From 7fc9bb1acac85c3267eaa1263ae66dcd2c5fe65f Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 27 Oct 2014 23:02:08 +0000 Subject: bcm53xx: initial support for kernel 3.18 This adds initial support for kernel 3.18. Signed-off-by: Hauke Mehrtens SVN-Revision: 43097 --- ...-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch | 670 +++++++++++++++++++++ 1 file changed, 670 insertions(+) create mode 100644 target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch (limited to 'target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch') diff --git a/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch b/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch new file mode 100644 index 0000000000..9254089c95 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch @@ -0,0 +1,670 @@ +From cc2cda651fcbc498bf513a6b802dca19944bcb37 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Mon, 12 May 2014 11:55:20 +0200 +Subject: [PATCH 13/17] pcie2-bcma: add new PCIe2 driver for bcma + +This driver supports the PCIe controller found on the BCM4708 and +similar SoCs. The controller itself is automatically detected by bcma. + +Signed-off-by: Hauke Mehrtens +--- + arch/arm/mach-bcm/Kconfig | 2 + + drivers/pci/host/Kconfig | 7 + + drivers/pci/host/Makefile | 1 + + drivers/pci/host/pcie2-bcma.c | 591 ++++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 601 insertions(+) + create mode 100644 drivers/pci/host/pcie2-bcma.c + +--- a/arch/arm/mach-bcm/Kconfig ++++ b/arch/arm/mach-bcm/Kconfig +@@ -86,6 +86,7 @@ config ARCH_BCM_5301X + select HAVE_ARM_TWD if SMP + select ARM_GLOBAL_TIMER + select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK ++ select PCI_DOMAINS if PCI + help + Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores. + +--- a/drivers/pci/host/Kconfig ++++ b/drivers/pci/host/Kconfig +@@ -91,4 +91,11 @@ config PCI_XGENE + There are 5 internal PCIe ports available. Each port is GEN3 capable + and have varied lanes from x1 to x8. + ++config PCI_BCMA ++ bool "BCMA PCIe2 host controller" ++ depends on BCMA && OF ++ help ++ Say Y here if you want to support a simple generic PCI host ++ controller, such as the one emulated by kvmtool. ++ + endmenu +--- a/drivers/pci/host/Makefile ++++ b/drivers/pci/host/Makefile +@@ -11,3 +11,4 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spe + obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o + obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o + obj-$(CONFIG_PCI_XGENE) += pci-xgene.o ++obj-$(CONFIG_PCI_BCMA) += pcie2-bcma.o +--- /dev/null ++++ b/drivers/pci/host/pcie2-bcma.c +@@ -0,0 +1,619 @@ ++/* ++ * Northstar PCI-Express driver ++ * Only supports Root-Complex (RC) mode ++ * ++ * Notes: ++ * PCI Domains are being used to identify the PCIe port 1:1. ++ * ++ * Only MEM access is supported, PAX does not support IO. ++ * ++ * TODO: ++ * MSI interrupts, ++ * DRAM > 128 MBytes (e.g. DMA zones) ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define SI_ENUM_BASE 0x18000000 /* Enumeration space base */ ++ ++/* ++ * Register offset definitions ++ */ ++#define SOC_PCIE_CONTROL 0x000 /* a.k.a. CLK_CONTROL reg */ ++#define SOC_PCIE_PM_STATUS 0x008 ++#define SOC_PCIE_PM_CONTROL 0x00c /* in EP mode only ! */ ++ ++#define SOC_PCIE_EXT_CFG_ADDR 0x120 ++#define SOC_PCIE_EXT_CFG_DATA 0x124 ++#define SOC_PCIE_CFG_ADDR 0x1f8 ++#define SOC_PCIE_CFG_DATA 0x1fc ++ ++#define SOC_PCIE_SYS_RC_INTX_EN 0x330 ++#define SOC_PCIE_SYS_RC_INTX_CSR 0x334 ++#define SOC_PCIE_SYS_HOST_INTR_EN 0x344 ++#define SOC_PCIE_SYS_HOST_INTR_CSR 0x348 ++ ++#define SOC_PCIE_HDR_OFF 0x400 /* 256 bytes per function */ ++ ++/* 32-bit 4KB in-bound mapping windows for Function 0..3, n=0..7 */ ++#define SOC_PCIE_SYS_IMAP0(f, n) (0xc00 + ((f) << 9)((n) << 2)) ++/* 64-bit in-bound mapping windows for func 0..3 */ ++#define SOC_PCIE_SYS_IMAP1(f) (0xc80 + ((f) << 3)) ++#define SOC_PCIE_SYS_IMAP2(f) (0xcc0 + ((f) << 3)) ++/* 64-bit in-bound address range n=0..2 */ ++#define SOC_PCIE_SYS_IARR(n) (0xd00 + ((n) << 3)) ++/* 64-bit out-bound address filter n=0..2 */ ++#define SOC_PCIE_SYS_OARR(n) (0xd20 + ((n) << 3)) ++/* 64-bit out-bound mapping windows n=0..2 */ ++#define SOC_PCIE_SYS_OMAP(n) (0xd40 + ((n) << 3)) ++ ++#define BCM4360_D11AC_ID 0x43a0 ++#define BCM4360_D11AC2G_ID 0x43a1 ++#define BCM4360_D11AC5G_ID 0x43a2 ++#define BCM4352_D11AC_ID 0x43b1 /* 4352 802.11ac dualband device */ ++#define BCM4352_D11AC2G_ID 0x43b2 /* 4352 802.11ac 2.4G device */ ++#define BCM4352_D11AC5G_ID 0x43b3 /* 4352 802.11ac 5G device */ ++ ++static struct pci_ops bcma_pcie2_ops; ++ ++static int bcma_pcie2_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin) ++{ ++ struct pci_sys_data *sys = pdev->sysdata; ++ struct bcma_device *bdev = sys->private_data; ++ ++ return bdev->irq; ++} ++ ++static u32 bcma_pcie2_cfg_base(struct bcma_device *bdev, int busno, ++ unsigned int devfn, int where) ++{ ++ int slot = PCI_SLOT(devfn); ++ int fn = PCI_FUNC(devfn); ++ u32 addr_reg; ++ ++ if (busno == 0) { ++ if (slot >= 1) ++ return 0; ++ bcma_write32(bdev, SOC_PCIE_EXT_CFG_ADDR, where & 0xffc); ++ return SOC_PCIE_EXT_CFG_DATA; ++ } ++ if (fn > 1) ++ return 0; ++ addr_reg = (busno & 0xff) << 20 | (slot << 15) | (fn << 12) | ++ (where & 0xffc) | (1 & 0x3); ++ ++ bcma_write32(bdev, SOC_PCIE_CFG_ADDR, addr_reg); ++ return SOC_PCIE_CFG_DATA; ++} ++ ++static u32 bcma_pcie2_read_config(struct bcma_device *bdev, int busno, ++ unsigned int devfn, int where, int size) ++{ ++ u32 base; ++ u32 data_reg; ++ u32 mask; ++ int shift; ++ ++ base = bcma_pcie2_cfg_base(bdev, busno, devfn, where); ++ ++ if (!base) ++ return ~0UL; ++ ++ data_reg = bcma_read32(bdev, base); ++ ++ /* NS: CLASS field is R/O, and set to wrong 0x200 value */ ++ if (busno == 0 && devfn == 0) { ++ /* ++ * RC's class