From 8e738da02c77b69d2fa8c1ef52faf2af6388b916 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 7 Dec 2014 15:34:28 +0000 Subject: brcm47xx: remove kernel 3.10 Signed-off-by: Hauke Mehrtens SVN-Revision: 43535 --- .../patches-3.10/205-b44-add-phylib-support.patch | 332 --------------------- 1 file changed, 332 deletions(-) delete mode 100644 target/linux/brcm47xx/patches-3.10/205-b44-add-phylib-support.patch (limited to 'target/linux/brcm47xx/patches-3.10/205-b44-add-phylib-support.patch') diff --git a/target/linux/brcm47xx/patches-3.10/205-b44-add-phylib-support.patch b/target/linux/brcm47xx/patches-3.10/205-b44-add-phylib-support.patch deleted file mode 100644 index 82fd96515d..0000000000 --- a/target/linux/brcm47xx/patches-3.10/205-b44-add-phylib-support.patch +++ /dev/null @@ -1,332 +0,0 @@ -From 86f4ea63e696db996f68d1065b55506e75a7d765 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Fri, 20 Dec 2013 02:16:10 +0100 -Subject: [PATCH 205/208] b44: add phylib support - -Most of the older home routers based on the Broadcom BCM47XX SoC series -are using a MAC that is supported by b44. On most of these routers not -the internal PHY of this MAC core is used, but a switch sometimes on an -external chip or integrated into the same SoC as the Ethernet core. -For this switch a special PHY driver is needed which should not be -integrated into b44 as the same switches are also used by other -Broadcom home networking SoCs which are using different Ethernet MAC -drivers. This was tested with the b53 switch driver which is currently -on its way to mainline. - -If the internal PHY is not used, b44 will now search on the MDIO bus -for a phy and use the Linux phylib subsystem to register a driver. -Support for the internal PHY must stay here, because there are some -device which are suing the internal phy. - -With this patch we scan the mdio bus when the sprom or nvram says that -the PHY address is 30, if a PHY was found at this address b44 uses it. - -This was tested with a BCM4704, BCM4712 and BCM5354. - -Signed-off-by: Hauke Mehrtens -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/broadcom/Kconfig | 1 + - drivers/net/ethernet/broadcom/b44.c | 190 ++++++++++++++++++++++++++++++++- - drivers/net/ethernet/broadcom/b44.h | 3 + - 3 files changed, 189 insertions(+), 5 deletions(-) - ---- a/drivers/net/ethernet/broadcom/Kconfig -+++ b/drivers/net/ethernet/broadcom/Kconfig -@@ -24,6 +24,7 @@ config B44 - select SSB - select NET_CORE - select MII -+ select PHYLIB - ---help--- - If you have a network (Ethernet) controller of this type, say Y - or M and read the Ethernet-HOWTO, available from ---- a/drivers/net/ethernet/broadcom/b44.c -+++ b/drivers/net/ethernet/broadcom/b44.c -@@ -6,6 +6,7 @@ - * Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org) - * Copyright (C) 2006 Broadcom Corporation. - * Copyright (C) 2007 Michael Buesch -+ * Copyright (C) 2013 Hauke Mehrtens - * - * Distribute under GPL. - */ -@@ -29,6 +30,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -316,6 +318,23 @@ static void b44_mdio_write_mii(struct ne - __b44_writephy(bp, phy_id, location, val); - } - -+static int b44_mdio_read_phylib(struct mii_bus *bus, int phy_id, int location) -+{ -+ u32 val; -+ struct b44 *bp = bus->priv; -+ int rc = __b44_readphy(bp, phy_id, location, &val); -+ if (rc) -+ return 0xffffffff; -+ return val; -+} -+ -+static int