From 44e1e5d153d00915a7e516c9af3f440cbd84cf78 Mon Sep 17 00:00:00 2001 From: Joe Mullally Date: Mon, 30 Aug 2021 22:35:05 +0100 Subject: ath79: Move TPLink WPA8630Pv2 to ath79-tiny target MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These devices only have 6MiB available for firmware, which is not enough for recent release images, so move these to the tiny target. Note for users sysupgrading from the previous ath79-generic snapshot images: The tiny target kernel has a 4Kb flash erase block size instead of the generic target's 64kb. This means the JFFS2 overlay partition containing settings must be reformatted with the new block size or else there will be data corruption. To do this, backup your settings before upgrading, then during the sysupgrade, de-select "Keep Settings". On the CLI, use "sysupgrade -n". If you forget to do this and your system becomes unstable after upgrading, you can do this to format the partition and recover: * Reboot * Press RESET when Power LED blinks during boot to enter Failsafe mode * SSH to 192.168.1.1 * Run "firstboot" and reboot Signed-off-by: Joe Mullally Tested-by: Robert Högberg --- .../ath79/tiny/base-files/etc/board.d/01_leds | 5 +++++ .../ath79/tiny/base-files/etc/board.d/02_network | 7 ++++++ .../tiny/base-files/etc/board.d/05_compat-version | 20 +++++++++++++++++ .../etc/hotplug.d/firmware/11-ath10k-caldata | 25 ++++++++++++++++++++++ 4 files changed, 57 insertions(+) create mode 100644 target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version create mode 100644 target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata (limited to 'target/linux/ath79/tiny') diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds index 72df8b3dea..f705c5c718 100644 --- a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds @@ -93,6 +93,11 @@ tplink,tl-wa850re-v2) ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "blue:signal4" "wlan0" "60" "100" ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "blue:signal5" "wlan0" "80" "100" ;; +tplink,tl-wpa8630p-v2-int|\ +tplink,tl-wpa8630p-v2.0-eu|\ +tplink,tl-wpa8630p-v2.1-eu) + ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c" + ;; tplink,tl-wr940n-v3|\ tplink,tl-wr940n-v4|\ tplink,tl-wr941nd-v6) diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/02_network b/target/linux/ath79/tiny/base-files/etc/board.d/02_network index 45335c7c89..77b2444819 100644 --- a/target/linux/ath79/tiny/base-files/etc/board.d/02_network +++ b/target/linux/ath79/tiny/base-files/etc/board.d/02_network @@ -82,6 +82,13 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" ;; + tplink,tl-wpa8630p-v2-int|\ + tplink,tl-wpa8630p-v2.0-eu|\ + tplink,tl-wpa8630p-v2.1-eu) + # port 5 (internal) is the power-line port + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4" + ;; tplink,tl-wr941-v2) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" ;; diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version b/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version new file mode 100644 index 0000000000..b6c2ae48f7 --- /dev/null +++ b/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version @@ -0,0 +1,20 @@ +# +# Copyright (C) 2020 OpenWrt.org +# + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh + +board_config_update + +case "$(board_name)" in + tplink,tl-wpa8630p-v2-int|\ + tplink,tl-wpa8630p-v2.0-eu|\ + tplink,tl-wpa8630p-v2.1-eu) + ucidef_set_compat_version "2.0" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata new file mode 100644 index 0000000000..8e3e142ec9 --- /dev/null +++ b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -0,0 +1,25 @@ +#!/bin/sh + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/functions/caldata.sh + +board=$(board_name) + +case "$FIRMWARE" in +"ath10k/pre-cal-pci-0000:00:00.0.bin") + case $board in + tplink,tl-wpa8630p-v2-int|\ + tplink,tl-wpa8630p-v2.0-eu|\ + tplink,tl-wpa8630p-v2.1-eu) + caldata_extract "art" 0x5000 0x2f20 + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1) + ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ + /lib/firmware/ath10k/QCA9888/hw2.0/board.bin + ;; + esac + ;; +*) + exit 1 + ;; +esac -- cgit v1.2.3