From ff2c96333f418c0c06ebf0bd947b449f579dda7c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= Date: Sun, 7 Jun 2020 10:55:56 +0200 Subject: bcm63xx: add support for the Sercomm H500-s MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sercomm H500-s is an xDSL dual band wireless router based on Broadcom BCM63167 SoC. Hardware: SoC: Broadcom BCM63167 CPU: BMIPS4350 V8.0, 400 MHz, 2 cores Flash: NAND 128 MiB RAM: DDR3 128 MiB Ethernet: 4x 10/100/1000 Mbps Switch: BCM53134S Wireless: 802.11b/g/n: BCM435f (integrated) 802.11ac: Quantenna QT3740BC (onboard SoC) USB: 1x 2.0 LEDs/Buttons: 11x / 2x Flash instruction, web UI: 1. Reset to defaults using the reset button if the admin password is unknown 2. Login into the web UI as admin. Address: http://192.168.0.1 User: admin Password: VF-ESVodafone-H-500-s or l033i-h500s 3. Go to Settings -> Firmware Update, and select the Openwrt factory firmware 4. Update the firmware. 5. Wait until it finish, the device will reboot with Openwrt installed on the alternative image partitions keeping the stock firmware in the former. Notes: - The patch also adds support for the lowi version. Only the factory firmware is different. - The integrated Wifi in the Broadcom Soc isn't still supported. - The Quantenna 802.11ac wifi works ok, but needs to be configured with the Quantenna client application. It can't be configured with Luci nor any iw command since it's a separated subsystem linked via ethernet. - The BCM53134S external switch is managed via MDIO which isn't supported in this target. Therefore it will behave as a dumb switch. Signed-off-by: Daniel González Cabanelas --- target/linux/bcm63xx/base-files/etc/board.d/01_leds | 4 ++++ target/linux/bcm63xx/base-files/etc/board.d/02_network | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'target/linux/bcm63xx/base-files/etc') diff --git a/target/linux/bcm63xx/base-files/etc/board.d/01_leds b/target/linux/bcm63xx/base-files/etc/board.d/01_leds index 91d67f0c0b..cdaf0e77c9 100755 --- a/target/linux/bcm63xx/base-files/etc/board.d/01_leds +++ b/target/linux/bcm63xx/base-files/etc/board.d/01_leds @@ -100,6 +100,10 @@ sercomm,ad1018) sercomm,ad1018-nor) ucidef_set_led_netdev "wlan0" "WLAN" "AD1018:green:wifi" "wlan0" ;; +sercomm,h500-s-lowi|\ +sercomm,h500-s-vfes) + ucidef_set_led_netdev "wan" "WAN" "h500-s:green:internet" "eth0.2" + ;; telsey,cpva502plus) ucidef_set_led_netdev "lan" "LAN" "CPVA502+:amber:link" "eth0" ;; diff --git a/target/linux/bcm63xx/base-files/etc/board.d/02_network b/target/linux/bcm63xx/base-files/etc/board.d/02_network index 784af29cb4..f02eabe68f 100755 --- a/target/linux/bcm63xx/base-files/etc/board.d/02_network +++ b/target/linux/bcm63xx/base-files/etc/board.d/02_network @@ -142,6 +142,10 @@ sercomm,ad1018-nor) ucidef_add_switch "switch0" \ "1:lan:3" "2:lan:2" "3:lan:1" "0:wan" "8t@eth0" ;; +sercomm,h500-s-lowi|\ +sercomm,h500-s-vfes) + ucidef_add_switch "switch0" "4:lan" "3:wan" "8t@eth0" + ;; sfr,neufbox-6-sercomm-r0) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9t@eth0" -- cgit v1.2.3