b44_mdio_write_phylib(struct mii_bus *bus, int phy_id, int location, -+ u16 val) -+{ -+ struct b44 *bp = bus->priv; -+ return __b44_writephy(bp, phy_id, location, val); -+} -+ - static int b44_phy_reset(struct b44 *bp) - { - u32 val; -@@ -523,10 +542,12 @@ static void b44_check_phy(struct b44 *bp - - if (bp->flags & B44_FLAG_EXTERNAL_PHY) { - bp->flags |= B44_FLAG_100_BASE_T; -- bp->flags |= B44_FLAG_FULL_DUPLEX; - if (!netif_carrier_ok(bp->dev)) { - u32 val = br32(bp, B44_TX_CTRL); -- val |= TX_CTRL_DUPLEX; -+ if (bp->flags & B44_FLAG_FULL_DUPLEX) -+ val |= TX_CTRL_DUPLEX; -+ else -+ val &= ~TX_CTRL_DUPLEX; - bw32(bp, B44_TX_CTRL, val); - netif_carrier_on(bp->dev); - b44_link_report(bp); -@@ -1805,6 +1826,11 @@ static int b44_get_settings(struct net_d - { - struct b44 *bp = netdev_priv(dev); - -+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) { -+ BUG_ON(!bp->phydev); -+ return phy_ethtool_gset(bp->phydev, cmd); -+ } -+ - cmd->supported = (SUPPORTED_Autoneg); - cmd->supported |= (SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | -@@ -1846,7 +1872,23 @@ static int b44_get_settings(struct net_d - static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) - { - struct b44 *bp = netdev_priv(dev); -- u32 speed = ethtool_cmd_speed(cmd); -+ u32 speed; -+ int ret; -+ -+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) { -+ BUG_ON(!bp->phydev); -+ spin_lock_irq(&bp->lock); -+ if (netif_running(dev)) -+ b44_setup_phy(bp); -+ -+ ret = phy_ethtool_sset(bp->phydev, cmd); -+ -+ spin_unlock_irq(&bp->lock); -+ -+ return ret; -+ } -+ -+ speed = ethtool_cmd_speed(cmd); - - /* We do not support gigabit. */ - if (cmd->autoneg == AUTONEG_ENABLE) { -@@ -2076,7 +2118,6 @@ static const struct ethtool_ops b44_etht - - static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) - { -- struct mii_ioctl_data *data = if_mii(ifr); - struct b44 *bp = netdev_priv(dev); - int err = -EINVAL; - -@@ -2084,7 +2125,12 @@ static int b44_ioctl(struct net_device * - goto out; - - spin_lock_irq(&bp->lock); -- err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL); -+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) { -+ BUG_ON(!bp->phydev); -+ err = phy_mii_ioctl(bp->phydev, ifr, cmd); -+ } else { -+ err = generic_mii_ioctl(&bp->mii_if, if_mii(ifr), cmd, NULL); -+ } - spin_unlock_irq(&bp->lock); - out: - return err; -@@ -2146,6 +2192,127 @@ static const struct net_device_ops b44_n - #endif - }; - -+static void b44_adjust_link(struct net_device *dev) -+{ -+ struct b44 *bp = netdev_priv(dev); -+ struct phy_device *phydev = bp->phydev; -+ bool status_changed = 0; -+ -+ BUG_ON(!phydev); -+ -+ if (bp->old_link != phydev->link) { -+ status_changed = 1; -+ bp->old_link = phydev->link; -+ } -+ -+ /* reflect duplex change */ -+ if (phydev->link) { -+ if ((phydev->duplex == DUPLEX_HALF) && -+ (bp->flags & B44_FLAG_FULL_DUPLEX)) { -+ status_changed = 1; -+ bp->flags &= ~B44_FLAG_FULL_DUPLEX; -+ } else if ((phydev->duplex == DUPLEX_FULL) && -+ !