From a91ec2f50f4e64ec4b83c3f6e9d9f07104c035c7 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Mon, 1 Dec 2014 13:27:26 +0000
Subject: brcm63xx: add kernel 3.18 support

Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43461 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../patches-3.18/516-board_96348A-122.patch        | 95 ++++++++++++++++++++++
 1 file changed, 95 insertions(+)
 create mode 100644 target/linux/brcm63xx/patches-3.18/516-board_96348A-122.patch

(limited to 'target/linux/brcm63xx/patches-3.18/516-board_96348A-122.patch')

diff --git a/target/linux/brcm63xx/patches-3.18/516-board_96348A-122.patch b/target/linux/brcm63xx/patches-3.18/516-board_96348A-122.patch
new file mode 100644
index 0000000000..3352d5e508
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/516-board_96348A-122.patch
@@ -0,0 +1,95 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -583,6 +583,76 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_96348A_122 = {
++	.name				= "96348A-122",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++	.use_fallback_sprom		= 1,
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.has_ohci0 = 1,
++
++	.leds = {
++		{
++			.name		= "96348A-122:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "96348A-122:red:alarm",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96348A-122:green:wps",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 33,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wlan",
++			.gpio		= 34,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WLAN,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 35,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++
++	.fallback_sprom = {
++		.type 				= SPROM_BCM4318,
++		.pci_bus			= 0,
++		.pci_dev			= 1,
++	},
++};
++
+ static struct board_info __initdata board_96348gw = {
+ 	.name				= "96348GW",
+ 	.expected_cpu_id		= 0x6348,
+@@ -1850,6 +1920,7 @@ static const struct board_info __initcon
+ 	&board_V2500V_BB,
+ 	&board_V2110,
+ 	&board_ct536_ct5621,
++	&board_96348A_122,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -1887,6 +1958,7 @@ static struct of_device_id const bcm963x
+ 	{ .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
+ 	{ .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
+ 	{ .compatible = "comtrend,ct-536+", .data = &board_ct536_ct5621, },
++	{ .compatible = "comtrend,ct-5365", .data = &board_96348A_122, },
+ 	{ .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, },
+ 	{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
+ 	{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-- 
cgit v1.2.3