From c7b4b4cee2c7b72d6f52592f3b57f2c45e48b253 Mon Sep 17 00:00:00 2001 From: Daniel Gonzalez Cabanelas Date: Sat, 12 Aug 2017 12:40:22 +0200 Subject: brcm63xx: Add Comtrend AR-5315u support Add support for the Comtrend AR-5315u router This a BCM6318 based board, 64 MB RAM, 16 MB SPI flash, with an onboard BCM43217 wifi, 4 ethernet ports and 1 USB host port Signed-off-by: Daniel Gonzalez Cabanelas [jonas.gorski: refreshed patch] Signed-off-by: Jonas Gorski --- target/linux/brcm63xx/dts/ar-5315u.dts | 106 +++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) create mode 100644 target/linux/brcm63xx/dts/ar-5315u.dts (limited to 'target/linux/brcm63xx/dts/ar-5315u.dts') diff --git a/target/linux/brcm63xx/dts/ar-5315u.dts b/target/linux/brcm63xx/dts/ar-5315u.dts new file mode 100644 index 0000000000..63883f048b --- /dev/null +++ b/target/linux/brcm63xx/dts/ar-5315u.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +#include "bcm6318.dtsi" + +#include + +/ { + model = "Comtrend AR-5315u"; + compatible = "comtrend,ar-5315u", "brcm,bcm6318"; + + chosen { + bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + debounce-interval = <60>; + + wps { + label = "wps"; + gpios = <&pinctrl 3 1>; + linux,code = ; + }; + reset { + label = "reset"; + gpios = <&pinctrl 33 1>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wps_green { + label = "AR-5315u:green:wps"; + gpios = <&pinctrl 0 1>; + }; + power_green { + label = "AR-5315u:green:power"; + gpios = <&pinctrl 1 1>; + default-state = "on"; + }; + usb_green { + label = "AR-5315u:green:usb"; + gpios = <&pinctrl 2 1>; + }; + inet_green { + label = "AR-5315u:green:inet"; + gpios = <&pinctrl 8 1>; + }; + inet_red { + label = "AR-5315u:red:inet"; + gpios = <&pinctrl 9 1>; + }; + dsl_green { + label = "AR-5315u:green:dsl"; + gpios = <&pinctrl 10 1>; + }; + power_red { + label = "AR-5315u:red:power"; + gpios = <&pinctrl 11 1>; + }; + }; +}; + +&hsspi { + status = "ok"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <62500000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + reg = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + linux,part-probe = "bcm63xxpart"; + + cfe@0 { + reg = <0x000000 0x010000>; + label = "cfe"; + read-only; + }; + + linux@10000 { + reg = <0x010000 0xfe0000>; + label = "linux"; + }; + + nvram@ff0000 { + reg = <0xff0000 0x010000>; + label = "nvram"; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led + &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>; +}; -- cgit v1.2.3