is 0x0280, but Linux PCI driver needs 0x604 ++ * for a PCIe bridge. So we must fixup the class code ++ * to 0x604 here. ++ */ ++ if ((where & 0xffc) == PCI_CLASS_REVISION) { ++ data_reg &= 0xff; ++ data_reg |= 0x604 << 16; ++ } ++ } ++ /* HEADER_TYPE=00 indicates the port in EP mode */ ++ ++ if (size == 4) ++ return data_reg; ++ ++ mask = (1 << (size * 8)) - 1; ++ shift = (where % 4) * 8; ++ return (data_reg >> shift) & mask; ++} ++ ++static void bcma_pcie2_write_config(struct bcma_device *bdev, int busno, ++ unsigned int devfn, int where, int size, ++ u32 val) ++{ ++ u32 base; ++ u32 data_reg; ++ ++ base = bcma_pcie2_cfg_base(bdev, busno, devfn, where); ++ ++ if (!base) ++ return; ++ ++ if (size < 4) { ++ u32 mask = (1 << (size * 8)) - 1; ++ int shift = (where % 4) * 8; ++ ++ data_reg = bcma_read32(bdev, base); ++ data_reg &= ~(mask << shift); ++ data_reg |= (val & mask) << shift; ++ } else { ++ data_reg = val; ++ } ++ ++ bcma_write32(bdev, base, data_reg); ++} ++ ++static u8 bcma_pcie2_read_config8(struct bcma_device *bdev, int busno, ++ unsigned int devfn, int where) ++{ ++ return bcma_pcie2_read_config(bdev, busno, devfn, where, 1); ++} ++ ++static u16 bcma_pcie2_read_config16(struct bcma_device *bdev, int busno, ++ unsigned int devfn, int where) ++{ ++ return bcma_pcie2_read_config(bdev, busno, devfn, where, 2); ++} ++ ++static u32 bcma_pcie2_read_config32(struct bcma_device *bdev, int busno, ++ unsigned int devfn, int where) ++{ ++ return bcma_pcie2_read_config(bdev, busno, devfn, where, 4); ++} ++ ++static void bcma_pcie2_write_config8(struct bcma_device *bdev, int busno, ++ unsigned int devfn, int where, u8 val) ++{ ++ return bcma_pcie2_write_config(bdev, busno, devfn, where, 1, val); ++} ++ ++static void bcma_pcie2_write_config16(struct bcma_device *bdev, int busno, ++ unsigned int devfn, int where, u16 val) ++{ ++ return bcma_pcie2_write_config(bdev, busno, devfn, where, 2, val); ++} ++ ++static void bcma_pcie2_write_config32(struct bcma_device *bdev, int busno, ++ unsigned int devfn, int where, u32 val) ++{ ++ return bcma_pcie2_write_config(bdev, busno, devfn, where, 4, val); ++} ++ ++static int bcma_pcie2_read_config_pci(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 *val) ++{ ++ struct pci_sys_data *sys = bus->sysdata; ++ struct bcma_device *bdev = sys->private_data; ++ ++ *val = bcma_pcie2_read_config(bdev, bus->number, devfn, where, size); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_pcie2_write_config_pci(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 val) ++{ ++ struct pci_sys_data *sys = bus->sysdata; ++ struct bcma_device *bdev = sys->private_data; ++ ++ bcma_pcie2_write_config(bdev, bus->number, devfn, where, size, val); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++/* ++ * Check link status, return 0 if link is up in RC mode, ++ * otherwise return non-zero ++ */ ++static int