From 8299d1f057439f94c6a4412e2e5c5082b82a30c9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Sat, 21 Aug 2021 10:54:34 +0200 Subject: bcm27xx: add kernel 5.10 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted patches, wireless patches and defconfig patches. bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 4B v1.1 4G bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas --- ...RM-dts-update-bcm2711-rpi-cm4.dts-and-400.patch | 205 +++++++++++++++++++++ 1 file changed, 205 insertions(+) create mode 100644 target/linux/bcm27xx/patches-5.10/950-0521-ARM-dts-update-bcm2711-rpi-cm4.dts-and-400.patch (limited to 'target/linux/bcm27xx/patches-5.10/950-0521-ARM-dts-update-bcm2711-rpi-cm4.dts-and-400.patch') diff --git a/target/linux/bcm27xx/patches-5.10/950-0521-ARM-dts-update-bcm2711-rpi-cm4.dts-and-400.patch b/target/linux/bcm27xx/patches-5.10/950-0521-ARM-dts-update-bcm2711-rpi-cm4.dts-and-400.patch new file mode 100644 index 0000000000..f60418856a --- /dev/null +++ b/target/linux/bcm27xx/patches-5.10/950-0521-ARM-dts-update-bcm2711-rpi-cm4.dts-and-400.patch @@ -0,0 +1,205 @@ +From a38d7464ca20e1c0aaa3ed77e03e1ea6af4bc557 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 31 Mar 2021 10:22:30 +0100 +Subject: [PATCH] ARM: dts: update bcm2711-rpi-cm4.dts and -400 + +Neither CM4 nor Pi 400 have appeared upstream yet, and as a result +they have missed out on improvements to the Pi 4B platform. + +Signed-off-by: Phil Elwell + +ARM: dts: Bring bcm2711-rpi-400.dts up-to-date + +Pi 400 support has not appeared upstream yet, and as a result it has +missed out on improvements to the other Pi 4 platforms. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2711-rpi-400.dts | 17 +++++++ + arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 73 +++++++++++++++++++++------ + 2 files changed, 74 insertions(+), 16 deletions(-) + +--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts ++++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts +@@ -24,6 +24,7 @@ + emmc2bus = &emmc2bus; + ethernet0 = &genet; + pcie0 = &pcie0; ++ blconfig = &blconfig; + }; + + leds { +@@ -215,6 +216,22 @@ + status = "okay"; + }; + ++&rmem { ++ /* ++ * RPi4's co-processor will copy the board's bootloader configuration ++ * into memory for the OS to consume. It'll also update this node with ++ * its placement information. ++ */ ++ blconfig: nvram@0 { ++ compatible = "raspberrypi,bootloader-config", "nvmem-rmem"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ reg = <0x0 0x0 0x0>; ++ no-map; ++ status = "disabled"; ++ }; ++}; ++ + /* SDHCI is used to control the SDIO for wireless */ + &sdhci { + #address-cells = <1>; +--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts ++++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts +@@ -3,6 +3,8 @@ + #include "bcm2711.dtsi" + #include "bcm2835-rpi.dtsi" + ++#include ++ + / { + compatible = "raspberrypi,4-compute-module", "brcm,bcm2711"; + model = "Raspberry Pi Compute Module 4"; +@@ -22,6 +24,7 @@ + emmc2bus = &emmc2bus; + ethernet0 = &genet; + pcie0 = &pcie0; ++ blconfig = &blconfig; + }; + + leds { +@@ -76,6 +79,11 @@ + }; + + &firmware { ++ firmware_clocks: clocks { ++ compatible = "raspberrypi,firmware-clocks"; ++ #clock-cells = <1>; ++ }; ++ + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; +@@ -102,6 +110,11 @@ + output-low; + }; + }; ++ ++ reset: reset { ++ compatible = "raspberrypi,firmware-reset"; ++ #reset-cells = <1>; ++ }; + }; + + &gpio { +@@ -209,20 +222,28 @@ + status = "okay"; + }; + +-&vc4 { +- status = "okay"; +-}; +- +-&vec { +- status = "disabled"; +-}; +- + &pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; + status = "okay"; + }; + ++&rmem { ++ /* ++ * RPi4's co-processor will copy the board's bootloader configuration ++ * into memory for the OS to consume. It'll also update this node with ++ * its placement information. ++ */ ++ blconfig: nvram@0 { ++ compatible = "raspberrypi,bootloader-config", "nvmem-rmem"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ reg = <0x0 0x0 0x0>; ++ no-map; ++ status = "disabled"; ++ }; ++}; ++ + /* SDHCI is used to control the SDIO for wireless */ + &sdhci { + #address-cells = <1>; +@@ -262,6 +283,21 @@ + }; + }; + ++&pcie0 { ++ pci@1,0 { ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ranges; ++ ++ reg = <0 0 0 0 0>; ++ ++ usb@1,0 { ++ reg = <0x10000 0 0 0 0>; ++ resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>; ++ }; ++ }; ++}; ++ + /* uart0 communicates with the BT module */ + &uart0 { + pinctrl-names = "default"; +@@ -287,6 +323,14 @@ + interrupts = ; + }; + ++&vc4 { ++ status = "okay"; ++}; ++ ++&vec { ++ status = "disabled"; ++}; ++ + // ============================================= + // Downstream rpi- changes + +@@ -306,6 +350,7 @@ + #include "bcm283x-rpi-csi0-2lane.dtsi" + #include "bcm283x-rpi-csi1-4lane.dtsi" + #include "bcm283x-rpi-i2c0mux_0_44.dtsi" ++#include "bcm283x-rpi-cam1-regulator.dtsi" + + / { + chosen { +@@ -331,14 +376,6 @@ + }; + + /delete-node/ wifi-pwrseq; +- +- cam0_reg: cam1_reg: cam1_reg { +- compatible = "regulator-fixed"; +- regulator-name = "cam1-reg"; +- gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; +- enable-active-high; +- status = "disabled"; +- }; + }; + + &mmcnr { +@@ -589,6 +626,10 @@ + brcm,disable-headphones = <1>; + }; + ++cam0_reg: &cam1_reg { ++ gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; ++}; ++ + / { + __overrides__ { + act_led_gpio = <&act_led>,"gpios:4"; -- cgit v1.2.3