From 2b1c6b21b5e6c82ebb55d7fb7df90e60e88cbb14 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Sat, 10 Sep 2016 14:54:26 +0200 Subject: brcm2708: update linux 4.4 patches to latest version MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Also adds support for Raspberry Pi Compute Module 3 (untested). Signed-off-by: Álvaro Fernández Rojas --- ...cm2835-add-additional-defines-for-DMA-reg.patch | 94 ---------------------- 1 file changed, 94 deletions(-) delete mode 100644 target/linux/brcm2708/patches-4.4/0395-dmaengine-bcm2835-add-additional-defines-for-DMA-reg.patch (limited to 'target/linux/brcm2708/patches-4.4/0395-dmaengine-bcm2835-add-additional-defines-for-DMA-reg.patch') diff --git a/target/linux/brcm2708/patches-4.4/0395-dmaengine-bcm2835-add-additional-defines-for-DMA-reg.patch b/target/linux/brcm2708/patches-4.4/0395-dmaengine-bcm2835-add-additional-defines-for-DMA-reg.patch deleted file mode 100644 index f2cc0e37b6..0000000000 --- a/target/linux/brcm2708/patches-4.4/0395-dmaengine-bcm2835-add-additional-defines-for-DMA-reg.patch +++ /dev/null @@ -1,94 +0,0 @@ -From b1f4d42406261ed1ddffbbf0582ebbfaf6c0a73b Mon Sep 17 00:00:00 2001 -From: Martin Sperl -Date: Wed, 16 Mar 2016 12:24:57 -0700 -Subject: [PATCH 395/423] dmaengine: bcm2835: add additional defines for - DMA-registers - -Add additional defines describing the DMA registers -as well as adding some more documentation to those registers. - -Signed-off-by: Martin Sperl -Reviewed-by: Eric Anholt -Signed-off-by: Eric Anholt -Signed-off-by: Vinod Koul ---- - drivers/dma/bcm2835-dma.c | 57 ++++++++++++++++++++++++++++++++++++++++------- - 1 file changed, 49 insertions(+), 8 deletions(-) - ---- a/drivers/dma/bcm2835-dma.c -+++ b/drivers/dma/bcm2835-dma.c -@@ -97,26 +97,67 @@ struct bcm2835_desc { - - #define BCM2835_DMA_CS 0x00 - #define BCM2835_DMA_ADDR 0x04 -+#define BCM2835_DMA_TI 0x08 - #define BCM2835_DMA_SOURCE_AD 0x0c - #define BCM2835_DMA_DEST_AD 0x10 --#define BCM2835_DMA_NEXTCB 0x1C -+#define BCM2835_DMA_LEN 0x14 -+#define BCM2835_DMA_STRIDE 0x18 -+#define BCM2835_DMA_NEXTCB 0x1c -+#define BCM2835_DMA_DEBUG 0x20 - - /* DMA CS Control and Status bits */ --#define BCM2835_DMA_ACTIVE BIT(0) --#define BCM2835_DMA_INT BIT(2) -+#define BCM2835_DMA_ACTIVE BIT(0) /* activate the DMA */ -+#define BCM2835_DMA_END BIT(1) /* current CB has ended */ -+#define BCM2835_DMA_INT BIT(2) /* interrupt status */ -+#define BCM2835_DMA_DREQ BIT(3) /* DREQ state */ - #define BCM2835_DMA_ISPAUSED BIT(4) /* Pause requested or not active */ - #define BCM2835_DMA_ISHELD BIT(5) /* Is held by DREQ flow control */ --#define BCM2835_DMA_ERR BIT(8) -+#define BCM2835_DMA_WAITING_FOR_WRITES BIT(6) /* waiting for last -+ * AXI-write to ack -+ */ -+#define BCM2835_DMA_ERR BIT(8) -+#define BCM2835_DMA_PRIORITY(x) ((x & 15) << 16) /* AXI priority */ -+#define BCM2835_DMA_PANIC_PRIORITY(x) ((x & 15) << 20) /* panic priority */ -+/* current value of TI.BCM2835_DMA_WAIT_RESP */ -+#define BCM2835_DMA_WAIT_FOR_WRITES BIT(28) -+#define BCM2835_DMA_DIS_DEBUG BIT(29) /* disable debug pause signal */ - #define BCM2835_DMA_ABORT BIT(30) /* Stop current CB, go to next, WO */ - #define BCM2835_DMA_RESET BIT(31) /* WO, self clearing */ - -+/* Transfer information bits - also bcm2835_cb.info field */ - #define BCM2835_DMA_INT_EN BIT(0) -+#define BCM2835_DMA_TDMODE BIT(1) /* 2D-Mode */ -+#define BCM2835_DMA_WAIT_RESP BIT(3) /* wait for AXI-write to be acked */ - #define BCM2835_DMA_D_INC BIT(4) --#define BCM2835_DMA_D_DREQ BIT(6) -+#define BCM2835_DMA_D_WIDTH BIT(5) /* 128bit writes if set */ -+#define BCM2835_DMA_D_DREQ BIT(6) /* enable DREQ for destination */ -+#define BCM2835_DMA_D_IGNORE BIT(7) /* ignore destination writes */ - #define BCM2835_DMA_S_INC BIT(8) --#define BCM2835_DMA_S_DREQ BIT(10) -+#define BCM2835_DMA_S_WIDTH BIT(9) /* 128bit writes if set */ -+#define BCM2835_DMA_S_DREQ BIT(10) /* enable SREQ for source */ -+#define BCM2835_DMA_S_IGNORE BIT(11) /* ignore source reads - read 0 */ -+#define BCM2835_DMA_BURST_LENGTH(x) ((x & 15) << 12) -+#define BCM2835_DMA_PER_MAP(x) ((x & 31) << 16) /* REQ source */ -+#define BCM2835_DMA_WAIT(x) ((x & 31) << 21) /* add DMA-wait cycles */ -+#define BCM2835_DMA_NO_WIDE_BURSTS BIT(26) /* no 2 beat write bursts */ - --#define BCM2835_DMA_PER_MAP(x) ((x) << 16) -+/* debug register bits */ -+#define BCM2835_DMA_DEBUG_LAST_NOT_SET_ERR BIT(0) -+#define BCM2835_DMA_DEBUG_FIFO_ERR BIT(1) -+#define BCM2835_DMA_DEBUG_READ_ERR BIT(2) -+#define BCM2835_DMA_DEBUG_OUTSTANDING_WRITES_SHIFT 4 -+#define BCM2835_DMA_DEBUG_OUTSTANDING_WRITES_BITS 4 -+#define BCM2835_DMA_DEBUG_ID_SHIFT 16 -+#define BCM2835_DMA_DEBUG_ID_BITS 9 -+#define BCM2835_DMA_DEBUG_STATE_SHIFT 16 -+#define BCM2835_DMA_DEBUG_STATE_BITS 9 -+#define BCM2835_DMA_DEBUG_VERSION_SHIFT 25 -+#define BCM2835_DMA_DEBUG_VERSION_BITS 3 -+#define BCM2835_DMA_DEBUG_LITE BIT(28) -+ -+/* shared registers for all dma channels */ -+#define BCM2835_DMA_INT_STATUS 0xfe0 -+#define BCM2835_DMA_ENABLE 0xff0 - - #define BCM2835_DMA_DATA_TYPE_S8 1 - #define BCM2835_DMA_DATA_TYPE_S16 2 -- cgit v1.2.3