From 208ab54e3e9516dd9fcf1ce197950044e0bebd90 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 17 Jul 2015 12:48:39 +0000 Subject: brcm2708: add linux 4.1 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Álvaro Fernández Rojas SVN-Revision: 46399 --- ...09-mailbox-Enable-BCM2835-mailbox-support.patch | 274 +++++++++++++++++++++ 1 file changed, 274 insertions(+) create mode 100644 target/linux/brcm2708/patches-4.1/0109-mailbox-Enable-BCM2835-mailbox-support.patch (limited to 'target/linux/brcm2708/patches-4.1/0109-mailbox-Enable-BCM2835-mailbox-support.patch') diff --git a/target/linux/brcm2708/patches-4.1/0109-mailbox-Enable-BCM2835-mailbox-support.patch b/target/linux/brcm2708/patches-4.1/0109-mailbox-Enable-BCM2835-mailbox-support.patch new file mode 100644 index 0000000000..15167d43b6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.1/0109-mailbox-Enable-BCM2835-mailbox-support.patch @@ -0,0 +1,274 @@ +From a097ef23c580bdcad619cca1deabd71eb6237984 Mon Sep 17 00:00:00 2001 +From: Lubomir Rintel +Date: Tue, 5 May 2015 13:27:45 -0700 +Subject: [PATCH 109/121] mailbox: Enable BCM2835 mailbox support + +This mailbox driver provides a single mailbox channel to write 32-bit +values to the VPU and get a 32-bit response. The Raspberry Pi +firmware uses this mailbox channel to implement firmware calls, while +Roku 2 (despite being derived from the same firmware tree) doesn't. + +The driver was originally submitted by Lubomir, based on the +out-of-tree 2708 mailbox driver. Eric Anholt fixed it up for +upstreaming, with the major functional change being that it now has no +notion of multiple channels (since that is a firmware-dependent +concept) and instead the raspberrypi-firmware driver will do that +bit-twiddling in its own messages. +[Jassi: made the 'mbox_chan_ops' struct as const and removed a redundant +variable] + +Signed-off-by: Lubomir Rintel +Signed-off-by: Craig McGeachie +Signed-off-by: Eric Anholt +Acked-by: Stephen Warren +Signed-off-by: Jassi Brar +--- + drivers/mailbox/Kconfig | 9 ++ + drivers/mailbox/Makefile | 2 + + drivers/mailbox/bcm2835-mailbox.c | 216 ++++++++++++++++++++++++++++++++++++++ + 3 files changed, 227 insertions(+) + create mode 100644 drivers/mailbox/bcm2835-mailbox.c + +--- a/drivers/mailbox/Kconfig ++++ b/drivers/mailbox/Kconfig +@@ -66,4 +66,13 @@ config ALTERA_MBOX + An implementation of the Altera Mailbox soft core. It is used + to send message between processors. Say Y here if you want to use the + Altera mailbox support. ++ ++config BCM2835_MBOX ++ tristate "BCM2835 Mailbox" ++ depends on ARCH_BCM2835 ++ help ++ An implementation of the BCM2385 Mailbox. It is used to invoke ++ the services of the Videocore. Say Y here if you want to use the ++ BCM2835 Mailbox. ++ + endif +--- a/drivers/mailbox/Makefile ++++ b/drivers/mailbox/Makefile +@@ -13,3 +13,5 @@ obj-$(CONFIG_OMAP2PLUS_MBOX) += omap-mai + obj-$(CONFIG_PCC) += pcc.o + + obj-$(CONFIG_ALTERA_MBOX) += mailbox-altera.o ++ ++obj-$(CONFIG_BCM2835_MBOX) += bcm2835-mailbox.o +--- /dev/null ++++ b/drivers/mailbox/bcm2835-mailbox.c +@@ -0,0 +1,216 @@ ++/* ++ * Copyright (C) 2010,2015 Broadcom ++ * Copyright (C) 2013-2014 Lubomir Rintel ++ * Copyright (C) 2013 Craig McGeachie ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This device provides a mechanism for writing to the mailboxes, ++ * that are shared between the ARM and the VideoCore processor ++ * ++ * Parts of the driver are based on: ++ * - arch/arm/mach-bcm2708/vcio.c file written by Gray Girling that was ++ * obtained from branch "rpi-3.6.y" of git://github.com/raspberrypi/ ++ * linux.git ++ * - drivers/mailbox/bcm2835-ipc.c by Lubomir Rintel at ++ * https://github.com/hackerspace/rpi-linux/blob/lr-raspberry-pi/drivers/ ++ * mailbox/bcm2835-ipc.c ++ * - documentation available on the following web site: ++ * https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* Mailboxes */ ++#define ARM_0_MAIL0 0x00 ++#define ARM_0_MAIL1 0x20 ++ ++/* ++ * Mailbox registers. We basically only support mailbox 0 & 1. We ++ * deliver to the VC in mailbox 1, it delivers to us in mailbox 0. See ++ * BCM2835-ARM-Peripherals.pdf section 1.3 for an explanation about ++ * the placement of memory barriers. ++ */ ++#define MAIL0_RD (ARM_0_MAIL0 + 0x00) ++#define MAIL0_POL (ARM_0_MAIL0 + 0x10) ++#define MAIL0_STA (ARM_0_MAIL0 + 0x18) ++#define MAIL0_CNF (ARM_0_MAIL0 + 0x1C) ++#define MAIL1_WRT (ARM_0_MAIL1 + 0x00) ++ ++/* Status register: FIFO state. */ ++#define ARM_MS_FULL BIT(31) ++#define ARM_MS_EMPTY BIT(30) ++ ++/* Configuration register: Enable interrupts. */ ++#define ARM_MC_IHAVEDATAIRQEN BIT(0) ++ ++struct bcm2835_mbox { ++ void __iomem *regs; ++ spinlock_t lock; ++ struct mbox_controller controller; ++}; ++ ++static struct bcm2835_mbox *bcm2835_link_mbox(struct mbox_chan *link) ++{ ++ return container_of(link->mbox, struct bcm2835_mbox, controller); ++} ++ ++static irqreturn_t bcm2835_mbox_irq(int irq, void *dev_id) ++{ ++ struct bcm2835_mbox *mbox = dev_id; ++ struct device *dev = mbox->controller.dev; ++ struct mbox_chan *link = &mbox->controller.chans[0]; ++ ++ while (!