From 029093a302c9a66b74bec46285a179abd122a40a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Sun, 21 Feb 2021 10:00:18 +0100 Subject: bmips: add new target MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This target has full device tree support, thus reducing the number of patches needed for bcm63xx, in which there's a patch for every board. The intention is to start with a minimal amount of downstream patches and start upstreaming all of them. Current status: - Enabling EHCI/OHCI on BCM6358 causes a kernel panic. - BCM63268 lacks Timer Clocks/Reset support. - No PCI/PCIe drivers. - No ethernet drivers. Signed-off-by: Álvaro Fernández Rojas Acked-by: Adrian Schmutzler --- target/linux/bmips/image/Makefile | 257 +++++++++ target/linux/bmips/image/bcm63xx_generic.mk | 74 +++ target/linux/bmips/image/bcm63xx_nand.mk | 81 +++ target/linux/bmips/image/lzma-loader/Makefile | 74 +++ .../linux/bmips/image/lzma-loader/src/LzmaDecode.c | 584 +++++++++++++++++++++ .../linux/bmips/image/lzma-loader/src/LzmaDecode.h | 113 ++++ .../linux/bmips/image/lzma-loader/src/LzmaTypes.h | 45 ++ target/linux/bmips/image/lzma-loader/src/Makefile | 85 +++ target/linux/bmips/image/lzma-loader/src/board.c | 37 ++ target/linux/bmips/image/lzma-loader/src/cache.c | 42 ++ target/linux/bmips/image/lzma-loader/src/cache.h | 13 + .../linux/bmips/image/lzma-loader/src/cacheops.h | 82 +++ target/linux/bmips/image/lzma-loader/src/config.h | 15 + .../linux/bmips/image/lzma-loader/src/cp0regdef.h | 55 ++ target/linux/bmips/image/lzma-loader/src/head.S | 118 +++++ target/linux/bmips/image/lzma-loader/src/loader.c | 169 ++++++ .../linux/bmips/image/lzma-loader/src/loader.lds | 36 ++ .../linux/bmips/image/lzma-loader/src/loader2.lds | 12 + .../bmips/image/lzma-loader/src/lzma-data.lds | 10 + target/linux/bmips/image/lzma-loader/src/printf.c | 345 ++++++++++++ target/linux/bmips/image/lzma-loader/src/printf.h | 13 + 21 files changed, 2260 insertions(+) create mode 100644 target/linux/bmips/image/Makefile create mode 100644 target/linux/bmips/image/bcm63xx_generic.mk create mode 100644 target/linux/bmips/image/bcm63xx_nand.mk create mode 100644 target/linux/bmips/image/lzma-loader/Makefile create mode 100644 target/linux/bmips/image/lzma-loader/src/LzmaDecode.c create mode 100644 target/linux/bmips/image/lzma-loader/src/LzmaDecode.h create mode 100644 target/linux/bmips/image/lzma-loader/src/LzmaTypes.h create mode 100644 target/linux/bmips/image/lzma-loader/src/Makefile create mode 100644 target/linux/bmips/image/lzma-loader/src/board.c create mode 100644 target/linux/bmips/image/lzma-loader/src/cache.c create mode 100644 target/linux/bmips/image/lzma-loader/src/cache.h create mode 100644 target/linux/bmips/image/lzma-loader/src/cacheops.h create mode 100644 target/linux/bmips/image/lzma-loader/src/config.h create mode 100644 target/linux/bmips/image/lzma-loader/src/cp0regdef.h create mode 100644 target/linux/bmips/image/lzma-loader/src/head.S create mode 100644 target/linux/bmips/image/lzma-loader/src/loader.c create mode 100644 target/linux/bmips/image/lzma-loader/src/loader.lds create mode 100644 target/linux/bmips/image/lzma-loader/src/loader2.lds create mode 100644 target/linux/bmips/image/lzma-loader/src/lzma-data.lds create mode 100644 target/linux/bmips/image/lzma-loader/src/printf.c create mode 100644 target/linux/bmips/image/lzma-loader/src/printf.h (limited to 'target/linux/bmips/image') diff --git a/target/linux/bmips/image/Makefile b/target/linux/bmips/image/Makefile new file mode 100644 index 0000000000..c1534a88db --- /dev/null +++ b/target/linux/bmips/image/Makefile @@ -0,0 +1,257 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +KERNEL_LOADADDR := 0x80010000 # RAM start + 64K +LOADER_ENTRY := 0x80a00000 # RAM start + 10M, for relocate +RAMSIZE := 0x02000000 # 32MB +LZMA_TEXT_START := 0x81800000 # 32MB - 8MB + +DEVICE_VARS += CHIP_ID DEVICE_LOADADDR + +define Build/Compile + rm -rf $(KDIR)/relocate + $(CP) ../../generic/image/relocate $(KDIR) + $(MAKE) -C $(KDIR)/relocate \ + CACHELINE_SIZE=16 \ + CROSS_COMPILE=$(TARGET_CROSS) \ + KERNEL_ADDR=$(KERNEL_LOADADDR) \ + LZMA_TEXT_START=$(LOADER_ENTRY) +endef + +### Kernel scripts ### +define Build/loader-lzma + @rm -rf $@.src + $(MAKE) -C lzma-loader \ + CHIP_ID=$(CHIP_ID) \ + KERNEL_ADDR=$(KERNEL_LOADADDR) \ + KDIR=$(KDIR) \ + LOADER_ADDR=$(if $(DEVICE_LOADADDR),$(DEVICE_LOADADDR),$(LOADER_ENTRY)) \ + LOADER_DATA="$@" \ + LOADER_NAME="$(notdir $@)" \ + LZMA_TEXT_START=$(LZMA_TEXT_START) \ + PKG_BUILD_DIR="$@.src" \ + RAMSIZE=$(RAMSIZE) \ + TARGET_DIR="$(dir $@)" \ + compile loader.$(1) + @mv "$@.$(1)" "$@" + @rm -rf $@.src +endef + +define Build/lzma-cfe + # CFE is a LZMA nazi! It took me hours to find out the parameters! + # Also I think lzma has a bug cause it generates different output depending on + # if you use stdin / stdout or not. Use files instead of stdio here, cause + # otherwise CFE will complain and not boot the image. + $(call Build/lzma-no-dict,-d22 -fb64 -a1) + # Strip out the length, CFE doesn't like this + dd if=$@ of=$@.new bs=5 count=1 + dd if=$@ of=$@.new ibs=13 obs=5 skip=1 seek=1 conv=notrunc + @mv $@.new $@ +endef + +define Build/relocate-kernel + # CFE only allows ~4 MiB for the uncompressed kernels, but uncompressed + # kernel might get larger than that, so let CFE unpack and load at a + # higher address and make the kernel relocate itself to the expected + # location. + ( \ + dd if=$(KDIR)/relocate/loader.bin bs=32 conv=sync && \ + perl -e '@s = stat("$@"); print pack("N", @s[7])' && \ + cat $@ \ + ) > $@.relocate + @mv $@.relocate $@ +endef + +### Image scripts ### +define rootfspad/jffs2-128k +--align-rootfs +endef +define rootfspad/jffs2-64k +--align-rootfs +endef +define rootfspad/squashfs +endef + +define Image/FileSystemStrip +$(firstword $(subst +,$(space),$(subst root.,,$(notdir $(1))))) +endef + +define Build/cfe-bin + $(STAGING_DIR_HOST)/bin/imagetag -i $(IMAGE_KERNEL) -f $(IMAGE_ROOTFS) \ + --output $@ --boardid $(CFE_BOARD_ID) --chipid $(CHIP_ID) \ + --entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \ + --info1 "$(call ModelNameLimit16,$(DEVICE_NAME))" \ + --info2 "$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))" \ + $(call rootfspad/$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))) \ + $(CFE_EXTRAS) $(1) +endef + +define Build/cfe-jffs2 + $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \ + --big-endian \ + --pad \ + --no-cleanmarkers \ + --eraseblock=$(patsubst %k,%KiB,$(BLOCKSIZE)) \ + --root=$(1) \ + --output=$@ \ + --compression-mode=none + + $(call Build/pad-to,$(BLOCKSIZE)) +endef + +define Build/cfe-jffs2-cferam + mv $@ $@.kernel + + rm -rf $@-cferam + mkdir -p $@-cferam + + # CFE ROM checks JFFS2 dirent version of cferam. + # If version is not > 0 it will ignore the fs entry. + # JFFS2 sets version 0 to the first fs entry and increments + # it on the following ones, so let's create a dummy file that + # will have version 0 and let cferam be the second (version 1). + touch $@-cferam/1-openwrt + # Add cferam as the last file in the JFFS2 partition + cp $(KDIR)/bcm63xx-cfe/$(CFE_RAM_FILE) $@-cferam/$(CFE_RAM_JFFS2_NAME) + + # The JFFS2 partition creation should result in the following + # layout: + # 1) 1-openwrt (version 0, ino 2) + # 2) cferam.000 (version 1, ino 3) + $(call Build/cfe-jffs2,$@-cferam) + + # Some devices need padding between CFE RAM and kernel + $(if $(CFE_RAM_JFFS2_PAD),$(call Build/pad-to,$(CFE_RAM_JFFS2_PAD))) + + # Add CFE partition tag + $(if $(CFE_PART_ID),$(call Build/cfe-part-tag)) + + # Append kernel + dd if=$@.kernel >> $@ + rm -f $@.kernel +endef + +define Build/cfe-jffs2-kernel + rm -rf $@-kernel + mkdir -p $@-kernel + + # CFE RAM checks JFFS2 dirent version of vmlinux. + # If version is not > 0 it will ignore the fs entry. + # JFFS2 sets version 0 to the first fs entry and increments + # it on the following ones, so let's create a dummy file that + # will have version 0 and let cferam be the second (version 1). + touch $@-kernel/1-openwrt + # vmlinux is located on a different JFFS2 partition, but CFE RAM + # ignores it, so let's create another dummy file that will match + # the JFFS2 ino of cferam entry on the first JFFS2 partition. + # CFE RAM won't be able to find vmlinux if cferam has the same + # ino as vmlinux. + touch $@-kernel/2-openwrt + # Add vmlinux as the last file in the JFFS2 partition + $(TOPDIR)/scripts/cfe-bin-header.py \ + --input-file $@ \ + --output-file $@-kernel/vmlinux.lz \ + --load-addr $(if $(DEVICE_LOADADDR),$(DEVICE_LOADADDR),$(LOADER_ENTRY)) \ + --entry-addr $(if $(DEVICE_LOADADDR),$(DEVICE_LOADADDR),$(LOADER_ENTRY)) + + # The JFFS2 partition creation should result in the following + # layout: + # 1) 1-openwrt (version 0, ino 2) + # 2) 2-openwrt (version 1, ino 3) + # 3) vmlinux.lz (version 2, ino 4) + $(call Build/cfe-jffs2,$@-kernel) +endef + +define Build/cfe-part-tag + mv $@ $@.part + + $(TOPDIR)/scripts/cfe-partition-tag.py \ + --input-file $@.part \ + --output-file $@ \ + --flags $(CFE_PART_FLAGS) \ + --id $(CFE_PART_ID) \ + --name $(VERSION_CODE) \ + --version $(DEVICE_NAME) + + $(call Build/pad-to,$(BLOCKSIZE)) + + dd if=$@.part >> $@ +endef + +define Build/cfe-sercomm-crypto + $(TOPDIR)/scripts/sercomm-crypto.py \ + --input-file $@ \ + --key-file $@.key \ + --output-file $@.ser \ + --version OpenWrt + $(STAGING_DIR_HOST)/bin/openssl enc -md md5 -aes-256-cbc \ + -in $@ -out $@.enc \ + -K `cat $@.key` \ + -iv 00000000000000000000000000000000 + dd if=$@.enc >> $@.ser + mv $@.ser $@ + rm -f $@.enc $@.key +endef + +define Build/cfe-sercomm-load + $(TOPDIR)/scripts/sercomm-payload.py \ + --input-file $@ \ + --output-file $@.new \ + --pid "$(SERCOMM_PID)" + + mv $@.new $@ +endef + +define Build/cfe-sercomm-part + $(TOPDIR)/scripts/sercomm-partition-tag.py \ + --input-file $@ \ + --output-file $@.kernel_rootfs \ + --part-name kernel_rootfs \ + --part-version OpenWrt \ + --rootfs-version $(SERCOMM_VERSION) + + rm -rf $@-rootfs_lib + mkdir -p $@-rootfs_lib + echo $(SERCOMM_VERSION) > $@-rootfs_lib/lib_ver + $(call Build/cfe-jffs2,$@-rootfs_lib) + $(call Build/pad-to,$(BLOCKSIZE)) + $(TOPDIR)/scripts/sercomm-partition-tag.py \ + --input-file $@ \ + --output-file $@.rootfs_lib \ + --part-name rootfs_lib \ + --part-version $(SERCOMM_VERSION) + + mv $@.kernel_rootfs $@ + dd if=$@.rootfs_lib >> $@ +endef + +define Build/cfe-wfi-tag + $(TOPDIR)/scripts/cfe-wfi-tag.py \ + --input-file $@ \ + --output-file $@.new \ + --version $(if $(1),$(1),$(CFE_WFI_VERSION)) \ + --chip-id $(CFE_WFI_CHIP_ID) \ + --flash-type $(CFE_WFI_FLASH_TYPE) \ + $(if $(CFE_WFI_FLAGS),--flags $(CFE_WFI_FLAGS)) + mv $@.new $@ +endef + +### Device scripts ### +define Device/Default + PROFILES = Default $$(DEVICE_NAME) + KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts) + DEVICE_DTS_DIR := ../dts + CHIP_ID := + SOC = bcm$$(CHIP_ID) + DEVICE_DTS = $$(SOC)-$(subst _,-,$(1)) + DEVICE_LOADADDR := +endef + +USB1_PACKAGES := kmod-usb-ohci kmod-ledtrig-usbdev +USB2_PACKAGES := $(USB1_PACKAGES) kmod-usb2 + +include bcm63xx_$(SUBTARGET).mk + +$(eval $(call BuildImage)) diff --git a/target/linux/bmips/image/bcm63xx_generic.mk b/target/linux/bmips/image/bcm63xx_generic.mk new file mode 100644 index 0000000000..6f9a7b9a49 --- /dev/null +++ b/target/linux/bmips/image/bcm63xx_generic.mk @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +DEVICE_VARS += CFE_BOARD_ID CFE_EXTRAS +DEVICE_VARS += FLASH_MB IMAGE_OFFSET + +define Device/bcm63xx-cfe + FILESYSTEMS := squashfs jffs2-64k jffs2-128k + KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma + KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf + KERNEL_INITRAMFS_SUFFIX := .elf + IMAGES := cfe.bin sysupgrade.bin + IMAGE/cfe.bin := \ + cfe-bin $$$$(if $$$$(FLASH_MB),--pad $$$$(shell expr $$$$(FLASH_MB) / 2)) + IMAGE/sysupgrade.bin := cfe-bin | append-metadata + BLOCKSIZE := 0x10000 + IMAGE_OFFSET := + FLASH_MB := + CFE_BOARD_ID := + CFE_EXTRAS = --block-size $$(BLOCKSIZE) \ + --image-offset $$(if $$(IMAGE_OFFSET),$$(IMAGE_OFFSET),$$(BLOCKSIZE)) +endef + +# Legacy CFEs with specific LZMA parameters and no length +define Device/bcm63xx-cfe-legacy + $(Device/bcm63xx-cfe) + KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma-cfe +endef + +define Device/comtrend_ar-5315u + $(Device/bcm63xx-cfe) + DEVICE_VENDOR := Comtrend + DEVICE_MODEL := AR-5315u + CHIP_ID := 6318 + CFE_BOARD_ID := 96318A-1441N1 + FLASH_MB := 16 + DEVICE_PACKAGES += $(USB2_PACKAGES) +endef +TARGET_DEVICES += comtrend_ar-5315u + +define Device/comtrend_ar-5387un + $(Device/bcm63xx-cfe) + DEVICE_VENDOR := Comtrend + DEVICE_MODEL := AR-5387un + CHIP_ID := 6328 + CFE_BOARD_ID := 96328A-1441N1 + FLASH_MB := 16 + DEVICE_PACKAGES += $(USB2_PACKAGES) +endef +TARGET_DEVICES += comtrend_ar-5387un + +define Device/comtrend_vr-3025u + $(Device/bcm63xx-cfe) + DEVICE_VENDOR := Comtrend + DEVICE_MODEL := VR-3025u + CHIP_ID := 6368 + CFE_BOARD_ID := 96368M-1541N + BLOCKSIZE := 0x20000 + FLASH_MB := 32 + DEVICE_PACKAGES += $(USB2_PACKAGES) +endef +TARGET_DEVICES += comtrend_vr-3025u + +define Device/huawei_hg556a-b + $(Device/bcm63xx-cfe-legacy) + DEVICE_VENDOR := Huawei + DEVICE_MODEL := EchoLife HG556a + DEVICE_VARIANT := B + CHIP_ID := 6358 + CFE_BOARD_ID := HW556 + CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8 + BLOCKSIZE := 0x20000 + DEVICE_PACKAGES += $(USB2_PACKAGES) +endef +TARGET_DEVICES += huawei_hg556a-b diff --git a/target/linux/bmips/image/bcm63xx_nand.mk b/target/linux/bmips/image/bcm63xx_nand.mk new file mode 100644 index 0000000000..a712cd0699 --- /dev/null +++ b/target/linux/bmips/image/bcm63xx_nand.mk @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +DEVICE_VARS += CFE_PART_FLAGS CFE_PART_ID +DEVICE_VARS += CFE_RAM_FILE +DEVICE_VARS += CFE_RAM_JFFS2_NAME CFE_RAM_JFFS2_PAD +DEVICE_VARS += CFE_WFI_CHIP_ID CFE_WFI_FLASH_TYPE +DEVICE_VARS += CFE_WFI_FLAGS CFE_WFI_VERSION +DEVICE_VARS += SERCOMM_PID SERCOMM_VERSION + +# CFE expects a single JFFS2 partition with cferam and kernel. However, +# it's possible to fool CFE into properly loading both cferam and kernel +# from two different JFFS2 partitions by adding dummy files (see +# cfe-jffs2-cferam and cfe-jffs2-kernel). +# Separate JFFS2 partitions allow upgrading openwrt without reflashing cferam +# JFFS2 partition, which is much safer in case anything goes wrong. +define Device/bcm63xx-nand + FILESYSTEMS := squashfs ubifs + KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | cfe-jffs2-kernel + KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf + KERNEL_INITRAMFS_SUFFIX := .elf + IMAGES := cfe.bin sysupgrade.bin + IMAGE/cfe.