bcma_pcie2_check_link(struct bcma_device *bdev, ++ struct pci_sys_data *sys, u32 allow_gen2) ++{ ++ u32 devfn = 0; ++ u32 tmp32; ++ u16 tmp16; ++ u8 tmp8; ++ int pos; ++ bool link = false; ++ /* ++ * Setup callback (bcma_pcie2_setup) is called in pcibios_init_hw before ++ * creating bus root, so we don't have it here yet. On the other hand ++ * we really want to use pci_bus_find_capability helper to check NLW. ++ * Let's fake simple pci_bus just to query for capabilities. ++ */ ++ struct pci_bus bus = { ++ .number = 0, ++ .ops = &bcma_pcie2_ops, ++ .sysdata = sys, ++ }; ++ ++ tmp32 = bcma_pcie2_read_config32(bdev, 0, devfn, 0xdc); ++ tmp32 &= ~0xf; ++ if (allow_gen2) ++ tmp32 |= 2; ++ else { ++ /* force PCIE GEN1 */ ++ tmp32 |= 1; ++ } ++ bcma_pcie2_write_config32(bdev, 0, devfn, 0xdc, tmp32); ++ ++ /* See if the port is in EP mode, indicated by header type 00 */ ++ tmp8 = bcma_pcie2_read_config8(bdev, 0, devfn, PCI_HEADER_TYPE); ++ if (tmp8 != PCI_HEADER_TYPE_BRIDGE) { ++ dev_info(&bdev->dev, "Port %d in End-Point mode - ignored\n", ++ bdev->core_unit); ++ return -ENODEV; ++ } ++ ++ /* NS PAX only changes NLW field when card is present */ ++ pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP); ++ if (pos) { ++ u8 nlw; ++ ++ pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_LNKSTA, ++ &tmp16); ++ nlw = (tmp16 & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT; ++ link = (tmp16 & PCI_EXP_LNKSTA_DLLLA) || nlw != 0; ++ } ++ ++ return link ? 0 : -ENODEV; ++} ++ ++/* ++ * Initializte the PCIe controller ++ */ ++static void bcma_pcie2_hw_init(struct bcma_device *bdev) ++{ ++ u32 devfn = 0; ++ u32 tmp32; ++ u16 tmp16; ++ ++ /* Change MPS and MRRS to 512 */ ++ tmp16 = bcma_pcie2_read_config16(bdev, 0, devfn, 0x4d4); ++ tmp16 &= ~7; ++ tmp16 |= 2; ++ bcma_pcie2_write_config16(bdev, 0, devfn, 0x4d4, tmp16); ++ ++ tmp32 = bcma_pcie2_read_config32(bdev, 0, devfn, 0xb4); ++ tmp32 &= ~((7 << 12) | (7 << 5)); ++ tmp32 |= (2 << 12) | (2 << 5); ++ bcma_pcie2_write_config32(bdev, 0, devfn, 0xb4, tmp32); ++ ++ /* Turn-on Root-Complex (RC) mode, from reset defailt of EP */ ++ ++ /* The mode is set by straps, can be overwritten via DMU ++ register bit 5, "1" means RC ++ */ ++ ++ /* Send a downstream reset */ ++ bcma_write32(bdev, SOC_PCIE_CONTROL, 0x3); ++ udelay(250); ++ bcma_write32(bdev, SOC_PCIE_CONTROL, 0x1); ++ mdelay(250); ++ ++ /* TBD: take care of PM, check we're on */ ++} ++ ++/* ++ * Setup the address translation ++ */ ++static void bcma_pcie2_map_init(struct bcma_device *bdev) ++{ ++ unsigned size, i; ++ u32 addr; ++ ++ /* ++ * NOTE: ++ * All PCI-to-CPU address mapping are 1:1 for simplicity ++ */ ++ ++ /* Outbound address translation setup */ ++ size = SZ_128M; ++ addr = bdev->addr_s[0]; ++ BUG_ON(!addr); ++ BUG_ON(addr & ((1 << 25) - 1)); /* 64MB alignment */ ++ ++ for (i = 0; i < 3; i++) { ++ const unsigned win_size = SZ_64M; ++ /* 64-bit LE regs, write low word, high is 0 at reset */ ++ bcma_write32(bdev, SOC_PCIE_SYS_OMAP(i), addr); ++ bcma_write32(bdev, SOC_PCIE_SYS_OARR(i), addr|0x1); ++ addr += win_size; ++ if (size >= win_size) ++ size -= win_size; ++ if (size == 0) ++ break; ++ } ++ WARN_ON(size > 0); ++ ++ /* ++ * Inbound address translation setup ++ * Northstar only maps up to 128 MiB inbound, DRAM could be up to 1 GiB. ++ * ++ * For now allow access to entire DRAM, assuming it is less than 128MiB, ++ * otherwise DMA bouncing mechanism may be required. ++ * Also consider DMA mask to limit DMA physical address ++ */ ++ size = SZ_128M; ++ addr = PHYS_OFFSET; ++ ++ size >>= 20; /* In MB */ ++ size &= 0xff; /* Size is an 8-bit field */ ++ ++ WARN_ON(size == 0); ++ /* 64-bit LE regs, write low word, high is 0 at reset */ ++ bcma_write32(bdev, SOC_PCIE_SYS_IMAP1(0), addr | 0x1); ++ bcma_write32(bdev, SOC_PCIE_SYS_IARR(1), addr | size); ++ ++#ifdef CONFIG_SPARSEMEM ++ addr = PHYS_OFFSET2; ++ bcma_write32(bdev, SOC_PCIE_SYS_IMAP2(0), addr | 0x1); ++ bcma_write32(bdev, SOC_PCIE_SYS_IARR(2), addr | size); ++#endif ++} ++ ++/* ++ * Setup PCIE Host bridge ++ */ ++static void bcma_pcie2_bridge_init(struct bcma_device *bdev) ++{ ++ u32 devfn = 0; ++ u8 tmp8; ++ u16 tmp16; ++ ++ bcma_pcie2_write_config8(bdev, 0, devfn, PCI_PRIMARY_BUS, 0); ++ bcma_pcie2_write_config8(bdev, 0, devfn, PCI_SECONDARY_BUS, 1); ++ bcma_pcie2_write_config8(bdev, 0, devfn, PCI_SUBORDINATE_BUS, 4); ++ ++ tmp8 = bcma_pcie2_read_config8(bdev, 0, devfn, PCI_PRIMARY_BUS); ++ tmp8 = bcma_pcie2_read_config8(bdev, 0, devfn, PCI_SECONDARY_BUS); ++ tmp8 = bcma_pcie2_read_config8(bdev, 0, devfn, PCI_SUBORDINATE_BUS); ++ ++ /* MEM_BASE, MEM_LIM require 1MB alignment */ ++ BUG_ON((bdev->addr_s[0] >> 16) & 0xf); ++ bcma_pcie2_write_config16(bdev, 0, devfn, PCI_MEMORY_BASE, ++ bdev->addr_s[0] >> 16); ++ BUG_ON(((bdev->addr_s[0] + SZ_128M) >> 16) & 0xf); ++ bcma_pcie2_write_config16(bdev, 0, devfn, PCI_MEMORY_LIMIT, ++ (bdev->addr_s[0] + SZ_128M) >> 16); ++ ++ /* These registers are not supported on the NS */ ++ bcma_pcie2_write_config16(bdev, 0, devfn, PCI_IO_BASE_UPPER16, 0); ++ bcma_pcie2_write_config16(bdev, 0, devfn, PCI_IO_LIMIT_UPPER16, 0); ++ ++ /* Force class to that of a Bridge */ ++ bcma_pcie2_write_config16(bdev, 0, devfn, PCI_CLASS_DEVICE, ++ PCI_CLASS_BRIDGE_PCI); ++ ++ tmp16 = bcma_pcie2_read_config16(bdev, 0, devfn, PCI_CLASS_DEVICE); ++ tmp16 = bcma_pcie2_read_config16(bdev, 0, devfn, PCI_MEMORY_BASE); ++ tmp16 = bcma_pcie2_read_config16(bdev, 0, devfn, PCI_MEMORY_LIMIT); ++} ++ ++static int bcma_pcie2_allow_gen2_rc(struct bcma_device *bdev) ++{ ++ u32 vendorid, devid, chipid, chiprev; ++ u32 val, bar; ++ void __iomem *base; ++ int allow = 1; ++ ++ /* Read PCI vendor/device ID's */ ++ bcma_write32(bdev, SOC_PCIE_CFG_ADDR, 0x0); ++ val = bcma_read32(bdev, SOC_PCIE_CFG_DATA); ++ vendorid = val & 0xffff; ++ devid = val >> 16; ++ if (vendorid == PCI_VENDOR_ID_BROADCOM && ++ (devid == BCMA_CHIP_ID_BCM4360 || devid == BCM4360_D11AC_ID || ++ devid == BCM4360_D11AC2G_ID || devid == BCM4360_D11AC5G_ID || ++ devid == BCM4352_D11AC_ID || devid == BCM4352_D11AC2G_ID || ++ devid == BCM4352_D11AC5G_ID)) { ++ /* Config BAR0 */ ++ bar = bdev->addr_s[0]; ++ bcma_write32(bdev, SOC_PCIE_CFG_ADDR, 0x10); ++ bcma_write32(bdev, SOC_PCIE_CFG_DATA, bar); ++ /* Config BAR0 window to access chipc */ ++ bcma_write32(bdev, SOC_PCIE_CFG_ADDR, 0x80); ++ bcma_write32(bdev, SOC_PCIE_CFG_DATA, SI_ENUM_BASE); ++ ++ /* Enable memory resource */ ++ bcma_write32(bdev, SOC_PCIE_CFG_ADDR, 0x4); ++ val = bcma_read32(bdev, SOC_PCIE_CFG_DATA); ++ val |= PCI_COMMAND_MEMORY; ++ bcma_write32(bdev, SOC_PCIE_CFG_DATA, val); ++ /* Enable memory and bus master */ ++ bcma_write32(bdev, SOC_PCIE_HDR_OFF + 4, 0x6); ++ ++ /* Read CHIP ID */ ++ base = ioremap(bar, 0x1000); ++ val = __raw_readl(base); ++ iounmap(base); ++ chipid = val & 0xffff; ++ chiprev = (val >> 16) & 0xf; ++ if ((chipid == BCMA_CHIP_ID_BCM4360 || ++ chipid == BCMA_CHIP_ID_BCM43460 || ++ chipid == BCMA_CHIP_ID_BCM4352) && (chiprev < 3)) ++ allow = 0; ++ } ++ return allow; ++} ++ ++static void bcma_pcie2_3rd_init(struct bcma_bus *bus) ++{ ++ /* PCIE PLL block register (base 0x8000) */ ++ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x00000088, 0x57fe8000); ++ /* Check PCIE PLL lock status */ ++ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x00000088, 0x67c60000); ++} ++ ++/* To improve PCIE phy jitter */ ++static void bcma_pcie2_improve_phy_jitter(struct bcma_bus *bus, int phyaddr) ++{ ++ u32 val; ++ ++ /* Change blkaddr */ ++ val = (1 << 30) | (1 << 28) | (phyaddr << 23) | (0x1f << 18) | ++ (2 << 16) | (0x863 << 4); ++ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x0000009a, val); ++ ++ /* Write 0x0190 to 0x13 regaddr */ ++ val = (1 << 30) | (1 << 28) | (phyaddr << 23) | (0x13 << 18) | ++ (2 << 16) | 0x0190; ++ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x0000009a, val); ++ ++ /* Write 0x0191 to 0x19 regaddr */ ++ val = (1 << 30) | (1 << 28) | (phyaddr << 23) | (0x19 << 18) | ++ (2 << 16) | 0x0191; ++ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x0000009a, val); ++} ++ ++static int bcma_pcie2_setup(int nr, struct pci_sys_data *sys) ++{ ++ struct bcma_device *bdev = sys->private_data; ++ struct bcma_bus *bus = bdev->bus; ++ struct resource *res; ++ struct bcma_device *arm_core; ++ u32 cru_straps_ctrl; ++ int allow_gen2, linkfail; ++ int phyaddr; ++ ++ if (bdev->core_unit == 2) { ++ arm_core = bcma_find_core(bus, BCMA_CORE_ARMCA9); ++ cru_straps_ctrl = bcma_read32(arm_core, 0x2a0); ++ ++ /* 3rd PCIE is not selected */ ++ if (cru_straps_ctrl & 0x10) ++ return -ENODEV; ++ ++ bcma_pcie2_3rd_init(bus); ++ phyaddr = 0xf; ++ } else { ++ phyaddr = bdev->core_unit; ++ } ++ bcma_pcie2_improve_phy_jitter(bus, phyaddr); ++ ++ /* create mem resource */ ++ res = devm_kzalloc(&bdev->dev, sizeof(*res), GFP_KERNEL); ++ if (!res) ++ return -EINVAL; ++ ++ res->start = bdev->addr_s[0]; ++ res->end = res->start + SZ_128M - 1; ++ res->name = "PCIe Configuration Space"; ++ res->flags = IORESOURCE_MEM; ++ ++ pci_add_resource(&sys->resources, res); ++ ++ /* This PCIe controller does not support IO Mem, so use a dummy one. */ ++ res = devm_kzalloc(&bdev->dev, sizeof(*res), GFP_KERNEL); ++ if (!res) ++ return -EINVAL; ++ ++ res->start = bdev->addr_s[0]; ++ res->end = res->start + SZ_128M - 1; ++ res->name = "PCIe Configuration Space"; ++ res->flags = IORESOURCE_IO; ++ ++ pci_add_resource(&sys->resources, res); ++ ++ for (allow_gen2 = 0; allow_gen2 <= 1; allow_gen2++) { ++ bcma_pcie2_hw_init(bdev); ++ bcma_pcie2_map_init(bdev); ++ ++ /* ++ * Skip inactive ports - ++ * will need to change this for hot-plugging ++ */ ++ linkfail = bcma_pcie2_check_link(bdev, sys, allow_gen2); ++ if (linkfail) ++ break; ++ ++ bcma_pcie2_bridge_init(bdev); ++ ++ if (allow_gen2 == 0) { ++ if (bcma_pcie2_allow_gen2_rc(bdev) == 0) ++ break; ++ dev_info(&bdev->dev, "switching to GEN2\n"); ++ } ++ } ++ ++ if (linkfail) ++ return -1; ++ ++ return 1; ++} ++ ++/* ++ * Methods for accessing configuration registers ++ */ ++static struct pci_ops bcma_pcie2_ops = { ++ .read = bcma_pcie2_read_config_pci, ++ .write = bcma_pcie2_write_config_pci, ++}; ++ ++static int bcma_pcie2_probe(struct bcma_device *bdev) ++{ ++ struct hw_pci hw; ++ ++ dev_info(&bdev->dev, "scanning bus\n"); ++ ++ hw = (struct hw_pci) { ++ .nr_controllers = 1, ++ .domain = bdev->core_unit, ++ .private_data = (void **)&bdev, ++ .setup = bcma_pcie2_setup, ++ .map_irq = bcma_pcie2_map_irq, ++ .ops = &bcma_pcie2_ops, ++ }; ++ ++ /* Announce this port to ARM/PCI common code */ ++ pci_common_init_dev(&bdev->dev, &hw); ++ ++ /* Setup virtual-wire interrupts */ ++ bcma_write32(bdev, SOC_PCIE_SYS_RC_INTX_EN, 0xf); ++ ++ /* Enable memory and bus master */ ++ bcma_write32(bdev, SOC_PCIE_HDR_OFF + 4, 0x6); ++ ++ return 0; ++} ++ ++static const struct bcma_device_id bcma_pcie2_table[] = { ++ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_PCIEG2, BCMA_ANY_REV, BCMA_ANY_CLASS), ++ BCMA_CORETABLE_END ++}; ++MODULE_DEVICE_TABLE(bcma, bcma_pcie2_table); ++ ++static struct bcma_driver bcma_pcie2_driver = { ++ .name = KBUILD_MODNAME, ++ .id_table = bcma_pcie2_table, ++ .probe = bcma_pcie2_probe, ++}; ++ ++static int __init bcma_pcie2_init(void) ++{ ++ return bcma_driver_register(&bcma_pcie2_driver); ++} ++module_init(bcma_pcie2_init); ++ ++static void __exit bcma_pcie2_exit(void) ++{ ++ bcma_driver_unregister(&bcma_pcie2_driver); ++} ++module_exit(bcma_pcie2_exit); ++ ++MODULE_AUTHOR("Hauke Mehrtens"); ++MODULE_DESCRIPTION("PCIe Gen2 driver for BCMA"); ++MODULE_LICENSE("GPLv2"); -- cgit v1.2.3