From e7bfda2c243e66a75ff966ba04c28b1590b5d24c Mon Sep 17 00:00:00 2001
From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Sat, 8 Feb 2020 20:33:30 +0100
Subject: brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 target/linux/bcm63xx/dts/bcm6318.dtsi | 200 ++++++++++++++++++++++++++++++++++
 1 file changed, 200 insertions(+)
 create mode 100644 target/linux/bcm63xx/dts/bcm6318.dtsi

(limited to 'target/linux/bcm63xx/dts/bcm6318.dtsi')

diff --git a/target/linux/bcm63xx/dts/bcm6318.dtsi b/target/linux/bcm63xx/dts/bcm6318.dtsi
new file mode 100644
index 0000000000..a902c1bd57
--- /dev/null
+++ b/target/linux/bcm63xx/dts/bcm6318.dtsi
@@ -0,0 +1,200 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6318";
+
+	aliases {
+		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		spi1 = &hsspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "brcm,bmips3300", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	memory { device_type = "memory"; reg = <0 0>; };
+
+	ubus@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&periph_intc>;
+
+		ext_intc: interrupt-controller@10000018 {
+			compatible = "brcm,bcm6318-ext-intc";
+			reg = <0x10000018 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <24>, <25>, <26>, <27>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x20>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+		};
+
+		pinctrl: pin-controller@10000080 {
+			compatible = "brcm,bcm6318-pinctrl";
+			reg = <0x10000080 0x08>,
+			      <0x10000088 0x08>,
+			      <0x10000098 0x04>,
+			      <0x1000009c 0x0c>,
+			      <0x100000d4 0x18>;
+			reg-names = "dirout", "dat", "mode", "mux", "pad";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-parent = <&ext_intc>;
+			interrupts = <0 0>, <1 0>;
+			interrupt-names = "gpio33", "gpio34";
+
+			pinctrl_ephy0_spd_led: ephy0_spd_led {
+				function = "ephy0_spd_led";
+				pins = "gpio0";
+			};
+
+			pinctrl_ephy1_spd_led: ephy1_spd_led {
+				function = "ephy1_spd_led";
+				pins = "gpio1";
+			};
+
+			pinctrl_ephy2_spd_led: ephy2_spd_led {
+				function = "ephy2_spd_led";
+				pins = "gpio2";
+			};
+
+			pinctrl_ephy3_spd_led: ephy3_spd_led {
+				function = "ephy3_spd_led";
+				pins = "gpio3";
+			};
+
+			pinctrl_ephy0_act_led: ephy0_act_led {
+				function = "ephy0_act_led";
+				pins = "gpio4";
+			};
+
+			pinctrl_ephy1_act_led: ephy1_act_led {
+				function = "ephy1_act_led";
+				pins = "gpio5";
+			};
+
+			pinctrl_ephy2_act_led: ephy2_act_led {
+				function = "ephy2_act_led";
+				pins = "gpio6";
+			};
+
+			pinctrl_ephy3_act_led: ephy3_act_led {
+				function = "ephy3_act_led";
+				pins = "gpio7";
+			};
+
+			pinctrl_serial_led: serial_led {
+				pinctrl_serial_led_data: serial_led_data {
+					function = "serial_led_data";
+					pins = "gpio6";
+				};
+
+				pinctrl_serial_led_clk: serial_led_clk {
+					function = "serial_led_clk";
+					pins = "gpio7";
+				};
+			};
+
+			pinctrl_inet_act_led: inet_act_led {
+				function = "inet_act_led";
+				pins = "gpio8";
+			};
+
+			pinctrl_inet_fail_led: inet_fail_led {
+				function = "inet_fail_led";
+				pins = "gpio9";
+			};
+
+			pinctrl_dsl_led: dsl_led {
+				function = "dsl_led";
+				pins = "gpio10";
+			};
+
+			pinctrl_post_fail_led: post_fail_led {
+				function = "post_fail_led";
+				pins = "gpio11";
+			};
+
+			pinctrl_wlan_wps_led: wlan_wps_led {
+				function = "wlan_wps_led";
+				pins = "gpio12";
+			};
+
+			pinctrl_usb_pwron: usb_pwron {
+				function = "usb_pwron";
+				pins = "gpio13";
+			};
+
+			pinctrl_usb_device_led: usb_device_led {
+				function = "usb_device_led";
+				pins = "gpio13";
+			};
+
+			pinctrl_usb_active: usb_active {
+				function = "usb_active";
+				pins = "gpio40";
+			};
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <28>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		leds: led-controller@10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10000200 0x24>;
+			status = "disabled";
+		};
+
+		hsspi: spi@10003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-hsspi";
+			reg = <0x10003000 0x600>;
+			interrupts = <29>;
+			/* clocks = <&clkctl 25>; */
+		};
+	};
+};
-- 
cgit v1.2.3