(bp->flags & B44_FLAG_FULL_DUPLEX)) { -+ status_changed = 1; -+ bp->flags |= B44_FLAG_FULL_DUPLEX; -+ } -+ } -+ -+ if (status_changed) { -+ b44_check_phy(bp); -+ phy_print_status(phydev); -+ } -+} -+ -+static int b44_register_phy_one(struct b44 *bp) -+{ -+ struct mii_bus *mii_bus; -+ struct ssb_device *sdev = bp->sdev; -+ struct phy_device *phydev; -+ char bus_id[MII_BUS_ID_SIZE + 3]; -+ int err; -+ -+ mii_bus = mdiobus_alloc(); -+ if (!mii_bus) { -+ dev_err(sdev->dev, "mdiobus_alloc() failed\n"); -+ err = -ENOMEM; -+ goto err_out; -+ } -+ -+ mii_bus->priv = bp; -+ mii_bus->read = b44_mdio_read_phylib; -+ mii_bus->write = b44_mdio_write_phylib; -+ mii_bus->name = "b44_eth_mii"; -+ mii_bus->parent = sdev->dev; -+ mii_bus->phy_mask = ~(1 << bp->phy_addr); -+ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%x", instance); -+ mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); -+ if (!mii_bus->irq) { -+ dev_err(sdev->dev, "mii_bus irq allocation failed\n"); -+ err = -ENOMEM; -+ goto err_out_mdiobus; -+ } -+ -+ memset(mii_bus->irq, PHY_POLL, sizeof(int) * PHY_MAX_ADDR); -+ -+ bp->mii_bus = mii_bus; -+ -+ err = mdiobus_register(mii_bus); -+ if (err) { -+ dev_err(sdev->dev, "failed to register MII bus\n"); -+ goto err_out_mdiobus_irq; -+ } -+ -+ snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id, bp->phy_addr); -+ -+ phydev = phy_connect(bp->dev, bus_id, &b44_adjust_link, -+ PHY_INTERFACE_MODE_MII); -+ if (IS_ERR(phydev)) { -+ dev_err(sdev->dev, "could not attach PHY at %i\n", -+ bp->phy_addr); -+ err = PTR_ERR(phydev); -+ goto err_out_mdiobus_unregister; -+ } -+ -+ /* mask with MAC supported features */ -+ phydev->supported &= (SUPPORTED_100baseT_Half | -+ SUPPORTED_100baseT_Full | -+ SUPPORTED_Autoneg | -+ SUPPORTED_MII); -+ phydev->advertising = phydev->supported; -+ -+ bp->phydev = phydev; -+ bp->old_link = 0; -+ bp->phy_addr = phydev->addr; -+ -+ dev_info(sdev->dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n", -+ phydev->drv->name, dev_name(&phydev->dev)); -+ -+ return 0; -+ -+err_out_mdiobus_unregister: -+ mdiobus_unregister(mii_bus); -+ -+err_out_mdiobus_irq: -+ kfree(mii_bus->irq); -+ -+err_out_mdiobus: -+ mdiobus_free(mii_bus); -+ -+err_out: -+ return err; -+} -+ -+static void b44_unregister_phy_one(struct b44 *bp) -+{ -+ struct mii_bus *mii_bus = bp->mii_bus; -+ -+ phy_disconnect(bp->phydev); -+ mdiobus_unregister(mii_bus); -+ kfree(mii_bus->irq); -+ mdiobus_free(mii_bus); -+} -+ - static int b44_init_one(struct ssb_device *sdev, - const struct ssb_device_id *ent) - { -@@ -2246,10 +2413,20 @@ static int b44_init_one(struct ssb_devic - if (b44_phy_reset(bp) < 0) - bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY; - -+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) { -+ err = b44_register_phy_one(bp); -+ if (err) { -+ dev_err(sdev->dev, "Cannot register PHY, aborting\n"); -+ goto err_out_unregister_netdev; -+ } -+ } -+ - netdev_info(dev, "%s %pM\n", DRV_DESCRIPTION, dev->dev_addr); - - return 0; - -+err_out_unregister_netdev: -+ unregister_netdev(dev); - err_out_powerdown: - ssb_bus_may_powerdown(sdev->bus); - -@@ -2263,8 +2440,11 @@ out: - static void b44_remove_one(struct ssb_device *sdev) - { - struct net_device *dev = ssb_get_drvdata(sdev); -+ struct b44 *bp = netdev_priv(dev); - - unregister_netdev(dev); -+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) -+ b44_unregister_phy_one(bp); - ssb_device_disable(sdev, 0); - ssb_bus_may_powerdown(sdev->bus); - free_netdev(dev); ---- a/drivers/net/ethernet/broadcom/b44.h -+++ b/drivers/net/ethernet/broadcom/b44.h -@@ -397,6 +397,9 @@ struct b44 { - u32 tx_pending; - u8 phy_addr; - u8 force_copybreak; -+ struct phy_device *phydev; -+ struct mii_bus *mii_bus; -+ int old_link; - struct mii_if_info mii_if; - }; - -- cgit v1.2.3