From 484609eeb06618dd2581f93ba57d0023a1f3adee Mon Sep 17 00:00:00 2001 From: Tim Yardley Date: Fri, 2 Mar 2007 18:17:40 +0000 Subject: commit profile support for base-files... patches still need to be done SVN-Revision: 6465 --- target/linux/brcm-2.4/base-files/bin/firstboot | 128 ------------------ .../brcm-2.4/base-files/default/bin/firstboot | 128 ++++++++++++++++++ .../linux/brcm-2.4/base-files/default/etc/diag.sh | 28 ++++ .../brcm-2.4/base-files/default/etc/init.d/done | 15 +++ .../base-files/default/etc/init.d/netconfig | 145 +++++++++++++++++++++ .../linux/brcm-2.4/base-files/default/etc/preinit | 73 +++++++++++ .../base-files/default/sbin/hotplug.failsafe | 4 + .../brcm-2.4/base-files/default/sbin/mount_root | 31 +++++ target/linux/brcm-2.4/base-files/etc/diag.sh | 28 ---- target/linux/brcm-2.4/base-files/etc/init.d/done | 15 --- .../linux/brcm-2.4/base-files/etc/init.d/netconfig | 145 --------------------- target/linux/brcm-2.4/base-files/etc/preinit | 73 ----------- .../brcm-2.4/base-files/sbin/hotplug.failsafe | 4 - target/linux/brcm-2.4/base-files/sbin/mount_root | 31 ----- 14 files changed, 424 insertions(+), 424 deletions(-) delete mode 100755 target/linux/brcm-2.4/base-files/bin/firstboot create mode 100755 target/linux/brcm-2.4/base-files/default/bin/firstboot create mode 100644 target/linux/brcm-2.4/base-files/default/etc/diag.sh create mode 100755 target/linux/brcm-2.4/base-files/default/etc/init.d/done create mode 100755 target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig create mode 100755 target/linux/brcm-2.4/base-files/default/etc/preinit create mode 100755 target/linux/brcm-2.4/base-files/default/sbin/hotplug.failsafe create mode 100755 target/linux/brcm-2.4/base-files/default/sbin/mount_root delete mode 100644 target/linux/brcm-2.4/base-files/etc/diag.sh delete mode 100755 target/linux/brcm-2.4/base-files/etc/init.d/done delete mode 100755 target/linux/brcm-2.4/base-files/etc/init.d/netconfig delete mode 100755 target/linux/brcm-2.4/base-files/etc/preinit delete mode 100755 target/linux/brcm-2.4/base-files/sbin/hotplug.failsafe delete mode 100755 target/linux/brcm-2.4/base-files/sbin/mount_root (limited to 'target/linux/brcm-2.4/base-files') diff --git a/target/linux/brcm-2.4/base-files/bin/firstboot b/target/linux/brcm-2.4/base-files/bin/firstboot deleted file mode 100755 index c3d9a64b87..0000000000 --- a/target/linux/brcm-2.4/base-files/bin/firstboot +++ /dev/null @@ -1,128 +0,0 @@ -#!/bin/sh -# $Id$ -. /etc/functions.sh - -partname="OpenWrt" -mtdpart="$(find_mtd_part $partname)" - -rom=$(awk '/squashfs/ {print $2}' /proc/mounts) -jffs=$(awk '/jffs2/ {print $2}' /proc/mounts) - -dupe() { # - cd $1 - echo -n "creating directories... " - { - cd $2 - find . -xdev -type d - echo "./dev ./jffs ./mnt ./proc ./tmp" - # xdev skips mounted directories - cd $1 - } | xargs mkdir -p - echo "done" - - echo -n "setting up symlinks... " - for file in $(cd $2; find . -xdev -type f;); do - case "$file" in - ./rom/note) ;; #nothing - ./etc/config*|\ - ./usr/lib/ipkg/info/*) cp -af $2/$file $file;; - *) ln -sf /rom/${file#./*} $file;; - esac - done - for file in $(cd $2; find . -xdev -type l;); do - cp -af $2/${file#./*} $file - done - echo "done" -} - -pivot() { # - mount -o move /proc $1/proc && \ - pivot_root $1 $1$2 && { - mount -o move $2/dev /dev - mount -o move $2/tmp /tmp - mount -o move $2/jffs /jffs 2>&- - return 0 - } -} - -fopivot() { # - root=$1 - { - mount -t mini_fo -o base=/,sto=$1 $1 /mnt 2>&- && root=/mnt - } || { - [ "$3" = "1" ] && { - mount | grep "on $1 type" 2>&- 1>&- || mount -o bind $1 $1 - dupe $1 $rom - } - } - pivot $root $2 -} - -ramoverlay() { - mkdir -p /tmp/root - fopivot /tmp/root /rom 1 -} - -# invoked as an executable -[ "${0##*/}" = "firstboot" ] && { - - [ -z "$mtdpart" ] && { - echo "MTD partition not found." - exit 1 - } - - [ -z "$rom" ] && { - echo "You do not have a squashfs partition; aborting" - echo "(firstboot cannot be run on jffs2 based firmwares)" - exit 1 - } - - [ "$1" = "switch2jffs" ] && { - mtd erase "$partname" - - # try to avoid fs changing while copying - mount -o remount,ro none / 2>&- - - # copy ramoverlay to jffs2 - mount "$mtdpart" /rom/jffs -t jffs2 - echo -n "copying files ... " - cp -a /tmp/root/* /rom/jffs 2>&- - echo "done" - - # switch back to squashfs (temporarily) - # and park the ramdisk ontop of /tmp/root - pivot /rom /mnt - mount -o move /mnt /tmp/root - - # /jffs is the overlay - # /rom is the readonly - fopivot /jffs /rom - - # try to get rid of /tmp/root - # this will almost always fail - umount /tmp/root 2>&- - - # fs is clean - jffs2root --clean - exit 0 - } - - # script run manually - [ \! -z "$jffs" ] && { - echo "firstboot has already been run" - echo "jffs2 partition is mounted, only resetting files" - grep mini_fo /proc/filesystems >&- - [ $? != 0 ] && { - dupe $jffs $rom - exit 0 - } || { - rm -rf $jffs/* 2>&- - mount -o remount $jffs / 2>&- - exit 0 - } - } - - mtd erase "$partname" - mount "$mtdpart" /jffs -t jffs2 - fopivot /jffs /rom 1 -} diff --git a/target/linux/brcm-2.4/base-files/default/bin/firstboot b/target/linux/brcm-2.4/base-files/default/bin/firstboot new file mode 100755 index 0000000000..c3d9a64b87 --- /dev/null +++ b/target/linux/brcm-2.4/base-files/default/bin/firstboot @@ -0,0 +1,128 @@ +#!/bin/sh +# $Id$ +. /etc/functions.sh + +partname="OpenWrt" +mtdpart="$(find_mtd_part $partname)" + +rom=$(awk '/squashfs/ {print $2}' /proc/mounts) +jffs=$(awk '/jffs2/ {print $2}' /proc/mounts) + +dupe() { # + cd $1 + echo -n "creating directories... " + { + cd $2 + find . -xdev -type d + echo "./dev ./jffs ./mnt ./proc ./tmp" + # xdev skips mounted directories + cd $1 + } | xargs mkdir -p + echo "done" + + echo -n "setting up symlinks... " + for file in $(cd $2; find . -xdev -type f;); do + case "$file" in + ./rom/note) ;; #nothing + ./etc/config*|\ + ./usr/lib/ipkg/info/*) cp -af $2/$file $file;; + *) ln -sf /rom/${file#./*} $file;; + esac + done + for file in $(cd $2; find . -xdev -type l;); do + cp -af $2/${file#./*} $file + done + echo "done" +} + +pivot() { # + mount -o move /proc $1/proc && \ + pivot_root $1 $1$2 && { + mount -o move $2/dev /dev + mount -o move $2/tmp /tmp + mount -o move $2/jffs /jffs 2>&- + return 0 + } +} + +fopivot() { # + root=$1 + { + mount -t mini_fo -o base=/,sto=$1 $1 /mnt 2>&- && root=/mnt + } || { + [ "$3" = "1" ] && { + mount | grep "on $1 type" 2>&- 1>&- || mount -o bind $1 $1 + dupe $1 $rom + } + } + pivot $root $2 +} + +ramoverlay() { + mkdir -p /tmp/root + fopivot /tmp/root /rom 1 +} + +# invoked as an executable +[ "${0##*/}" = "firstboot" ] && { + + [ -z "$mtdpart" ] && { + echo "MTD partition not found." + exit 1 + } + + [ -z "$rom" ] && { + echo "You do not have a squashfs partition; aborting" + echo "(firstboot cannot be run on jffs2 based firmwares)" + exit 1 + } + + [ "$1" = "switch2jffs" ] && { + mtd