From ea6d10d572ed819bb272d214bfbeeca32d9ea3ae Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sun, 15 Jan 2017 22:52:24 +0100 Subject: bcm53xx: add pending BCM5301X patches: Netgear R8000 WiFi & Luxul DTS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This specifies wireless limitations for Netgear R8000 making sure people won't use channels incorrectly (limited performance). There are also 2 new DTS files not used by us yet. Signed-off-by: Rafał Miłecki --- ...03-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch | 133 +++++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 target/linux/bcm53xx/patches-4.4/130-0003-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch (limited to 'target/linux/bcm53xx/patches-4.4/130-0003-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch') diff --git a/target/linux/bcm53xx/patches-4.4/130-0003-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch b/target/linux/bcm53xx/patches-4.4/130-0003-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch new file mode 100644 index 0000000000..ba1907c000 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/130-0003-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch @@ -0,0 +1,133 @@ +From: Dan Haab +Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-1200 + +Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial +flash (for bootloader and NVRAM) and NAND flash (for firmware). + +Signed-off-by: Dan Haab +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 ++++++++++++++++++++++++++ + 2 files changed, 108 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm47081-buffalo-wzr-600dhp2.dtb \ + bcm47081-buffalo-wzr-900dhp.dtb \ + bcm47081-luxul-xap-1410.dtb \ ++ bcm47081-luxul-xwr-1200.dtb \ + bcm4709-asus-rt-ac87u.dtb \ + bcm4709-buffalo-wxr-1900dhp.dtb \ + bcm4709-netgear-r7000.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +@@ -0,0 +1,107 @@ ++/* ++ * Copyright 2017 Luxul Inc. ++ * ++ * Licensed under the ISC license. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm47081.dtsi" ++#include "bcm5301x-nand-cs0-bch4.dtsi" ++ ++/ { ++ compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708"; ++ model = "Luxul XWR-1200 V1"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200"; ++ }; ++ ++ memory { ++ reg = <0x00000000 0x08000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ power { ++ label = "bcm53xx:green:power"; ++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "default-on"; ++ }; ++ ++ lan3 { ++ label = "bcm53xx:green:lan3"; ++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "none"; ++ }; ++ ++ lan4 { ++ label = "bcm53xx:green:lan4"; ++ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "none"; ++ }; ++ ++ wan { ++ label = "bcm53xx:green:wan"; ++ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "none"; ++ }; ++ ++ lan2 { ++ label = "bcm53xx:green:lan2"; ++ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "none"; ++ }; ++ ++ usb { ++ label = "bcm53xx:green:usb"; ++ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "none"; ++ }; ++ ++ status { ++ label = "bcm53xx:green:status"; ++ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "timer"; ++ }; ++ ++ 2ghz { ++ label = "bcm53xx:green:2ghz"; ++ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "none"; ++ }; ++ ++ 5ghz { ++ label = "bcm53xx:green:5ghz"; ++ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "none"; ++ }; ++ ++ lan1 { ++ label = "bcm53xx:green:lan1"; ++ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "none"; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ restart { ++ label = "Reset"; ++ linux,code = ; ++ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&usb2 { ++ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; ++}; ++ ++&spi_nor { ++ status = "okay"; ++}; -- cgit v1.2.3