(readl(mbox->regs + MAIL0_STA) & ARM_MS_EMPTY)) { ++ u32 msg = readl(mbox->regs + MAIL0_RD); ++ dev_dbg(dev, "Reply 0x%08X\n", msg); ++ mbox_chan_received_data(link, &msg); ++ } ++ return IRQ_HANDLED; ++} ++ ++static int bcm2835_send_data(struct mbox_chan *link, void *data) ++{ ++ struct bcm2835_mbox *mbox = bcm2835_link_mbox(link); ++ u32 msg = *(u32 *)data; ++ ++ spin_lock(&mbox->lock); ++ writel(msg, mbox->regs + MAIL1_WRT); ++ dev_dbg(mbox->controller.dev, "Request 0x%08X\n", msg); ++ spin_unlock(&mbox->lock); ++ return 0; ++} ++ ++static int bcm2835_startup(struct mbox_chan *link) ++{ ++ struct bcm2835_mbox *mbox = bcm2835_link_mbox(link); ++ ++ /* Enable the interrupt on data reception */ ++ writel(ARM_MC_IHAVEDATAIRQEN, mbox->regs + MAIL0_CNF); ++ ++ return 0; ++} ++ ++static void bcm2835_shutdown(struct mbox_chan *link) ++{ ++ struct bcm2835_mbox *mbox = bcm2835_link_mbox(link); ++ ++ writel(0, mbox->regs + MAIL0_CNF); ++} ++ ++static bool bcm2835_last_tx_done(struct mbox_chan *link) ++{ ++ struct bcm2835_mbox *mbox = bcm2835_link_mbox(link); ++ bool ret; ++ ++ spin_lock(&mbox->lock); ++ ret = !(readl(mbox->regs + MAIL0_STA) & ARM_MS_FULL); ++ spin_unlock(&mbox->lock); ++ return ret; ++} ++ ++static const struct mbox_chan_ops bcm2835_mbox_chan_ops = { ++ .send_data = bcm2835_send_data, ++ .startup = bcm2835_startup, ++ .shutdown = bcm2835_shutdown, ++ .last_tx_done = bcm2835_last_tx_done ++}; ++ ++static struct mbox_chan *bcm2835_mbox_index_xlate(struct mbox_controller *mbox, ++ const struct of_phandle_args *sp) ++{ ++ if (sp->args_count != 0) ++ return NULL; ++ ++ return &mbox->chans[0]; ++} ++ ++static int bcm2835_mbox_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ int ret = 0; ++ struct resource *iomem; ++ struct bcm2835_mbox *mbox; ++ ++ mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL); ++ if (mbox == NULL) ++ return -ENOMEM; ++ spin_lock_init(&mbox->lock); ++ ++ ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0), ++ bcm2835_mbox_irq, 0, dev_name(dev), mbox); ++ if (ret) { ++ dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n", ++ ret); ++ return -ENODEV; ++ } ++ ++ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ mbox->regs = devm_ioremap_resource(&pdev->dev, iomem); ++ if (IS_ERR(mbox->regs)) { ++ ret = PTR_ERR(mbox->regs); ++ dev_err(&pdev->dev, "Failed to remap mailbox regs: %d\n", ret); ++ return ret; ++ } ++ ++ mbox->controller.txdone_poll = true; ++ mbox->controller.txpoll_period = 5; ++ mbox->controller.ops = &bcm2835_mbox_chan_ops; ++ mbox->controller.of_xlate = &bcm2835_mbox_index_xlate; ++ mbox->controller.dev = dev; ++ mbox->controller.num_chans = 1; ++ mbox->controller.chans = devm_kzalloc(dev, ++ sizeof(*mbox->controller.chans), GFP_KERNEL); ++ if (!mbox->controller.chans) ++ return -ENOMEM; ++ ++ ret = mbox_controller_register(&mbox->controller); ++ if (ret) ++ return ret; ++ ++ platform_set_drvdata(pdev, mbox); ++ dev_info(dev, "mailbox enabled\n"); ++ ++ return ret; ++} ++ ++static int bcm2835_mbox_remove(struct platform_device *pdev) ++{ ++ struct bcm2835_mbox *mbox = platform_get_drvdata(pdev); ++ mbox_controller_unregister(&mbox->controller); ++ return 0; ++} ++ ++static const struct of_device_id bcm2835_mbox_of_match[] = { ++ { .compatible = "brcm,bcm2835-mbox", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, bcm2835_mbox_of_match); ++ ++static struct platform_driver bcm2835_mbox_driver = { ++ .driver = { ++ .name = "bcm2835-mbox", ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_mbox_of_match, ++ }, ++ .probe = bcm2835_mbox_probe, ++ .remove = bcm2835_mbox_remove, ++}; ++module_platform_driver(bcm2835_mbox_driver); ++ ++MODULE_AUTHOR("Lubomir Rintel "); ++MODULE_DESCRIPTION("BCM2835 mailbox IPC driver"); ++MODULE_LICENSE("GPL v2"); -- cgit v1.2.3