erase "$partname" + + # try to avoid fs changing while copying + mount -o remount,ro none / 2>&- + + # copy ramoverlay to jffs2 + mount "$mtdpart" /rom/jffs -t jffs2 + echo -n "copying files ... " + cp -a /tmp/root/* /rom/jffs 2>&- + echo "done" + + # switch back to squashfs (temporarily) + # and park the ramdisk ontop of /tmp/root + pivot /rom /mnt + mount -o move /mnt /tmp/root + + # /jffs is the overlay + # /rom is the readonly + fopivot /jffs /rom + + # try to get rid of /tmp/root + # this will almost always fail + umount /tmp/root 2>&- + + # fs is clean + jffs2root --clean + exit 0 + } + + # script run manually + [ \! -z "$jffs" ] && { + echo "firstboot has already been run" + echo "jffs2 partition is mounted, only resetting files" + grep mini_fo /proc/filesystems >&- + [ $? != 0 ] && { + dupe $jffs $rom + exit 0 + } || { + rm -rf $jffs/* 2>&- + mount -o remount $jffs / 2>&- + exit 0 + } + } + + mtd erase "$partname" + mount "$mtdpart" /jffs -t jffs2 + fopivot /jffs /rom 1 +} diff --git a/target/linux/brcm-2.4/base-files/default/etc/diag.sh b/target/linux/brcm-2.4/base-files/default/etc/diag.sh new file mode 100644 index 0000000000..3b08554c64 --- /dev/null +++ b/target/linux/brcm-2.4/base-files/default/etc/diag.sh @@ -0,0 +1,28 @@ +#!/bin/sh +# Copyright (C) 2006 OpenWrt.org + +set_led() { + local led="$1" + local state="$2" + [ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1" +} + +set_state() { + case "$1" in + preinit) + set_led dmz 1 + set_led diag 1 + set_led power 0 + ;; + failsafe) + set_led diag f + set_led power f + set_led dmz f + ;; + done) + set_led dmz 0 + set_led diag 0 + set_led power 1 + ;; + esac +} diff --git a/target/linux/brcm-2.4/base-files/default/etc/init.d/done b/target/linux/brcm-2.4/base-files/default/etc/init.d/done new file mode 100755 index 0000000000..0640b61938 --- /dev/null +++ b/target/linux/brcm-2.4/base-files/default/etc/init.d/done @@ -0,0 +1,15 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2006 OpenWrt.org + +START=95 +boot() { + [ -d /tmp/root ] && { + lock /tmp/.switch2jffs + firstboot switch2jffs + lock -u /tmp/.switch2jffs + } + + # set leds to normal state + . /etc/diag.sh + set_state done +} diff --git a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig new file mode 100755 index 0000000000..4cc23d233b --- /dev/null +++ b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig @@ -0,0 +1,145 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2006 OpenWrt.org + +START=05 + +start() { + [ -e /etc/config/network ] && exit 0 + + mkdir -p /etc/config + + ( + if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then + # WGT634u + echo boardtype=wgt634u + else + strings /dev/mtdblock/3 + fi + ) | awk ' + function p(cfgname, name) { + if (c[name] != "") print " option " cfgname " \"" c[name] "\"" + } + + function macinc(mac, maca, i, result) { + split(mac, maca, ":") + for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i] + if (++maca[6] > 0xff) { + maca[5]++ + maca[6] = 0 + } + for (i = 1; i <= 6; i++) { + if (i != 1) result = result ":" + result = result sprintf("%02x", maca[i]) + } + return result + } + + BEGIN { + FS="=" + c["lan_ifname"]="eth0.0" + c["wan_ifname"]="eth0.1" + c["vlan0ports"]="1 2 3 4 5*" + c["vlan1ports"]="0 5" + getline < "/proc/diag/model" + model=$0 + for (i = 0; i < 6; i++) { + if (mac_check != "") mac_check = mac_check ":" + mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]" + } + } + + ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) { + nvram[$1] = $2 + } + + END { + if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) { + c["wan_ifname"] = "" + c["lan_ifname"] = "eth1" + } + if (model == "ASUS WL-500g") { + c["wan_ifname"] = "eth1" + c["lan_ifname"] = "eth0" + } + if (nvram["boardtype"] == "bcm94710r4") { + # Toshiba WRC-1000 + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + } + if (nvram["boardtype"] == "wgt634u") { + c["vlan0ports"] = "0 1 2 3 5*" + c["vlan1ports"] = "4 5" + } + if (nvram["boardtype"] == "0x0467") { + c["vlan0ports"] = "0 1 2 3 5*" + c["vlan1ports"] = "4 5" + } + if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) { + if (nvram["boardnum"] == "45") { + # WL-500gP + c["vlan0ports"] = "1 2 3 4 5*" + c["vlan1ports"] = "0 5" + } else { + # Generic BCM94704 + c["vlan0ports"] = "0 1 2 3 4 5u" + c["vlan1ports"] = "" + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + + # MAC addresses on 4704 tend to be screwed up. Add a workaround here + if (nvram["et0macaddr"] ~ mac_check) { + c["lan_macaddr"] = nvram["et0macaddr"] + c["wan_macaddr"] = macinc(c["lan_macaddr"]) + } + } + } + + # WAP54G + if ((nvram["boardnum"] == "2") || \ + (nvram["boardnum"] == "1024")) { + c["lan_ifname"]="eth0" + c["wan_ifname"]="" + } + + # ASUS WL-700gE + # These are actually same as defaults above. For some reason this script applies + # Generic BCM94704 settings instead so we revert to proper settings here. + # Hopefully someone will fix this properly soon. + if (model == "ASUS WL-700gE") { + c["lan_ifname"]="eth0.0" + c["wan_ifname"]="eth0.1" + c["vlan0ports"]="1 2 3 4 5*" + c["vlan1ports"]="0 5" + } + + print "#### VLAN configuration " + print "config switch eth0" + p("vlan0", "vlan0ports") + p("vlan1", "vlan1ports") + print "" + print "" + print "#### Loopback configuration" + print "config interface loopback" + print " option ifname \"lo\"" + print " option proto static" + print " option ipaddr 127.0.0.1" + print " option netmask 255.0.0.0" + print "" + print "" + print "#### LAN configuration" + print "config interface lan" + print " option type bridge" + p("ifname", "lan_ifname") + p("macaddr", "lan_macaddr") + print " option proto static" + print " option ipaddr 192.168.1.1" + print " option netmask 255.255.255.0" + print "" + print "" + print "#### WAN configuration" + print "config interface wan" + p("ifname", "wan_ifname") + p("macaddr", "wan_macaddr") + print " option proto dhcp" + }' > /etc/config/network +} diff --git a/target/linux/brcm-2.4/base-files/default/etc/preinit b/target/linux/brcm-2.4/base-files/default/etc/preinit new file mode 100755 index 0000000000..1c4e59f152 --- /dev/null +++ b/target/linux/brcm-2.4/base-files/default/etc/preinit @@ -0,0 +1,73 @@ +#!/bin/sh +# Copyright (C) 2006 OpenWrt.org + +. /etc/functions.sh +. /etc/diag.sh + +failsafe() { + lock /tmp/.failsafe + + echo "0 1 2 3 4 5u*" > /proc/switch/eth0/vlan/0/ports + + set_state failsafe + [ -x "/usr/sbin/nvram" ] && { + [ "$(nvram get boot_wait)" != "on" ] && { + nvram set boot_wait=on + nvram commit + } + } + + netmsg 192.168.1.255 "Entering Failsafe!" + telnetd -l /bin/login <> /dev/null 2>&1 + + ash --login +} + +export PATH=/bin:/sbin:/usr/bin:/usr/sbin +mount none /proc -t proc +size=$(awk '/Mem:/ {l=5242880;print((s=$2/2) /proc/sys/kernel/hotplug + +ifname=eth0 + +# hardware specific overrides +case "$(cat /proc/diag/model)" in + "Linksys