From d4b3b23942336e22ef36ccbcf584efa6a55cc408 Mon Sep 17 00:00:00 2001 From: Sander Vanheule Date: Sun, 5 Jun 2022 12:58:24 +0200 Subject: ath79: TP-Link EAP245 v3: convert radios to nvmem-cells Replace the mtd-cal-data phandle by an nvmem-cell reference from the art partition for the 2.4GHz ath9k radio. Add the PCIe node for the ath10k radio to the devicetree, and refer to the art partition for the calibration data using an nvmem-cell. Use mac-address-increment to ensure the MAC address is set correctly, and remove the device from the caldata extraction and patching script. Signed-off-by: Sander Vanheule --- .../linux/ath79/dts/qca9563_tplink_eap245-v3.dts | 29 +++++++++++++++++++--- .../etc/hotplug.d/firmware/11-ath10k-caldata | 4 --- 2 files changed, 25 insertions(+), 8 deletions(-) (limited to 'target/linux/ath79') diff --git a/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts b/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts index 768a48bd69..6819d2d822 100644 --- a/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts +++ b/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts @@ -46,6 +46,16 @@ &pcie { status = "okay"; + + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0 0 0 0 0>; + + mac-address-increment = <1>; + + nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>; + nvmem-cell-names = "mac-address", "calibration"; + }; }; &spi { @@ -85,10 +95,22 @@ read-only; }; - art: partition@a0000 { + partition@a0000 { label = "art"; reg = <0x0a0000 0x010000>; read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + calibration_ath9k: calibration@1000 { + reg = <0x1000 0x440>; + }; + + calibration_ath10k: calibration@5000 { + reg = <0x5000 0x2f20>; + }; }; partition@b0000 { @@ -151,9 +173,8 @@ &wmac { status = "okay"; - mtd-cal-data = <&art 0x1000>; - nvmem-cells = <&macaddr_info_8>; - nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_info_8>, <&calibration_ath9k>; + nvmem-cell-names = "mac-address", "calibration"; }; &info { diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 1c80966efe..ee53f31638 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -256,10 +256,6 @@ case "$FIRMWARE" in ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; - tplink,eap245-v3) - caldata_extract "art" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1) - ;; xiaomi,aiot-ac2350) caldata_extract "art" 0x5000 0x2f20 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ -- cgit v1.2.3