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) |\ + cfe-jffs2-cferam | append-ubi | cfe-wfi-tag + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + KERNEL_SIZE := 5120k + CFE_PART_FLAGS := + CFE_PART_ID := + CFE_RAM_FILE := + CFE_RAM_JFFS2_NAME := + CFE_RAM_JFFS2_PAD := + CFE_WFI_VERSION := + CFE_WFI_CHIP_ID = 0x$$(CHIP_ID) + CFE_WFI_FLASH_TYPE := + CFE_WFI_FLAGS := + UBINIZE_OPTS := -E 5 + DEVICE_PACKAGES += nand-utils +endef + +define Device/sercomm-nand + $(Device/bcm63xx-nand) + IMAGES := factory.img sysupgrade.bin + IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi |\ + cfe-sercomm-part | gzip | cfe-sercomm-load | cfe-sercomm-crypto + SERCOM_PID := + SERCOMM_VERSION := +endef + +define Device/comtrend_vr-3032u + $(Device/bcm63xx-nand) + DEVICE_VENDOR := Comtrend + DEVICE_MODEL := VR-3032u + CHIP_ID := 63268 + SOC := bcm63168 + CFE_RAM_FILE := comtrend,vr-3032u/cferam.000 + CFE_RAM_JFFS2_NAME := cferam.000 + BLOCKSIZE := 128k + PAGESIZE := 2048 + SUBPAGESIZE := 512 + VID_HDR_OFFSET := 2048 + DEVICE_PACKAGES += $(USB2_PACKAGES) + CFE_WFI_FLASH_TYPE := 3 + CFE_WFI_VERSION := 0x5732 +endef +TARGET_DEVICES += comtrend_vr-3032u + +define Device/netgear_dgnd3700-v2 + $(Device/bcm63xx-nand) + DEVICE_VENDOR := NETGEAR + DEVICE_MODEL := DGND3700 + DEVICE_VARIANT := v2 + CHIP_ID := 6362 + CFE_RAM_FILE := netgear,dgnd3700-v2/cferam + CFE_RAM_JFFS2_NAME := cferam + CFE_RAM_JFFS2_PAD := 496k + BLOCKSIZE := 16k + PAGESIZE := 512 + DEVICE_PACKAGES += $(USB2_PACKAGES) + CFE_WFI_FLASH_TYPE := 2 + CFE_WFI_VERSION := 0x5731 +endef +TARGET_DEVICES += netgear_dgnd3700-v2 diff --git a/target/linux/bmips/image/lzma-loader/Makefile b/target/linux/bmips/image/lzma-loader/Makefile new file mode 100644 index 0000000000..045d1be9a3 --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/Makefile @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +# +# Copyright (C) 2020 Álvaro Fernández Rojas +# Copyright (C) 2014 Jonas Gorski +# Copyright (C) 2011 OpenWrt.org +# Copyright (C) 2011 Gabor Juhos +# + +include $(TOPDIR)/rules.mk + +LZMA_TEXT_START := 0x80a00000 +LOADER := loader.bin +LOADER_NAME := $(basename $(notdir $(LOADER))) +LOADER_DATA := +TARGET_DIR := + +UART_BASE_3329 := 0xb0000100 +UART_BASE_3368 := 0xfff8c100 +UART_BASE_3380 := 0xb4e00200 +UART_BASE_3383 := 0xb4e00500 +UART_BASE_3384 := 0xb4e00500 +UART_BASE_6318 := 0xb0000100 +UART_BASE_6328 := 0xb0000100 +UART_BASE_6338 := 0xfffe0300 +UART_BASE_6345 := 0xfffe0300 +UART_BASE_6348 := 0xfffe0300 +UART_BASE_6358 := 0xfffe0100 +UART_BASE_6362 := 0xb0000100 +UART_BASE_6368 := 0xb0000100 +UART_BASE_63268 := 0xb0000180 +UART_BASE_6816 := 0xb0000100 +UART_BASE_6818 := 0xb0000100 +UART_BASE_6828 := 0xb0000180 +UART_BASE := $(if $(UART_BASE_$(CHIP_ID)),$(UART_BASE_$(CHIP_ID)),0) + +ifeq ($(TARGET_DIR),) +TARGET_DIR := $(KDIR) +endif + +LOADER_BIN := $(TARGET_DIR)/$(LOADER_NAME).bin +LOADER_ELF := $(TARGET_DIR)/$(LOADER_NAME).elf + +PKG_NAME := lzma-loader +PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME) + +.PHONY : loader-compile loader.bin loader.elf + +$(PKG_BUILD_DIR)/.prepared: + mkdir $(PKG_BUILD_DIR) + $(CP) ./src/* $(PKG_BUILD_DIR)/ + touch $@ + +loader-compile: $(PKG_BUILD_DIR)/.prepared + $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \ + LZMA_TEXT_START=$(LZMA_TEXT_START) \ + LOADER_DATA=$(LOADER_DATA) \ + UART_BASE=$(UART_BASE) \ + clean all + +loader.elf: $(PKG_BUILD_DIR)/loader.elf + $(CP) $< $(LOADER_ELF) + +loader.bin: $(PKG_BUILD_DIR)/loader.bin + $(CP) $< $(LOADER_BIN) + +download: +prepare: $(PKG_BUILD_DIR)/.prepared +compile: loader-compile + +install: + +clean: + rm -rf $(PKG_BUILD_DIR) diff --git a/target/linux/bmips/image/lzma-loader/src/LzmaDecode.c b/target/linux/bmips/image/lzma-loader/src/LzmaDecode.c new file mode 100644 index 0000000000..cb8345377e --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/LzmaDecode.c @@ -0,0 +1,584 @@ +/* + LzmaDecode.c + LZMA Decoder (optimized for Speed version) + + LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this Code, expressly permits you to + statically or dynamically link your Code (or bind by name) to the + interfaces of this file without subjecting your linked Code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#include "LzmaDecode.h" + +#define kNumTopBits 24 +#define kTopValue ((UInt32)1 << kNumTopBits) + +#define kNumBitModelTotalBits 11 +#define kBitModelTotal (1 << kNumBitModelTotalBits) +#define kNumMoveBits 5 + +#define RC_READ_BYTE (*Buffer++) + +#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ + { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} + +#ifdef _LZMA_IN_CB + +#define RC_TEST { if (Buffer == BufferLim) \ + { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ + BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} + +#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 + +#else + +#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } + +#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 + +#endif + +#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } + +#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) +#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; +#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; + +#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ + { UpdateBit0(p); mi <<= 1; A0; } else \ + { UpdateBit1(p); mi = (mi + mi) + 1; A1; } + +#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) + +#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ + { int i = numLevels; res = 1; \ + do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ + res -= (1 << numLevels); } + + +#define kNumPosBitsMax 4 +#define kNumPosStatesMax (1 << kNumPosBitsMax) + +#define kLenNumLowBits 3 +#define kLenNumLowSymbols (1 << kLenNumLowBits) +#define kLenNumMidBits 3 +#define kLenNumMidSymbols (1 << kLenNumMidBits) +#define kLenNumHighBits 8 +#define kLenNumHighSymbols (1 << kLenNumHighBits) + +#define LenChoice 0 +#define LenChoice2 (LenChoice + 1) +#define LenLow (LenChoice2 + 1) +#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) +#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) +#define kNumLenProbs (LenHigh + kLenNumHighSymbols) + + +#define kNumStates 12 +#define kNumLitStates 7 + +#define kStartPosModelIndex 4 +#define kEndPosModelIndex 14 +#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) + +#define kNumPosSlotBits 6 +#define kNumLenToPosStates 4 + +#define kNumAlignBits 4 +#define kAlignTableSize (1 << kNumAlignBits) + +#define kMatchMinLen 2 + +#define IsMatch 0 +#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) +#define IsRepG0 (IsRep + kNumStates) +#define IsRepG1 (IsRepG0 + kNumStates) +#define IsRepG2 (IsRepG1 + kNumStates) +#define IsRep0Long (IsRepG2 + kNumStates) +#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) +#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) +#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) +#define LenCoder (Align + kAlignTableSize) +#define RepLenCoder (LenCoder + kNumLenProbs) +#define Literal (RepLenCoder + kNumLenProbs) + +#if Literal != LZMA_BASE_SIZE +StopCompilingDueBUG +#endif + +int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) +{ + unsigned char prop0; + if (size < LZMA_PROPERTIES_SIZE) + return LZMA_RESULT_DATA_ERROR; + prop0 = propsData[0]; + if (prop0 >= (9 * 5 * 5)) + return LZMA_RESULT_DATA_ERROR; + { + for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); + for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); + propsRes->lc = prop0; + /* + unsigned char remainder = (unsigned char)(prop0 / 9); + propsRes->lc = prop0 % 9; + propsRes->pb = remainder / 5; + propsRes->lp = remainder % 5; + */ + } + + #ifdef _LZMA_OUT_READ + { + int i; + propsRes->DictionarySize = 0; + for (i = 0; i < 4; i++) + propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8); + if (propsRes->DictionarySize == 0) + propsRes->DictionarySize = 1; + } + #endif + return LZMA_RESULT_OK; +} + +#define kLzmaStreamWasFinishedId (-1) + +int LzmaDecode(CLzmaDecoderState *vs, + #ifdef _LZMA_IN_CB + ILzmaInCallback *InCallback, + #else + const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, + #endif + unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) +{ + CProb *p = vs->Probs; + SizeT nowPos = 0; + Byte previousByte = 0; + UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; + UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; + int lc = vs->Properties.lc; + + #ifdef _LZMA_OUT_READ + + UInt32 Range = vs->Range; + UInt32 Code = vs->Code; + #ifdef _LZMA_IN_CB + const Byte *Buffer = vs->Buffer; + const Byte *BufferLim = vs->BufferLim; + #else + const Byte *Buffer = inStream; + const Byte *BufferLim = inStream + inSize; + #endif + int state = vs->State; + UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; + int len = vs->RemainLen; + UInt32 globalPos = vs->GlobalPos; + UInt32 distanceLimit = vs->DistanceLimit; + + Byte *dictionary = vs->Dictionary; + UInt32 dictionarySize = vs->Properties.DictionarySize; + UInt32 dictionaryPos = vs->DictionaryPos; + + Byte tempDictionary[4]; + + #ifndef _LZMA_IN_CB + *inSizeProcessed = 0; + #endif + *outSizeProcessed = 0; + if (len == kLzmaStreamWasFinishedId) + return LZMA_RESULT_OK; + + if (dictionarySize == 0) + { + dictionary = tempDictionary; + dictionarySize = 1; + tempDictionary[0] = vs->TempDictionary[0]; + } + + if (len == kLzmaNeedInitId) + { + { + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); + UInt32 i; + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + rep0 = rep1 = rep2 = rep3 = 1; + state = 0; + globalPos = 0; + distanceLimit = 0; + dictionaryPos = 0; + dictionary[dictionarySize - 1] = 0; + #ifdef _LZMA_IN_CB + RC_INIT; + #else + RC_INIT(inStream, inSize); + #endif + } + len = 0; + } + while(len != 0 && nowPos < outSize) + { + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + len--; + } + if (dictionaryPos == 0) + previousByte = dictionary[dictionarySize - 1]; + else + previousByte = dictionary[dictionaryPos - 1]; + + #else /* if !_LZMA_OUT_READ */ + + int state = 0; + UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; + int len = 0; + const Byte *Buffer; + const Byte *BufferLim; + UInt32 Range; + UInt32 Code; + + #ifndef _LZMA_IN_CB + *inSizeProcessed = 0; + #endif + *outSizeProcessed = 0; + + { + UInt32 i; + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + } + + #ifdef _LZMA_IN_CB + RC_INIT; + #else + RC_INIT(inStream, inSize); + #endif + + #endif /* _LZMA_OUT_READ */ + + while(nowPos < outSize) + { + CProb *prob; + UInt32 bound; + int posState = (int)( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + & posStateMask); + + prob = p + IsMatch + (state << kNumPosBitsMax) + posState; + IfBit0(prob) + { + int symbol = 1; + UpdateBit0(prob) + prob = p + Literal + (LZMA_LIT_SIZE * + ((( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + & literalPosMask) << lc) + (previousByte >> (8 - lc)))); + + if (state >= kNumLitStates) + { + int matchByte; + #ifdef _LZMA_OUT_READ + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + matchByte = dictionary[pos]; + #else + matchByte = outStream[nowPos - rep0]; + #endif + do + { + int bit; + CProb *probLit; + matchByte <<= 1; + bit = (matchByte & 0x100); + probLit = prob + 0x100 + bit + symbol; + RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) + } + while (symbol < 0x100); + } + while (symbol < 0x100) + { + CProb *probLit = prob + symbol; + RC_GET_BIT(probLit, symbol) + } + previousByte = (Byte)symbol; + + outStream[nowPos++] = previousByte; + #ifdef _LZMA_OUT_READ + if (distanceLimit < dictionarySize) + distanceLimit++; + + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #endif + if (state < 4) state = 0; + else if (state < 10) state -= 3; + else state -= 6; + } + else + { + UpdateBit1(prob); + prob = p + IsRep + state; + IfBit0(prob) + { + UpdateBit0(prob); + rep3 = rep2; + rep2 = rep1; + rep1 = rep0; + state = state < kNumLitStates ? 0 : 3; + prob = p + LenCoder; + } + else + { + UpdateBit1(prob); + prob = p + IsRepG0 + state; + IfBit0(prob) + { + UpdateBit0(prob); + prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; + IfBit0(prob) + { + #ifdef _LZMA_OUT_READ + UInt32 pos; + #endif + UpdateBit0(prob); + + #ifdef _LZMA_OUT_READ + if (distanceLimit == 0) + #else + if (nowPos == 0) + #endif + return LZMA_RESULT_DATA_ERROR; + + state = state < kNumLitStates ? 9 : 11; + #ifdef _LZMA_OUT_READ + pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + previousByte = dictionary[pos]; + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #else + previousByte = outStream[nowPos - rep0]; + #endif + outStream[nowPos++] = previousByte; + #ifdef _LZMA_OUT_READ + if (distanceLimit < dictionarySize) + distanceLimit++; + #endif + + continue; + } + else + { + UpdateBit1(prob); + } + } + else + { + UInt32 distance; + UpdateBit1(prob); + prob = p + IsRepG1 + state; + IfBit0(prob) + { + UpdateBit0(prob); + distance = rep1; + } + else + { + UpdateBit1(prob); + prob = p + IsRepG2 + state; + IfBit0(prob) + { + UpdateBit0(prob); + distance = rep2; + } + else + { + UpdateBit1(prob); + distance = rep3; + rep3 = rep2; + } + rep2 = rep1; + } + rep1 = rep0; + rep0 = distance; + } + state = state < kNumLitStates ? 8 : 11; + prob = p + RepLenCoder; + } + { + int numBits, offset; + CProb *probLen = prob + LenChoice; + IfBit0(probLen) + { + UpdateBit0(probLen); + probLen = prob + LenLow + (posState << kLenNumLowBits); + offset = 0; + numBits = kLenNumLowBits; + } + else + { + UpdateBit1(probLen); + probLen = prob + LenChoice2; + IfBit0(probLen) + { + UpdateBit0(probLen); + probLen = prob + LenMid + (posState << kLenNumMidBits); + offset = kLenNumLowSymbols; + numBits = kLenNumMidBits; + } + else + { + UpdateBit1(probLen); + probLen = prob + LenHigh; + offset = kLenNumLowSymbols + kLenNumMidSymbols; + numBits = kLenNumHighBits; + } + } + RangeDecoderBitTreeDecode(probLen, numBits, len); + len += offset; + } + + if (state < 4) + { + int posSlot; + state += kNumLitStates; + prob = p + PosSlot + + ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << + kNumPosSlotBits); + RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); + if (posSlot >= kStartPosModelIndex) + { + int numDirectBits = ((posSlot >> 1) - 1); + rep0 = (2 | ((UInt32)posSlot & 1)); + if (posSlot < kEndPosModelIndex) + { + rep0 <<= numDirectBits; + prob = p + SpecPos + rep0 - posSlot - 1; + } + else + { + numDirectBits -= kNumAlignBits; + do + { + RC_NORMALIZE + Range >>= 1; + rep0 <<= 1; + if (Code >= Range) + { + Code -= Range; + rep0 |= 1; + } + } + while (--numDirectBits != 0); + prob = p + Align; + rep0 <<= kNumAlignBits; + numDirectBits = kNumAlignBits; + } + { + int i = 1; + int mi = 1; + do + { + CProb *prob3 = prob + mi; + RC_GET_BIT2(prob3, mi, ; , rep0 |= i); + i <<= 1; + } + while(--numDirectBits != 0); + } + } + else + rep0 = posSlot; + if (++rep0 == (UInt32)(0)) + { + /* it's for stream version */ + len = kLzmaStreamWasFinishedId; + break; + } + } + + len += kMatchMinLen; + #ifdef _LZMA_OUT_READ + if (rep0 > distanceLimit) + #else + if (rep0 > nowPos) + #endif + return LZMA_RESULT_DATA_ERROR; + + #ifdef _LZMA_OUT_READ + if (dictionarySize - distanceLimit > (UInt32)len) + distanceLimit += len; + else + distanceLimit = dictionarySize; + #endif + + do + { + #ifdef _LZMA_OUT_READ + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + previousByte = dictionary[pos]; + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #else + previousByte = outStream[nowPos - rep0]; + #endif + len--; + outStream[nowPos++] = previousByte; + } + while(len != 0 && nowPos < outSize); + } + } + RC_NORMALIZE; + + #ifdef _LZMA_OUT_READ + vs->Range = Range; + vs->Code = Code; + vs->DictionaryPos = dictionaryPos; + vs->GlobalPos = globalPos + (UInt32)nowPos; + vs->DistanceLimit = distanceLimit; + vs->Reps[0] = rep0; + vs->Reps[1] = rep1; + vs->Reps[2] = rep2; + vs->Reps[3] = rep3; + vs->State = state; + vs->RemainLen = len; + vs->TempDictionary[0] = tempDictionary[0]; + #endif + + #ifdef _LZMA_IN_CB + vs->Buffer = Buffer; + vs->BufferLim = BufferLim; + #else + *inSizeProcessed = (SizeT)(Buffer - inStream); + #endif + *outSizeProcessed = nowPos; + return LZMA_RESULT_OK; +} diff --git a/target/linux/bmips/image/lzma-loader/src/LzmaDecode.h b/target/linux/bmips/image/lzma-loader/src/LzmaDecode.h new file mode 100644 index 0000000000..2870eeb9c9 --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/LzmaDecode.h @@ -0,0 +1,113 @@ +/* + LzmaDecode.h + LZMA Decoder interface + + LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this code, expressly permits you to + statically or dynamically link your code (or bind by name) to the + interfaces of this file without subjecting your linked code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#ifndef __LZMADECODE_H +#define __LZMADECODE_H + +#include "LzmaTypes.h" + +/* #define _LZMA_IN_CB */ +/* Use callback for input data */ + +/* #define _LZMA_OUT_READ */ +/* Use read function for output data */ + +/* #define _LZMA_PROB32 */ +/* It can increase speed on some 32-bit CPUs, + but memory usage will be doubled in that case */ + +/* #define _LZMA_LOC_OPT */ +/* Enable local speed optimizations inside code */ + +#ifdef _LZMA_PROB32 +#define CProb UInt32 +#else +#define CProb UInt16 +#endif + +#define LZMA_RESULT_OK 0 +#define LZMA_RESULT_DATA_ERROR 1 + +#ifdef _LZMA_IN_CB +typedef struct _ILzmaInCallback +{ + int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize); +} ILzmaInCallback; +#endif + +#define LZMA_BASE_SIZE 1846 +#define LZMA_LIT_SIZE 768 + +#define LZMA_PROPERTIES_SIZE 5 + +typedef struct _CLzmaProperties +{ + int lc; + int lp; + int pb; + #ifdef _LZMA_OUT_READ + UInt32 DictionarySize; + #endif +}CLzmaProperties; + +int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); + +#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) + +#define kLzmaNeedInitId (-2) + +typedef struct _CLzmaDecoderState +{ + CLzmaProperties Properties; + CProb *Probs; + + #ifdef _LZMA_IN_CB + const unsigned char *Buffer; + const unsigned char *BufferLim; + #endif + + #ifdef _LZMA_OUT_READ + unsigned char *Dictionary; + UInt32 Range; + UInt32 Code; + UInt32 DictionaryPos; + UInt32 GlobalPos; + UInt32 DistanceLimit; + UInt32 Reps[4]; + int State; + int RemainLen; + unsigned char TempDictionary[4]; + #endif +} CLzmaDecoderState; + +#ifdef _LZMA_OUT_READ +#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; } +#endif + +int LzmaDecode(CLzmaDecoderState *vs, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback, + #else + const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, + #endif + unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); + +#endif diff --git a/target/linux/bmips/image/lzma-loader/src/LzmaTypes.h b/target/linux/bmips/image/lzma-loader/src/LzmaTypes.h new file mode 100644 index 0000000000..9c27290757 --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/LzmaTypes.h @@ -0,0 +1,45 @@ +/* +LzmaTypes.h + +Types for LZMA Decoder + +This file written and distributed to public domain by Igor Pavlov. +This file is part of LZMA SDK 4.40 (2006-05-01) +*/ + +#ifndef __LZMATYPES_H +#define __LZMATYPES_H + +#ifndef _7ZIP_BYTE_DEFINED +#define _7ZIP_BYTE_DEFINED +typedef unsigned char Byte; +#endif + +#ifndef _7ZIP_UINT16_DEFINED +#define _7ZIP_UINT16_DEFINED +typedef unsigned short UInt16; +#endif + +#ifndef _7ZIP_UINT32_DEFINED +#define _7ZIP_UINT32_DEFINED +#ifdef _LZMA_UINT32_IS_ULONG +typedef unsigned long UInt32; +#else +typedef unsigned int UInt32; +#endif +#endif + +/* #define _LZMA_NO_SYSTEM_SIZE_T */ +/* You can use it, if you don't want */ + +#ifndef _7ZIP_SIZET_DEFINED +#define _7ZIP_SIZET_DEFINED +#ifdef _LZMA_NO_SYSTEM_SIZE_T +typedef UInt32 SizeT; +#else +#include +typedef size_t SizeT; +#endif +#endif + +#endif diff --git a/target/linux/bmips/image/lzma-loader/src/Makefile b/target/linux/bmips/image/lzma-loader/src/Makefile new file mode 100644 index 0000000000..2e78e8c246 --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/Makefile @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +# +# Makefile for the LZMA compressed kernel loader for BMIPS based boards +# +# Copyright (C) 2020 Álvaro Fernández Rojas +# Copyright (C) 2014 Jonas Gorski +# Copyright (C) 2011 Gabor Juhos +# +# Some parts of this file was based on the OpenWrt specific lzma-loader +# for the BCM47xx and ADM5120 based boards: +# Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) +# Copyright (C) 2005 Mineharu Takahara +# Copyright (C) 2005 by Oleg I. Vdovikin +# + +LOADER_ADDR := +KERNEL_ADDR := +LZMA_TEXT_START := 0x80a00000 +LOADER_DATA := + +CC := $(CROSS_COMPILE)gcc +LD := $(CROSS_COMPILE)ld +OBJCOPY := $(CROSS_COMPILE)objcopy +OBJDUMP := $(CROSS_COMPILE)objdump + +BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug \ + -R .MIPS.abiflags -S + +CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ + -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \ + -mno-abicalls -fno-pic -ffunction-sections -pipe \ + -ffreestanding -fhonour-copts \ + -mabi=32 -march=mips32 \ + -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap +CFLAGS += -D_LZMA_PROB32 +CFLAGS += -DUART_BASE=$(UART_BASE) + +ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +LDFLAGS = -static --gc-sections -no-warn-mismatch +LDFLAGS += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START) + +O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32) + +OBJECTS := head.o loader.o cache.o board.o printf.o LzmaDecode.o + +ifneq ($(strip $(LOADER_DATA)),) +OBJECTS += data.o +CFLAGS += -DLZMA_WRAPPER=1 -DLOADADDR=$(KERNEL_ADDR) +endif + + +all: loader.elf + +# Don't build dependencies, this may