WAP54G V1") ifname=eth1;; + "ASUS WL-HDD") ifname=eth1;; + "ASUS WL-300g") ifname=eth1;; + "ASUS (unknown, BCM4702)") ifname=eth1;; +esac + +insmod switch-core +insmod switch-robo || insmod switch-adm || rmmod switch-core + +ifconfig $ifname 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 up + +[ -d /proc/switch/eth0 ] && { + echo 1 > /proc/switch/eth0/reset + + # this would be easier if we blasted the message across all ports + # but we don't want packets leaking across interfaces + for port in $(seq 0 4); do { + echo "$port 5u*" > /proc/switch/eth0/vlan/0/ports + netmsg 192.168.1.255 "Press reset now, to enter Failsafe!" + }; done +} || netmsg 192.168.1.255 "Press reset now, to enter Failsafe!" + +sleep 2 + +eval ${FAILSAFE:+failsafe} + +lock -w /tmp/.failsafe +set_state preinit +echo /sbin/hotplug > /proc/sys/kernel/hotplug + +ifconfig $ifname 0.0.0.0 down + +mount_root +exec /sbin/init diff --git a/target/linux/brcm-2.4/base-files/default/sbin/hotplug.failsafe b/target/linux/brcm-2.4/base-files/default/sbin/hotplug.failsafe new file mode 100755 index 0000000000..0544339de8 --- /dev/null +++ b/target/linux/brcm-2.4/base-files/default/sbin/hotplug.failsafe @@ -0,0 +1,4 @@ +#!/bin/sh +case "$1" in + button) kill -USR1 1;; +esac diff --git a/target/linux/brcm-2.4/base-files/default/sbin/mount_root b/target/linux/brcm-2.4/base-files/default/sbin/mount_root new file mode 100755 index 0000000000..ffa6072c66 --- /dev/null +++ b/target/linux/brcm-2.4/base-files/default/sbin/mount_root @@ -0,0 +1,31 @@ +#!/bin/sh +# Copyright (C) 2006 OpenWrt.org + +is_dirty() { + grep Broadcom /proc/cpuinfo >&- || return 1 + OFFSET="$(($(hexdump -v /dev/mtdblock/1 -s 20 -n 2 -e '"%d"')-1))" + return $(hexdump -v /dev/mtdblock/1 -s $OFFSET -n 1 -e '"%d"') +} + +if [ "$1" != "failsafe" ]; then + mtd unlock linux + mount | grep jffs2 >&- + if [ $? = 0 ] ; then + mount -o remount,rw /dev/root / + else + . /bin/firstboot + is_dirty + [ $? != 0 ] && { + echo "switching to jffs2" + mount /dev/mtdblock/4 /jffs -t jffs2 + fopivot /jffs /rom + } || { + echo "jffs2 not ready yet; using ramdisk" + ramoverlay + } + fi +fi + +mkdir -p /dev/pts +mount none /dev/pts -t devpts 2>&- +grep sysfs /proc/filesystems >/dev/null && mount -t sysfs none /sys 2>&- diff --git a/target/linux/brcm-2.4/base-files/etc/diag.sh b/target/linux/brcm-2.4/base-files/etc/diag.sh deleted file mode 100644 index 3b08554c64..0000000000 --- a/target/linux/brcm-2.4/base-files/etc/diag.sh +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh -# Copyright (C) 2006 OpenWrt.org - -set_led() { - local led="$1" - local state="$2" - [ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1" -} - -set_state() { - case "$1" in - preinit) - set_led dmz 1 - set_led diag 1 - set_led power 0 - ;; - failsafe) - set_led diag f - set_led power f - set_led dmz f - ;; - done) - set_led dmz 0 - set_led diag 0 - set_led power 1 - ;; - esac -} diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/done b/target/linux/brcm-2.4/base-files/etc/init.d/done deleted file mode 100755 index 0640b61938..0000000000 --- a/target/linux/brcm-2.4/base-files/etc/init.d/done +++ /dev/null @@ -1,15 +0,0 @@ -#!/bin/sh /etc/rc.common -# Copyright (C) 2006 OpenWrt.org - -START=95 -boot() { - [ -d /tmp/root ] && { - lock /tmp/.switch2jffs - firstboot switch2jffs - lock -u /tmp/.switch2jffs - } - - # set leds to normal state - . /etc/diag.sh - set_state done -} diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig deleted file mode 100755 index 4cc23d233b..0000000000 --- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig +++ /dev/null @@ -1,145 +0,0 @@ -#!