From e7bfda2c243e66a75ff966ba04c28b1590b5d24c Mon Sep 17 00:00:00 2001
From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Sat, 8 Feb 2020 20:33:30 +0100
Subject: brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 .../patches-4.19/567-board_dsl-2751b_e1.patch      | 93 ++++++++++++++++++++++
 1 file changed, 93 insertions(+)
 create mode 100644 target/linux/bcm63xx/patches-4.19/567-board_dsl-2751b_e1.patch

(limited to 'target/linux/bcm63xx/patches-4.19/567-board_dsl-2751b_e1.patch')

diff --git a/target/linux/bcm63xx/patches-4.19/567-board_dsl-2751b_e1.patch b/target/linux/bcm63xx/patches-4.19/567-board_dsl-2751b_e1.patch
new file mode 100644
index 0000000000..b7e155de55
--- /dev/null
+++ b/target/linux/bcm63xx/patches-4.19/567-board_dsl-2751b_e1.patch
@@ -0,0 +1,93 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -142,6 +142,74 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
++	{ .offset = 96, .value = 0x2046 },
++	{ .offset = 97, .value = 0xfe9d },
++	{ .offset = 98, .value = 0x1854 },
++	{ .offset = 99, .value = 0xfa59 },
++	{ .offset = 112, .value = 0x2046 },
++	{ .offset = 113, .value = 0xfe79 },
++	{ .offset = 114, .value = 0x17f5 },
++	{ .offset = 115, .value = 0xfa47 },
++	{ .offset = 161, .value = 0x2222 },
++	{ .offset = 162, .value = 0x2222 },
++	{ .offset = 169, .value = 0x2222 },
++	{ .offset = 170, .value = 0x2222 },
++	{ .offset = 171, .value = 0x5555 },
++	{ .offset = 172, .value = 0x5555 },
++	{ .offset = 173, .value = 0x4444 },
++	{ .offset = 174, .value = 0x4444 },
++	{ .offset = 175, .value = 0x5555 },
++	{ .offset = 176, .value = 0x5555 },
++};
++
++static struct board_info __initdata board_dsl_2751b_d1 = {
++	.name				= "AW5200B",
++	.expected_cpu_id		= 0x6318,
++
++	.has_pci			= 1,
++	.use_fallback_sprom		= 1,
++
++	.has_enetsw			= 1,
++
++	.has_ohci0			= 1,
++	.has_ehci0			= 1,
++	.num_usbh_ports			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id = 1,
++				.name	= "Port 1",
++			},
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "Port 2",
++			},
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "Port 3",
++			},
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "Port 4",
++			},
++		},
++	},
++
++	.fallback_sprom = {
++		.type 				= SPROM_BCM43217,
++		.pci_bus			= 1,
++		.pci_dev			= 0,
++		.board_fixups			= dsl2751b_e1_fixups,
++		.num_board_fixups		= ARRAY_SIZE(dsl2751b_e1_fixups),
++	},
++};
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ 
+ /*
+@@ -1989,6 +2057,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6318
+ 	&board_96318ref,
+ 	&board_96318ref_p300,
++	&board_dsl_2751b_d1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
+@@ -2082,6 +2151,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6318
+ 	{ .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
+ 	{ .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
++	{ .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	{ .compatible = "adb,a4001n", .data = &board_A4001N, },
-- 
cgit v1.2.3