From 011f2c26f1b62e309f2eac6a3101bfe0a3c76c7e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Fri, 2 Dec 2016 11:50:26 +0100 Subject: brcm2708: update linux 4.4 patches to latest version MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas --- ...cm2835-add-additional-defines-for-DMA-reg.patch | 93 ++++++++++++++++++++++ 1 file changed, 93 insertions(+) create mode 100644 target/linux/brcm2708/patches-4.4/0393-dmaengine-bcm2835-add-additional-defines-for-DMA-reg.patch (limited to 'target/linux/brcm2708/patches-4.4/0393-dmaengine-bcm2835-add-additional-defines-for-DMA-reg.patch') diff --git a/target/linux/brcm2708/patches-4.4/0393-dmaengine-bcm2835-add-additional-defines-for-DMA-reg.patch b/target/linux/brcm2708/patches-4.4/0393-dmaengine-bcm2835-add-additional-defines-for-DMA-reg.patch new file mode 100644 index 0000000000..1a3c44e2ff --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0393-dmaengine-bcm2835-add-additional-defines-for-DMA-reg.patch @@ -0,0 +1,93 @@ +From 2fe3ede60d3b88bb94ee1a100b5e771567db0962 Mon Sep 17 00:00:00 2001 +From: Martin Sperl +Date: Wed, 16 Mar 2016 12:24:57 -0700 +Subject: [PATCH] dmaengine: bcm2835: add additional defines for DMA-registers + +Add additional defines describing the DMA registers +as well as adding some more documentation to those registers. + +Signed-off-by: Martin Sperl +Reviewed-by: Eric Anholt +Signed-off-by: Eric Anholt +Signed-off-by: Vinod Koul +--- + drivers/dma/bcm2835-dma.c | 57 ++++++++++++++++++++++++++++++++++++++++------- + 1 file changed, 49 insertions(+), 8 deletions(-) + +--- a/drivers/dma/bcm2835-dma.c ++++ b/drivers/dma/bcm2835-dma.c +@@ -97,26 +97,67 @@ struct bcm2835_desc { + + #define BCM2835_DMA_CS 0x00 + #define BCM2835_DMA_ADDR 0x04 ++#define BCM2835_DMA_TI 0x08 + #define BCM2835_DMA_SOURCE_AD 0x0c + #define BCM2835_DMA_DEST_AD 0x10 +-#define BCM2835_DMA_NEXTCB 0x1C ++#define BCM2835_DMA_LEN 0x14 ++#define BCM2835_DMA_STRIDE 0x18 ++#define BCM2835_DMA_NEXTCB 0x1c ++#define BCM2835_DMA_DEBUG 0x20 + + /* DMA CS Control and Status bits */ +-#define BCM2835_DMA_ACTIVE BIT(0) +-#define BCM2835_DMA_INT BIT(2) ++#define BCM2835_DMA_ACTIVE BIT(0) /* activate the DMA */ ++#define BCM2835_DMA_END BIT(1) /* current CB has ended */ ++#define BCM2835_DMA_INT BIT(2) /* interrupt status */ ++#define BCM2835_DMA_DREQ BIT(3) /* DREQ state */ + #define BCM2835_DMA_ISPAUSED BIT(4) /* Pause requested or not active */ + #define BCM2835_DMA_ISHELD BIT(5) /* Is held by DREQ flow control */ +-#define BCM2835_DMA_ERR BIT(8) ++#define BCM2835_DMA_WAITING_FOR_WRITES BIT(6) /* waiting for last ++ * AXI-write to ack ++ */ ++#define BCM2835_DMA_ERR BIT(8) ++#define BCM2835_DMA_PRIORITY(x) ((x & 15) << 16) /* AXI priority */ ++#define BCM2835_DMA_PANIC_PRIORITY(x) ((x & 15) << 20) /* panic priority */ ++/* current value of TI.BCM2835_DMA_WAIT_RESP */ ++#define BCM2835_DMA_WAIT_FOR_WRITES BIT(28) ++#define BCM2835_DMA_DIS_DEBUG BIT(29) /* disable debug pause signal */ + #define BCM2835_DMA_ABORT BIT(30) /* Stop current CB, go to next, WO */ + #define BCM2835_DMA_RESET BIT(31) /* WO, self clearing */ + ++/* Transfer information bits - also bcm2835_cb.info field */ + #define BCM2835_DMA_INT_EN BIT(0) ++#define BCM2835_DMA_TDMODE BIT(1) /* 2D-Mode */ ++#define BCM2835_DMA_WAIT_RESP BIT(3) /* wait for AXI-write to be acked */ + #define BCM2835_DMA_D_INC BIT(4) +-#define BCM2835_DMA_D_DREQ BIT(6) ++#define BCM2835_DMA_D_WIDTH BIT(5) /* 128bit writes if set */ ++#define BCM2835_DMA_D_DREQ BIT(6) /* enable DREQ for destination */ ++#define BCM2835_DMA_D_IGNORE BIT(7) /* ignore destination writes */ + #define BCM2835_DMA_S_INC BIT(8) +-#define BCM2835_DMA_S_DREQ BIT(10) ++#define BCM2835_DMA_S_WIDTH BIT(9) /* 128bit writes if set */ ++#define BCM2835_DMA_S_DREQ BIT(10) /* enable SREQ for source */ ++#define BCM2835_DMA_S_IGNORE BIT(11) /* ignore source reads - read 0 */ ++#define BCM2835_DMA_BURST_LENGTH(x) ((x & 15) << 12) ++#define BCM2835_DMA_PER_MAP(x) ((x & 31) << 16) /* REQ source */ ++#define BCM2835_DMA_WAIT(x) ((x & 31) << 21) /* add DMA-wait cycles */ ++#define BCM2835_DMA_NO_WIDE_BURSTS BIT(26) /* no 2 beat write bursts */ + +-#define BCM2835_DMA_PER_MAP(x) ((x) << 16) ++/* debug register bits */ ++#define BCM2835_DMA_DEBUG_LAST_NOT_SET_ERR BIT(0) ++#define BCM2835_DMA_DEBUG_FIFO_ERR BIT(1) ++#define BCM2835_DMA_DEBUG_READ_ERR BIT(2) ++#define BCM2835_DMA_DEBUG_OUTSTANDING_WRITES_SHIFT 4 ++#define BCM2835_DMA_DEBUG_OUTSTANDING_WRITES_BITS 4 ++#define BCM2835_DMA_DEBUG_ID_SHIFT 16 ++#define BCM2835_DMA_DEBUG_ID_BITS 9 ++#define BCM2835_DMA_DEBUG_STATE_SHIFT 16 ++#define BCM2835_DMA_DEBUG_STATE_BITS 9 ++#define BCM2835_DMA_DEBUG_VERSION_SHIFT 25 ++#define BCM2835_DMA_DEBUG_VERSION_BITS 3 ++#define BCM2835_DMA_DEBUG_LITE BIT(28) ++ ++/* shared registers for all dma channels */ ++#define BCM2835_DMA_INT_STATUS 0xfe0 ++#define BCM2835_DMA_ENABLE 0xff0 + + #define BCM2835_DMA_DATA_TYPE_S8 1 + #define BCM2835_DMA_DATA_TYPE_S16 2 -- cgit v1.2.3