/bin/sh /etc/rc.common -# Copyright (C) 2006 OpenWrt.org - -START=05 - -start() { - [ -e /etc/config/network ] && exit 0 - - mkdir -p /etc/config - - ( - if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then - # WGT634u - echo boardtype=wgt634u - else - strings /dev/mtdblock/3 - fi - ) | awk ' - function p(cfgname, name) { - if (c[name] != "") print " option " cfgname " \"" c[name] "\"" - } - - function macinc(mac, maca, i, result) { - split(mac, maca, ":") - for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i] - if (++maca[6] > 0xff) { - maca[5]++ - maca[6] = 0 - } - for (i = 1; i <= 6; i++) { - if (i != 1) result = result ":" - result = result sprintf("%02x", maca[i]) - } - return result - } - - BEGIN { - FS="=" - c["lan_ifname"]="eth0.0" - c["wan_ifname"]="eth0.1" - c["vlan0ports"]="1 2 3 4 5*" - c["vlan1ports"]="0 5" - getline < "/proc/diag/model" - model=$0 - for (i = 0; i < 6; i++) { - if (mac_check != "") mac_check = mac_check ":" - mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]" - } - } - - ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) { - nvram[$1] = $2 - } - - END { - if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) { - c["wan_ifname"] = "" - c["lan_ifname"] = "eth1" - } - if (model == "ASUS WL-500g") { - c["wan_ifname"] = "eth1" - c["lan_ifname"] = "eth0" - } - if (nvram["boardtype"] == "bcm94710r4") { - # Toshiba WRC-1000 - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - } - if (nvram["boardtype"] == "wgt634u") { - c["vlan0ports"] = "0 1 2 3 5*" - c["vlan1ports"] = "4 5" - } - if (nvram["boardtype"] == "0x0467") { - c["vlan0ports"] = "0 1 2 3 5*" - c["vlan1ports"] = "4 5" - } - if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) { - if (nvram["boardnum"] == "45") { - # WL-500gP - c["vlan0ports"] = "1 2 3 4 5*" - c["vlan1ports"] = "0 5" - } else { - # Generic BCM94704 - c["vlan0ports"] = "0 1 2 3 4 5u" - c["vlan1ports"] = "" - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - - # MAC addresses on 4704 tend to be screwed up. Add a workaround here - if (nvram["et0macaddr"] ~ mac_check) { - c["lan_macaddr"] = nvram["et0macaddr"] - c["wan_macaddr"] = macinc(c["lan_macaddr"]) - } - } - } - - # WAP54G - if ((nvram["boardnum"] == "2") || \ - (nvram["boardnum"] == "1024")) { - c["lan_ifname"]="eth0" - c["wan_ifname"]="" - } - - # ASUS WL-700gE - # These are actually same as defaults above. For some reason this script applies - # Generic BCM94704 settings instead so we revert to proper settings here. - # Hopefully someone will fix this properly soon. - if (model == "ASUS WL-700gE") { - c["lan_ifname"]="eth0.0" - c["wan_ifname"]="eth0.1" - c["vlan0ports"]="1 2 3 4 5*" - c["vlan1ports"]="0 5" - } - - print "#### VLAN configuration " - print "config switch eth0" - p("vlan0", "vlan0ports") - p("vlan1", "vlan1ports") - print "" - print "" - print "#### Loopback configuration" - print "config interface loopback" - print " option ifname \"lo\"" - print " option proto static" - print " option ipaddr 127.0.0.1" - print " option netmask 255.0.0.0" - print "" - print "" - print "#### LAN configuration" - print "config interface lan" - print " option type bridge" - p("ifname", "lan_ifname") - p("macaddr", "lan_macaddr") - print " option proto static" - print " option ipaddr 192.168.1.1" - print " option netmask 255.255.255.0" - print "" - print "" - print "#### WAN configuration" - print "config interface wan" - p("ifname", "wan_ifname") - p("macaddr", "wan_macaddr") - print " option proto dhcp" - }' > /etc/config/network -} diff --git a/target/linux/brcm-2.4/base-files/etc/preinit b/target/linux/brcm-2.4/base-files/etc/preinit deleted file mode 100755 index 1c4e59f152..0000000000 --- a/target/linux/brcm-2.4/base-files/etc/preinit +++ /dev/null @@ -1,73 +0,0 @@ -#!/bin/sh -# Copyright (C) 2006 OpenWrt.org - -. /etc/functions.sh -. /etc/diag.sh - -failsafe() { - lock /tmp/.failsafe - - echo "0 1 2 3 4 5u*" > /proc/switch/eth0/vlan/0/ports - - set_state failsafe - [ -x "/usr/sbin/nvram" ] && { - [ "$(nvram get boot_wait)" != "on" ] && { - nvram set boot_wait=on - nvram commit - } - } - - netmsg 192.168.1.255 "Entering Failsafe!" - telnetd -l /bin/login <> /dev/null 2>&1 - - ash --login -} - -export PATH=/bin:/sbin:/usr/bin:/usr/sbin -mount none /proc -t proc -size=$(awk '/Mem:/ {l=5242880;print((s=$2/2) /proc/sys/kernel/hotplug - -ifname=eth0 - -# hardware specific overrides -case "$(cat /proc/diag/model)" in - "Linksys WAP54G V1") ifname=eth1;; - "ASUS WL-HDD") ifname=eth1;; - "ASUS WL-300g") ifname=eth1;; - "ASUS (unknown, BCM4702)") ifname=eth1;; -esac - -insmod switch-core -insmod switch-robo || insmod switch-adm || rmmod switch-core - -ifconfig $ifname 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 up - -[ -d /proc/switch/eth0 ] && { - echo 1 > /proc/switch/eth0/reset - - # this would be easier if we blasted the message across all ports - # but we don't want packets leaking across interfaces - for port in $(seq 0 4); do { - echo "$port 5u*" > /proc/switch/eth0/vlan/0/ports - netmsg 192.168.1.255 "Press reset now, to enter Failsafe!" - }; done -} || netmsg 192.168.1.255 "Press reset now, to enter Failsafe!" - -sleep 2 - -eval ${FAILSAFE:+failsafe} - -lock -w /tmp/.failsafe -set_state preinit -echo /sbin/hotplug > /proc/sys/kernel/hotplug - -ifconfig $ifname 0.0.0.0 down - -mount_root -exec /sbin/init diff --git a/target/linux/brcm-2.4/base-files/sbin/hotplug.failsafe b/target/linux/brcm-2.4/base-files/sbin/hotplug.failsafe deleted file mode 100755 index 0544339de8..0000000000 --- a/target/linux/brcm-2.4/base-files/sbin/hotplug.failsafe +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/sh -case "$1" in - button) kill -USR1 1;; -esac diff --git a/target/linux/brcm-2.4/base-files/sbin/mount_root b/target/linux/brcm-2.4/base-files/sbin/mount_root deleted file mode 100755 index ffa6072c66..0000000000 --- a/target/linux/brcm-2.4/base-files/sbin/mount_root +++ /dev/null @@ -1,31 +0,0 @@ -#!/bin/sh -# Copyright (C) 2006 OpenWrt.org - -is_dirty() { - grep Broadcom /proc/cpuinfo >&- || return 1 - OFFSET="$(($(hexdump -v /dev/mtdblock/1 -s 20 -n 2 -e '"%d"')-1))" - return $(hexdump -v /dev/mtdblock/1 -s $OFFSET -n 1 -e '"%d"') -} - -if [ "$1" != "failsafe" ]; then - mtd unlock linux - mount | grep jffs2 >&- - if [ $? = 0 ] ; then - mount -o remount,rw /dev/root / - else - . /bin/firstboot - is_dirty - [ $? != 0 ] && { - echo "switching to jffs2" - mount /dev/mtdblock/4 /jffs -t jffs2 - fopivot /jffs /rom - } || { - echo "jffs2 not ready yet; using ramdisk" - ramoverlay - } - fi -fi - -mkdir -p /dev/pts -mount none /dev/pts -t devpts 2>&- -grep sysfs /proc/filesystems >/dev/null && mount -t sysfs none /sys 2>&- -- cgit v1.2.3