+ context->vend_idx=vend_idx; // store found vendor -+ context->packet_size=packet_size; -+ context->iso_packet_size=iso_packet_size; -+ -+ /* create the control pipes needed for register access */ -+ context->ctrl_in_pipe = usb_rcvctrlpipe(context->dev, 0); -+ context->ctrl_out_pipe = usb_sndctrlpipe(context->dev, 0); -+ context->ctrl_urb = usb_alloc_urb(0); -+ -+ printk(KERN_INFO "HFC-USB: detected \"%s\" configuration: %s (if=%d alt=%d)\n", -+ vdata[vend_idx].vend_name, conf_str[small_match], context->if_used, context->alt_used); -+ -+ /* init the chip and register the driver */ -+ if (usb_init(context)) -+ { -+ if (context->ctrl_urb) { -+ usb_unlink_urb(context->ctrl_urb); -+ usb_free_urb(context->ctrl_urb); -+ context->ctrl_urb = NULL; -+ } -+ kfree(context); -+ return(NULL); -+ } -+ //usb_set_intfdata(intf, context); -+ //intf->private_data = context; -+ return(context); -+ } -+ } -+ return(NULL); -+} - - /****************************************************/ - /* function called when an active device is removed */ - /****************************************************/ --static void --hfc_usb_disconnect(struct usb_device *usbdev, void *drv_context) -+//static void hfc_usb_disconnect(struct usb_interface *intf) -+static void hfc_usb_disconnect(struct usb_device *usbdev, void* drv_context) - { -- hfcusb_data *context = drv_context; -+ //hfcusb_data *context = intf->private_data; -+ hfcusb_data* context = drv_context; - int i; -- struct sk_buff *skb; - -- /* tell all fifos to terminate */ -- for (i = 0; i < HFCUSB_NUM_FIFOS; i++) -- if (context->fifos[i].active) { -- context->fifos[i].active = 0; -- usb_unlink_urb(&context->fifos[i].urb); -- } -- while (context->active_fifos) { -- set_current_state(TASK_INTERRUPTIBLE); -- /* Timeout 10ms */ -- schedule_timeout((10 * HZ) / 1000); -- } -+ printk(KERN_INFO "HFC-USB: device disconnect\n"); -+ -+ //intf->private_data = NULL; -+ if (!context) -+ return; - if (timer_pending(&context->t3_timer)) - del_timer(&context->t3_timer); -- context->regd.release_driver(context->regd.arg_hisax); -- while ((skb = skb_dequeue(&context->regd.erq)) != NULL) -- dev_kfree_skb_any(skb); -+ if (timer_pending(&context->t4_timer)) -+ del_timer(&context->t4_timer); -+ if (timer_pending(&context->led_timer)) -+ del_timer(&context->led_timer); -+ -+ hisax_unregister(&context->d_if); - -+ /* tell all fifos to terminate */ -+ for(i = 0; i < HFCUSB_NUM_FIFOS; i++) { -+ if(context->fifos[i].usb_transfer_mode == USB_ISOC) { -+ if(context->fifos[i].active > 0) { -+ stop_isoc_chain(&context->fifos[i]); -+#ifdef VERBOSE_USB_DEBUG -+ printk (KERN_INFO "HFC-USB: hfc_usb_disconnect: stopping ISOC chain Fifo no %i\n", i); -+#endif -+ } -+ } else { -+ if(context->fifos[i].active > 0) { -+ context->fifos[i].active = 0; -+#ifdef VERBOSE_USB_DEBUG -+ printk (KERN_INFO "HFC-USB: hfc_usb_disconnect: unlinking URB for Fifo no %i\n", i); -+#endif -+ } -+ if (context->fifos[i].urb) { -+ usb_unlink_urb(context->fifos[i].urb); -+ usb_free_urb(context->fifos[i].urb); -+ context->fifos[i].urb = NULL; -+ } -+ } -+ context->fifos[i].active = 0; -+ } -+ if (context->ctrl_urb) { -+ usb_unlink_urb(context->ctrl_urb); -+ usb_free_urb(context->ctrl_urb); -+ context->ctrl_urb = NULL; -+ } - kfree(context); /* free our structure again */ -- MOD_DEC_USE_COUNT; /* and decrement the usage counter */ - } /* hfc_usb_disconnect */ - -+ - /************************************/ - /* our driver information structure */ - /************************************/ - static struct usb_driver hfc_drv = { - name:"hfc_usb", --#ifdef COMPAT_HAS_USB_IDTAB - id_table:hfc_usb_idtab, --#endif - probe:hfc_usb_probe, - disconnect:hfc_usb_disconnect, - }; - --static void __exit --hfc_usb_exit(void) --{ - -+static void __exit hfc_usb_exit(void) -+{ -+#ifdef VERBOSE_USB_DEBUG -+ printk ("HFC-USB: calling \"hfc_usb_exit\" ...\n"); -+#endif - usb_deregister(&hfc_drv); /* release our driver */ - printk(KERN_INFO "HFC-USB module removed\n"); - } - --static int __init --hfc_usb_init(void) -+static int __init hfc_usb_init(void) - { -- struct hisax_drvreg drv; -+ printk ("HFC-USB: driver module revision %s loaded\n", hfcusb_revision); - -- drv.version = HISAX_LOAD_VERSION; /* set our version */ -- drv.cmd = HISAX_LOAD_CHKVER; /* check command only */ -- if (hisax_register_hfcusb(&drv)) { -- printk(KERN_INFO "HFC-USB <-> hisax version conflict\n"); -- return (-1); /* unable to register */ -- } -- if (usb_register(&hfc_drv)) { -- printk(KERN_INFO -- "Unable to register HFC-USB module at usb stack\n"); -- return (-1); /* unable to register */ -+ if(usb_register(&hfc_drv)) -+ { -+ printk(KERN_INFO "HFC-USB: Unable to register HFC-USB module at usb stack\n"); -+ return(-1); /* unable to register */ - } -- -- printk(KERN_INFO "HFC-USB module loaded\n"); -- return (0); -+ return(0); - } - -+ -+ -+ -+ - module_init(hfc_usb_init); - module_exit(hfc_usb_exit); -+ -- cgit v1.2.3