From f5919b65d4c671fd5083838c7a445f319f9a13c8 Mon Sep 17 00:00:00 2001 From: Stijn Tintel Date: Sat, 10 Nov 2018 13:03:18 +0200 Subject: brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel --- ...9-BCM270X_DT-Add-sdio_overclock-parameter.patch | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 target/linux/brcm2708/patches-4.14/950-0279-BCM270X_DT-Add-sdio_overclock-parameter.patch (limited to 'target/linux/brcm2708/patches-4.14/950-0279-BCM270X_DT-Add-sdio_overclock-parameter.patch') diff --git a/target/linux/brcm2708/patches-4.14/950-0279-BCM270X_DT-Add-sdio_overclock-parameter.patch b/target/linux/brcm2708/patches-4.14/950-0279-BCM270X_DT-Add-sdio_overclock-parameter.patch new file mode 100644 index 0000000000..fe1a31ace1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.14/950-0279-BCM270X_DT-Add-sdio_overclock-parameter.patch @@ -0,0 +1,38 @@ +From 3c015b0f686824f1b0815cc028665304ab0981d6 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 24 Apr 2018 14:28:33 +0100 +Subject: [PATCH 279/454] BCM270X_DT: Add sdio_overclock parameter + +The Arasan MMC interface is used on some RPis to drive the SDIO +link to the WiFi controller. The downstream bcm2835-mmc driver, +like the bcm2835-sdhost driver, can be over- (or under-) clocked. +Add a common parameter - sdio_overclock - to all DTBs to control it. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708-rpi.dtsi | 1 + + arch/arm/boot/dts/overlays/README | 3 +++ + 2 files changed, 4 insertions(+) + +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -115,6 +115,7 @@ + sd_force_pio = <&sdhost>,"brcm,force-pio?"; + sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; + sd_debug = <&sdhost>,"brcm,debug"; ++ sdio_overclock = <&mmc>,"brcm,overclock-50:0"; + axiperf = <&axiperf>,"status"; + }; + }; +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -139,6 +139,9 @@ Params: + + sd_debug Enable debug output from SD driver (default off) + ++ sdio_overclock Clock (in MHz) to use when the MMC framework ++ requests 50MHz for the SDIO/WiFi interface. ++ + tx_lpi_timer Set the delay in microseconds between going idle + and entering the low power state (default 600). + Requires EEE to be enabled - see "eee". -- cgit v1.2.3