die if $(CC) isn't gcc +dep: + +install: + +%.o : %.c + $(CC) $(CFLAGS) -c -o $@ $< + +%.o : %.S + $(CC) $(ASFLAGS) -c -o $@ $< + +data.o: $(LOADER_DATA) + $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $< + +loader: $(OBJECTS) + $(LD) $(LDFLAGS) -o $@ $(OBJECTS) + +loader.bin: loader + $(OBJCOPY) $(BIN_FLAGS) $< $@ + +loader2.o: loader.bin + $(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $< + +loader.elf: loader2.o + $(LD) -e startup -T loader2.lds -Ttext $(LOADER_ADDR) -o $@ $< + +mrproper: clean + +clean: + rm -f loader *.elf *.bin *.o diff --git a/target/linux/bmips/image/lzma-loader/src/board.c b/target/linux/bmips/image/lzma-loader/src/board.c new file mode 100644 index 0000000000..8319cf1579 --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/board.c @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * BCM63XX specific implementation parts + * + * Copyright (C) 2020 Álvaro Fernández Rojas + * Copyright (C) 2014 Jonas Gorski + */ + +#include +#include "config.h" + +#define READREG(r) *(volatile unsigned int *)(r) +#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v + +#define UART_IR_REG 0x10 +#define UART_FIFO_REG 0x14 + +static void wait_xfered(void) +{ + unsigned int val; + + do { + val = READREG(UART_BASE + UART_IR_REG); + if (val & (1 << 5)) + break; + } while (1); +} + +void board_putc(int ch) +{ + if (!UART_BASE) + return; + + wait_xfered(); + WRITEREG(UART_BASE + UART_FIFO_REG, ch); + wait_xfered(); +} diff --git a/target/linux/bmips/image/lzma-loader/src/cache.c b/target/linux/bmips/image/lzma-loader/src/cache.c new file mode 100644 index 0000000000..2c79c34a42 --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/cache.c @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards + * + * Copyright (C) 2011 Gabor Juhos + * + * The cache manipulation routine has been taken from the U-Boot project. + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, + */ + +#include "cache.h" +#include "cacheops.h" +#include "config.h" +#include "printf.h" + +#define cache_op(op,addr) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3\n\t \n" \ + " cache %0, %1 \n" \ + " .set pop \n" \ + : \ + : "i" (op), "R" (*(unsigned char *)(addr))) + +void flush_cache(unsigned long start_addr, unsigned long size) +{ + unsigned long lsize = CONFIG_CACHELINE_SIZE; + unsigned long addr = start_addr & ~(lsize - 1); + unsigned long aend = (start_addr + size + (lsize - 1)) & ~(lsize - 1); + + printf("blasting from 0x%08x to 0x%08x (0x%08x - 0x%08x)\n", start_addr, size, addr, aend); + + while (1) { + cache_op(Hit_Writeback_Inv_D, addr); + cache_op(Hit_Invalidate_I, addr); + if (addr == aend) + break; + addr += lsize; + } +} diff --git a/target/linux/bmips/image/lzma-loader/src/cache.h b/target/linux/bmips/image/lzma-loader/src/cache.h new file mode 100644 index 0000000000..831ac7b552 --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/cache.h @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards + * + * Copyright (C) 2011 Gabor Juhos + */ + +#ifndef __CACHE_H +#define __CACHE_H + +void flush_cache(unsigned long start_addr, unsigned long size); + +#endif /* __CACHE_H */ diff --git a/target/linux/bmips/image/lzma-loader/src/cacheops.h b/target/linux/bmips/image/lzma-loader/src/cacheops.h new file mode 100644 index 0000000000..2a4f90c913 --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/cacheops.h @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Cache operations for the cache instruction. + * + * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle + * (C) Copyright 1999 Silicon Graphics, Inc. + */ +#ifndef __ASM_CACHEOPS_H +#define __ASM_CACHEOPS_H + +/* + * Cache Operations available on all MIPS processors with R4000-style caches + */ +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 +#define Index_Load_Tag_I 0x04 +#define Index_Load_Tag_D 0x05 +#define Index_Store_Tag_I 0x08 +#define Index_Store_Tag_D 0x09 +#if defined(CONFIG_CPU_LOONGSON2) +#define Hit_Invalidate_I 0x00 +#else +#define Hit_Invalidate_I 0x10 +#endif +#define Hit_Invalidate_D 0x11 +#define Hit_Writeback_Inv_D 0x15 + +/* + * R4000-specific cacheops + */ +#define Create_Dirty_Excl_D 0x0d +#define Fill 0x14 +#define Hit_Writeback_I 0x18 +#define Hit_Writeback_D 0x19 + +/* + * R4000SC and R4400SC-specific cacheops + */ +#define Index_Invalidate_SI 0x02 +#define Index_Writeback_Inv_SD 0x03 +#define Index_Load_Tag_SI 0x06 +#define Index_Load_Tag_SD 0x07 +#define Index_Store_Tag_SI 0x0A +#define Index_Store_Tag_SD 0x0B +#define Create_Dirty_Excl_SD 0x0f +#define Hit_Invalidate_SI 0x12 +#define Hit_Invalidate_SD 0x13 +#define Hit_Writeback_Inv_SD 0x17 +#define Hit_Writeback_SD 0x1b +#define Hit_Set_Virtual_SI 0x1e +#define Hit_Set_Virtual_SD 0x1f + +/* + * R5000-specific cacheops + */ +#define R5K_Page_Invalidate_S 0x17 + +/* + * RM7000-specific cacheops + */ +#define Page_Invalidate_T 0x16 + +/* + * R10000-specific cacheops + * + * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused. + * Most of the _S cacheops are identical to the R4000SC _SD cacheops. + */ +#define Index_Writeback_Inv_S 0x03 +#define Index_Load_Tag_S 0x07 +#define Index_Store_Tag_S 0x0B +#define Hit_Invalidate_S 0x13 +#define Cache_Barrier 0x14 +#define Hit_Writeback_Inv_S 0x17 +#define Index_Load_Data_I 0x18 +#define Index_Load_Data_D 0x19 +#define Index_Load_Data_S 0x1b +#define Index_Store_Data_I 0x1c +#define Index_Store_Data_D 0x1d +#define Index_Store_Data_S 0x1f + +#endif /* __ASM_CACHEOPS_H */ diff --git a/target/linux/bmips/image/lzma-loader/src/config.h b/target/linux/bmips/image/lzma-loader/src/config.h new file mode 100644 index 0000000000..5c8a90310c --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/config.h @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards + * + * Copyright (C) 2011 Gabor Juhos + */ + +#ifndef _CONFIG_H_ +#define _CONFIG_H_ + +#define CONFIG_ICACHE_SIZE (32 * 1024) +#define CONFIG_DCACHE_SIZE (32 * 1024) +#define CONFIG_CACHELINE_SIZE 16 + +#endif /* _CONFIG_H_ */ diff --git a/target/linux/bmips/image/lzma-loader/src/cp0regdef.h b/target/linux/bmips/image/lzma-loader/src/cp0regdef.h new file mode 100644 index 0000000000..ebab9d02b1 --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/cp0regdef.h @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle + * + * Copyright (C) 2001, Monta Vista Software + * Author: jsun@mvista.com or jsun@junsun.net + */ +#ifndef _cp0regdef_h_ +#define _cp0regdef_h_ + +#define CP0_INDEX $0 +#define CP0_RANDOM $1 +#define CP0_ENTRYLO0 $2 +#define CP0_ENTRYLO1 $3 +#define CP0_CONTEXT $4 +#define CP0_PAGEMASK $5 +#define CP0_WIRED $6 +#define CP0_BADVADDR $8 +#define CP0_COUNT $9 +#define CP0_ENTRYHI $10 +#define CP0_COMPARE $11 +#define CP0_STATUS $12 +#define CP0_CAUSE $13 +#define CP0_EPC $14 +#define CP0_PRID $15 +#define CP0_CONFIG $16 +#define CP0_LLADDR $17 +#define CP0_WATCHLO $18 +#define CP0_WATCHHI $19 +#define CP0_XCONTEXT $20 +#define CP0_FRAMEMASK $21 +#define CP0_DIAGNOSTIC $22 +#define CP0_PERFORMANCE $25 +#define CP0_ECC $26 +#define CP0_CACHEERR $27 +#define CP0_TAGLO $28 +#define CP0_TAGHI $29 +#define CP0_ERROREPC $30 + +#define read_32bit_c0_register(reg,sel) \ +({ int __res; \ + if (sel == 0) \ + __asm__ __volatile__( \ + "mfc0\t%0, " #reg "\n\t" \ + : "=r" (__res)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "mfc0\t%0, " #reg ", " #sel "\n\t" \ + ".set mips0\n\t" \ + : "=r" (__res)); \ + __res; \ +}) + +#endif diff --git a/target/linux/bmips/image/lzma-loader/src/head.S b/target/linux/bmips/image/lzma-loader/src/head.S new file mode 100644 index 0000000000..7977e0b53f --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/head.S @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards + * + * Copyright (C) 2011 Gabor Juhos + * + * Some parts of this code was based on the OpenWrt specific lzma-loader + * for the BCM47xx and ADM5120 based boards: + * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) + * Copyright (C) 2005 by Oleg I. Vdovikin + */ + +#include +#include +#include "cp0regdef.h" +#include "cacheops.h" +#include "config.h" + +#define KSEG0 0x80000000 + + .macro ehb + sll zero, 3 + .endm + + .text + +LEAF(startup) + .set noreorder + .set mips32 + + mtc0 zero, CP0_WATCHLO # clear watch registers + mtc0 zero, CP0_WATCHHI + mtc0 zero, CP0_CAUSE # clear before writing status register + + mfc0 t0, CP0_STATUS + li t1, 0x1000001f + or t0, t1 + xori t0, 0x1f + mtc0 t0, CP0_STATUS + ehb + + mtc0 zero, CP0_COUNT + mtc0 zero, CP0_COMPARE + ehb + + la t0, __reloc_label # get linked address of label + bal __reloc_label # branch and link to label to + nop # get actual address +__reloc_label: + subu t0, ra, t0 # get reloc_delta + + beqz t0, __reloc_done # if delta is 0 we are in the right place + nop + + /* Copy our code to the right place */ + la t1, _code_start # get linked address of _code_start + la t2, _code_end # get linked address of _code_end + addu t0, t0, t1 # calculate actual address of _code_start + +__reloc_copy: + lw t3, 0(t0) + sw t3, 0(t1) + add t1, 4 + blt t1, t2, __reloc_copy + add t0, 4 + + /* flush cache */ + la t0, _code_start + la t1, _code_end + + li t2, ~(CONFIG_CACHELINE_SIZE - 1) + and t0, t2 + and t1, t2 + li t2, CONFIG_CACHELINE_SIZE + + b __flush_check + nop + +__flush_line: + cache Hit_Writeback_Inv_D, 0(t0) + cache Hit_Invalidate_I, 0(t0) + add t0, t2 + +__flush_check: + bne t0, t1, __flush_line + nop + + sync + +__reloc_done: + + /* clear bss */ + la t0, _bss_start + la t1, _bss_end + b __bss_check + nop + +__bss_fill: + sw zero, 0(t0) + addi t0, 4 + +__bss_check: + bne t0, t1, __bss_fill + nop + + /* Setup new "C" stack */ + la sp, _stack + + /* reserve stack space for a0-a3 registers */ + subu sp, 16 + + /* jump to the decompressor routine */ + la t0, loader_main + jr t0 + nop + + .set reorder +END(startup) diff --git a/target/linux/bmips/image/lzma-loader/src/loader.c b/target/linux/bmips/image/lzma-loader/src/loader.c new file mode 100644 index 0000000000..8e0a48ecee --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/loader.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards + * + * Copyright (C) 2011 Gabor Juhos + * + * Some parts of this code was based on the OpenWrt specific lzma-loader + * for the BCM47xx and ADM5120 based boards: + * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) + * Copyright (C) 2005 Mineharu Takahara + * Copyright (C) 2005 by Oleg I. Vdovikin + * + * The image_header structure has been taken from the U-Boot project. + * (C) Copyright 2008 Semihalf + * (C) Copyright 2000-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + */ + +#include +#include + +#include "config.h" +#include "cache.h" +#include "printf.h" +#include "LzmaDecode.h" + +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 + +#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) + +#undef LZMA_DEBUG + +#ifdef LZMA_DEBUG +# define DBG(f, a...) printf(f, ## a) +#else +# define DBG(f, a...) do {} while (0) +#endif + +/* beyond the image end, size not known in advance */ +extern unsigned char workspace[]; + + +static CLzmaDecoderState lzma_state; +static unsigned char *lzma_data; +static unsigned long lzma_datasize; +static unsigned long lzma_outsize; +static unsigned long kernel_la; + +static void halt(void) +{ + printf("\nSystem halted!\n"); + for(;;); +} + +static __inline__ unsigned char lzma_get_byte(void) +{ + unsigned char c; + + lzma_datasize--; + c = *lzma_data++; + + return c; +} + +static int lzma_init_props(void) +{ + unsigned char props[LZMA_PROPERTIES_SIZE]; + int res; + int i; + + /* read lzma properties */ + for (i = 0; i < LZMA_PROPERTIES_SIZE; i++) + props[i] = lzma_get_byte(); + + /* read the lower half of uncompressed size in the header */ + lzma_outsize = ((SizeT) lzma_get_byte()) + + ((SizeT) lzma_get_byte() << 8) + + ((SizeT) lzma_get_byte() << 16) + + ((SizeT) lzma_get_byte() << 24); + + /* skip rest of the header (upper half of uncompressed size) */ + for (i = 0; i < 4; i++) + lzma_get_byte(); + + res = LzmaDecodeProperties(&lzma_state.Properties, props, + LZMA_PROPERTIES_SIZE); + return res; +} + +static int lzma_decompress(unsigned char *outStream) +{ + SizeT ip, op; + int ret; + + lzma_state.Probs = (CProb *) workspace; + + ret = LzmaDecode(&lzma_state, lzma_data, lzma_datasize, &ip, outStream, + lzma_outsize, &op); + + if (ret != LZMA_RESULT_OK) { + int i; + + DBG("LzmaDecode error %d at %08x, osize:%d ip:%d op:%d\n", + ret, lzma_data + ip, lzma_outsize, ip, op); + + for (i = 0; i < 16; i++) + DBG("%02x ", lzma_data[ip + i]); + + DBG("\n"); + } + + return ret; +} + +static void lzma_init_data(void) +{ + extern unsigned char _lzma_data_start[]; + extern unsigned char _lzma_data_end[]; + + kernel_la = LOADADDR; + lzma_data = _lzma_data_start; + lzma_datasize = _lzma_data_end - _lzma_data_start; +} + +void loader_main(unsigned long reg_a0, unsigned long reg_a1, + unsigned long reg_a2, unsigned long reg_a3) +{ + void (*kernel_entry) (unsigned long, unsigned long, unsigned long, + unsigned long); + int res; + + printf("\n\nOpenWrt kernel loader for BMIPS\n"); + printf("Copyright (C) 2011 Gabor Juhos \n"); + printf("Copyright (C) 2014 Jonas Gorski \n"); + printf("Copyright (C) 2020 Alvaro Fernandez Rojas \n"); + + lzma_init_data(); + + res = lzma_init_props(); + if (res != LZMA_RESULT_OK) { + printf("Incorrect LZMA stream properties!\n"); + halt(); + } + + printf("Decompressing kernel... "); + + res = lzma_decompress((unsigned char *) kernel_la); + if (res != LZMA_RESULT_OK) { + printf("failed, "); + switch (res) { + case LZMA_RESULT_DATA_ERROR: + printf("data error!\n"); + break; + default: + printf("unknown error %d!\n", res); + } + halt(); + } else { + printf("done!\n"); + } + + flush_cache(kernel_la, lzma_outsize); + + printf("Starting kernel at %08x...\n\n", kernel_la); + + kernel_entry = (void *) kernel_la; + kernel_entry(reg_a0, reg_a1, reg_a2, reg_a3); +} diff --git a/target/linux/bmips/image/lzma-loader/src/loader.lds b/target/linux/bmips/image/lzma-loader/src/loader.lds new file mode 100644 index 0000000000..bd444acf13 --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/loader.lds @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +OUTPUT_ARCH(mips) +SECTIONS { + .text : { + _code_start = .; + *(.text) + *(.text.*) + *(.rodata) + *(.rodata.*) + *(.data.lzma) + } + + . = ALIGN(32); + .data : { + *(.data) + *(.data.*) + } + + . = ALIGN(32); + _code_end = .; + + _bss_start = .; + .bss : { + *(.bss) + *(.bss.