From e7bfda2c243e66a75ff966ba04c28b1590b5d24c Mon Sep 17 00:00:00 2001
From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Sat, 8 Feb 2020 20:33:30 +0100
Subject: brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 .../linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts | 113 +++++++++++++++++++++
 1 file changed, 113 insertions(+)
 create mode 100644 target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts

(limited to 'target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts')

diff --git a/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts b/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts
new file mode 100644
index 0000000000..5084bd8877
--- /dev/null
+++ b/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts
@@ -0,0 +1,113 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "NuCom R5010UN v2";
+	compatible = "nucom,r5010un-v2", "brcm,bcm6328";
+
+	chosen {
+		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 23 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 24 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		inet_green {
+			label = "R5010UNv2:green:inet";
+			gpios = <&pinctrl 1 1>;
+		};
+		inet_fail_red {
+			label = "R5010UNv2:red:inet-fail";
+			gpios = <&pinctrl 2 1>;
+		};
+		dsl_red {
+			label = "R5010UNv2:green:dsl";
+			gpios = <&pinctrl 3 1>;
+		};
+		power_green {
+			label = "R5010UNv2:green:power";
+			gpios = <&pinctrl 4 1>;
+			default-state = "on";
+		};
+		power_fail_red {
+			label = "R5010UNv2:red:power-fail";
+			gpios = <&pinctrl 5 1>;
+		};
+		wps_green {
+			label = "R5010UNv2:green:wps";
+			gpios = <&pinctrl 10 1>;
+		};
+		usb_green {
+			label = "R5010UNv2:green:usb";
+			gpios = <&pinctrl 11 1>;
+		};
+	};
+};
+
+&hsspi {
+	status = "ok";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <16666667>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cfe@0 {
+				reg = <0x000000 0x010000>;
+				label = "cfe";
+				read-only;
+			};
+
+			linux@10000 {
+				reg = <0x010000 0x7e0000>;
+				label = "linux";
+				compatible = "brcm,bcm963xx-imagetag";
+			};
+
+			nvram@7f0000 {
+				reg = <0x7f0000 0x010000>;
+				label = "nvram";
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "ok";
+};
-- 
cgit v1.2.3