From e7bfda2c243e66a75ff966ba04c28b1590b5d24c Mon Sep 17 00:00:00 2001
From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Sat, 8 Feb 2020 20:33:30 +0100
Subject: brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 target/linux/bcm63xx/dts/bcm6328.dtsi | 199 ++++++++++++++++++++++++++++++++++
 1 file changed, 199 insertions(+)
 create mode 100644 target/linux/bcm63xx/dts/bcm6328.dtsi

(limited to 'target/linux/bcm63xx/dts/bcm6328.dtsi')

diff --git a/target/linux/bcm63xx/dts/bcm6328.dtsi b/target/linux/bcm63xx/dts/bcm6328.dtsi
new file mode 100644
index 0000000000..d08b6bab7a
--- /dev/null
+++ b/target/linux/bcm63xx/dts/bcm6328.dtsi
@@ -0,0 +1,199 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6328";
+
+	aliases {
+		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi1 = &hsspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	memory { device_type = "memory"; reg = <0 0>; };
+
+	ubus@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&periph_intc>;
+
+		ext_intc: interrupt-controller@10000018 {
+			compatible = "brcm,bcm6345-ext-intc";
+			reg = <0x10000018 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <24>, <25>, <26>, <27>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+		};
+
+		pinctrl: pin-controller@10000080 {
+			compatible = "brcm,bcm6328-pinctrl";
+			reg = <0x10000080 0x8>,
+			      <0x10000088 0x8>,
+			      <0x10000098 0x4>,
+			      <0x1000009c 0xc>;
+			reg-names = "dirout", "dat", "mode", "mux";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-parent = <&ext_intc>;
+			interrupts = <3 0>, <2 0>, <0 0>, <1 0>;
+			interrupt-names = "gpio12", "gpio15",
+					  "gpio23", "gpio24";
+
+			pinctrl_serial_led: serial_led {
+				pinctrl_serial_led_data: serial_led_data {
+					function = "serial_led_data";
+					pins = "gpio6";
+				};
+
+				pinctrl_serial_led_clk: serial_led_clk {
+					function = "serial_led_clk";
+					pins = "gpio7";
+				};
+			};
+
+			pinctrl_inet_act_led: inet_act_led {
+				function = "inet_act_led";
+				pins = "gpio11";
+			};
+
+			pinctrl_pcie_clkreq: pcie_clkreq {
+				function = "pcie_clkreq";
+				pins = "gpio16";
+			};
+
+			pinctrl_ephy0_spd_led: ephy0_spd_led {
+				function = "led";
+				pins = "gpio17";
+			};
+
+			pinctrl_ephy1_spd_led: ephy1_spd_led {
+				function = "led";
+				pins = "gpio18";
+			};
+
+			pinctrl_ephy2_spd_led: ephy2_spd_led {
+				function = "led";
+				pins = "gpio19";
+			};
+
+			pinctrl_ephy3_spd_led: ephy3_spd_led {
+				function = "led";
+				pins = "gpio20";
+			};
+
+			pinctrl_ephy0_act_led: ephy0_act_led {
+				function = "ephy0_act_led";
+				pins = "gpio25";
+			};
+
+			pinctrl_ephy1_act_led: ephy1_act_led {
+				function = "ephy1_act_led";
+				pins = "gpio26";
+			};
+
+			pinctrl_ephy2_act_led: ephy2_act_led {
+				function = "ephy2_act_led";
+				pins = "gpio27";
+			};
+
+			pinctrl_ephy3_act_led: ephy3_act_led {
+				function = "ephy3_act_led";
+				pins = "gpio28";
+			};
+
+			pinctrl_hsspi_cs1: hsspi_cs1 {
+				function = "hsspi_cs1";
+				pins = "hsspi_cs1";
+			};
+
+			pinctrl_usb_port1_device: usb_port1_device {
+				function = "usb_device_port";
+				pins = "usb_port1";
+			};
+
+			pinctrl_usb_port1_host: usb_port1_host {
+				function = "usb_host_port";
+				pins = "usb_port1";
+			};
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <28>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <39>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		leds: led-controller@10000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10000800 0x24>;
+			status = "disabled";
+		};
+
+		hsspi: spi@10001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-hsspi";
+			reg = <0x10001000 0x600>;
+			interrupts = <29>;
+			/* clocks = <&clkctl 9>; */
+		};
+	};
+};
-- 
cgit v1.2.3