*) + } + + . = ALIGN(32); + _bss_end = .; + + . = . + 8192; + _stack = .; + + workspace = .; +} diff --git a/target/linux/bmips/image/lzma-loader/src/loader2.lds b/target/linux/bmips/image/lzma-loader/src/loader2.lds new file mode 100644 index 0000000000..d17bb2132e --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/loader2.lds @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +OUTPUT_ARCH(mips) +SECTIONS { + .text : { + startup = .; + *(.text) + *(.text.*) + *(.data) + *(.data.*) + } +} diff --git a/target/linux/bmips/image/lzma-loader/src/lzma-data.lds b/target/linux/bmips/image/lzma-loader/src/lzma-data.lds new file mode 100644 index 0000000000..83a1d5886a --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/lzma-data.lds @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +OUTPUT_ARCH(mips) +SECTIONS { + .data.lzma : { + _lzma_data_start = .; + *(.data) + _lzma_data_end = .; + } +} diff --git a/target/linux/bmips/image/lzma-loader/src/printf.c b/target/linux/bmips/image/lzma-loader/src/printf.c new file mode 100644 index 0000000000..15ee1790fb --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/printf.c @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + */ + +#include "printf.h" + +extern void board_putc(int ch); + +/* this is the maximum width for a variable */ +#define LP_MAX_BUF 256 + +/* macros */ +#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') ) +#define Ctod(x) ( (x) - '0') + +/* forward declaration */ +static int PrintChar(char *, char, int, int); +static int PrintString(char *, char *, int, int); +static int PrintNum(char *, unsigned long, int, int, int, int, char, int); + +/* private variable */ +static const char theFatalMsg[] = "fatal error in lp_Print!"; + +/* -*- + * A low level printf() function. + */ +static void +lp_Print(void (*output)(void *, char *, int), + void * arg, + char *fmt, + va_list ap) +{ + +#define OUTPUT(arg, s, l) \ + { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \ + (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \ + } else { \ + (*output)(arg, s, l); \ + } \ + } + + char buf[LP_MAX_BUF]; + + char c; + char *s; + long int num; + + int longFlag; + int negFlag; + int width; + int prec; + int ladjust; + char padc; + + int length; + + for(;;) { + { + /* scan for the next '%' */ + char *fmtStart = fmt; + while ( (*fmt != '\0') && (*fmt != '%')) { + fmt ++; + } + + /* flush the string found so far */ + OUTPUT(arg, fmtStart, fmt-fmtStart); + + /* are we hitting the end? */ + if (*fmt == '\0') break; + } + + /* we found a '%' */ + fmt ++; + + /* check for long */ + if (*fmt == 'l') { + longFlag = 1; + fmt ++; + } else { + longFlag = 0; + } + + /* check for other prefixes */ + width = 0; + prec = -1; + ladjust = 0; + padc = ' '; + + if (*fmt == '-') { + ladjust = 1; + fmt ++; + } + + if (*fmt == '0') { + padc = '0'; + fmt++; + } + + if (IsDigit(*fmt)) { + while (IsDigit(*fmt)) { + width = 10 * width + Ctod(*fmt++); + } + } + + if (*fmt == '.') { + fmt ++; + if (IsDigit(*fmt)) { + prec = 0; + while (IsDigit(*fmt)) { + prec = prec*10 + Ctod(*fmt++); + } + } + } + + + /* check format flag */ + negFlag = 0; + switch (*fmt) { + case 'b': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'd': + case 'D': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + if (num < 0) { + num = - num; + negFlag = 1; + } + length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'o': + case 'O': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'u': + case 'U': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'x': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'X': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1); + OUTPUT(arg, buf, length); + break; + + case 'c': + c = (char)va_arg(ap, int); + length = PrintChar(buf, c, width, ladjust); + OUTPUT(arg, buf, length); + break; + + case 's': + s = (char*)va_arg(ap, char *); + length = PrintString(buf, s, width, ladjust); + OUTPUT(arg, buf, length); + break; + + case '\0': + fmt --; + break; + + default: + /* output this char as it is */ + OUTPUT(arg, fmt, 1); + } /* switch (*fmt) */ + + fmt ++; + } /* for(;;) */ + + /* special termination call */ + OUTPUT(arg, "\0", 1); +} + + +/* --------------- local help functions --------------------- */ +static int +PrintChar(char * buf, char c, int length, int ladjust) +{ + int i; + + if (length < 1) length = 1; + if (ladjust) { + *buf = c; + for (i=1; i< length; i++) buf[i] = ' '; + } else { + for (i=0; i< length-1; i++) buf[i] = ' '; + buf[length - 1] = c; + } + return length; +} + +static int +PrintString(char * buf, char* s, int length, int ladjust) +{ + int i; + int len=0; + char* s1 = s; + while (*s1++) len++; + if (length < len) length = len; + + if (ladjust) { + for (i=0; i< len; i++) buf[i] = s[i]; + for (i=len; i< length; i++) buf[i] = ' '; + } else { + for (i=0; i< length-len; i++) buf[i] = ' '; + for (i=length-len; i < length; i++) buf[i] = s[i-length+len]; + } + return length; +} + +static int +PrintNum(char * buf, unsigned long u, int base, int negFlag, + int length, int ladjust, char padc, int upcase) +{ + /* algorithm : + * 1. prints the number from left to right in reverse form. + * 2. fill the remaining spaces with padc if length is longer than + * the actual length + * TRICKY : if left adjusted, no "0" padding. + * if negtive, insert "0" padding between "0" and number. + * 3. if (!ladjust) we reverse the whole string including paddings + * 4. otherwise we only reverse the actual string representing the num. + */ + + int actualLength =0; + char *p = buf; + int i; + + do { + int tmp = u %base; + if (tmp <= 9) { + *p++ = '0' + tmp; + } else if (upcase) { + *p++ = 'A' + tmp - 10; + } else { + *p++ = 'a' + tmp - 10; + } + u /= base; + } while (u != 0); + + if (negFlag) { + *p++ = '-'; + } + + /* figure out actual length and adjust the maximum length */ + actualLength = p - buf; + if (length < actualLength) length = actualLength; + + /* add padding */ + if (ladjust) { + padc = ' '; + } + if (negFlag && !ladjust && (padc == '0')) { + for (i = actualLength-1; i< length-1; i++) buf[i] = padc; + buf[length -1] = '-'; + } else { + for (i = actualLength; i< length; i++) buf[i] = padc; + } + + + /* prepare to reverse the string */ + { + int begin = 0; + int end; + if (ladjust) { + end = actualLength - 1; + } else { + end = length -1; + } + + while (end > begin) { + char tmp = buf[begin]; + buf[begin] = buf[end]; + buf[end] = tmp; + begin ++; + end --; + } + } + + /* adjust the string pointer */ + return length; +} + +static void printf_output(void *arg, char *s, int l) +{ + int i; + + // special termination call + if ((l==1) && (s[0] == '\0')) return; + + for (i=0; i< l; i++) { + board_putc(s[i]); + if (s[i] == '\n') board_putc('\r'); + } +} + +void printf(char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + lp_Print(printf_output, 0, fmt, ap); + va_end(ap); +} diff --git a/target/linux/bmips/image/lzma-loader/src/printf.h b/target/linux/bmips/image/lzma-loader/src/printf.h new file mode 100644 index 0000000000..8a86a560ae --- /dev/null +++ b/target/linux/bmips/image/lzma-loader/src/printf.h @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + */ + +#ifndef _printf_h_ +#define _printf_h_ + +#include +void printf(char *fmt, ...); + +#endif /* _printf_h_ */ -- cgit v1.2.3