From c3d3111831d49d1ab37d90bbe6a61f1b2263721d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Fri, 16 Sep 2016 11:48:22 +0200 Subject: brcmfmac43430-firmware: remove package and switch to linux-firmware MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now that the firmware for BCM43430 has been submitted to linux-firmware use it and remove RPiDistro package. Signed-off-by: Álvaro Fernández Rojas --- .../lib/firmware/brcm/brcmfmac43430-sdio.txt | 66 ++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt (limited to 'target/linux/brcm2708') diff --git a/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt b/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt new file mode 100644 index 0000000000..ea4f648a18 --- /dev/null +++ b/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt @@ -0,0 +1,66 @@ +# NVRAM file for BCM943430WLPTH +# 2.4 GHz, 20 MHz BW mode + +# The following parameter values are just placeholders, need to be updated. +manfid=0x2d0 +prodid=0x0727 +vendid=0x14e4 +devid=0x43e2 +boardtype=0x0727 +boardrev=0x1101 +boardnum=22 +macaddr=00:90:4c:c5:12:38 +sromrev=11 +boardflags=0x00404201 +boardflags3=0x08000000 +xtalfreq=37400 +nocrc=1 +ag0=255 +aa2g=1 +ccode=ALL + +pa0itssit=0x20 +extpagain2g=0 +#PA parameters for 2.4GHz, measured at CHIP OUTPUT +pa2ga0=-168,7161,-820 +AvVmid_c0=0x0,0xc8 +cckpwroffset0=5 + +# PPR params +maxp2ga0=84 +txpwrbckof=6 +cckbw202gpo=0 +legofdmbw202gpo=0x66111111 +mcsbw202gpo=0x77711111 +propbw202gpo=0xdd + +# OFDM IIR : +ofdmdigfilttype=18 +ofdmdigfilttypebe=18 +# PAPD mode: +papdmode=1 +papdvalidtest=1 +pacalidx2g=42 +papdepsoffset=-22 +papdendidx=58 + +# LTECX flags +ltecxmux=0 +ltecxpadnum=0x0102 +ltecxfnsel=0x44 +ltecxgcigpio=0x01 + +il0macaddr=00:90:4c:c5:12:38 +wl0id=0x431b + +deadman_to=0xffffffff +# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG +muxenab=0x1 +# CLDO PWM voltage settings - 0x4 - 1.1 volt +#cldo_pwm=0x4 + +#VCO freq 326.4MHz +spurconfig=0x3 + +edonthd20l=-75 +edoffthd20ul=-80 -- cgit v1.2.3