From af8a059bb41dd7afee49ce9a5d52e9a8e010bbd8 Mon Sep 17 00:00:00 2001 From: Victorien Molle Date: Fri, 20 Aug 2021 21:41:19 +0200 Subject: ath79: add support for GL.iNet GL-XE300 The GL.iNet GL-XE300 is a 4G LTE Wireless router, based on QCA9531 SoC. Specifications: - SoC: QCA9531 (650MHz) - RAM: DDR2 128M - Flash: SPI NOR 16M + SPI NAND 128M - WiFi: 2.4GHz with 2 antennas - Ethernet: - 1x LAN (10/100M) - 1x WAN (10/100M) - LTE: - USB: 1x USB 2.0 port - UART: - 3.3V, TX, RX, GND / 115200 8N1 MAC addresses as verified by OEM firmware: use address source LAN *:c5 art 0x0 (label) WAN *:c6 label + 1 WLAN *:c7 art 0x1002 Installation via U-Boot rescue: 1. Press and hold reset and power buttons simultaneously 2. Wait for the LAN led to blink 5 times 3. Release reset and power buttons 4. The rescue page is accessible via http://192.168.1.1 5. Select the OpenWrt factory image and start upgrade 6. Wait for the router to flash new firmware and reboot Revert to stock firmware: i. Download the stock firmware from GL.Inet website ii. Use the same method explained above to flash the stock firmware Signed-off-by: Victorien Molle [update commit message] Signed-off-by: David Bauer --- target/linux/ath79/image/nand.mk | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'target/linux/ath79/image') diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk index d31aba1abc..b8006c6d0c 100644 --- a/target/linux/ath79/image/nand.mk +++ b/target/linux/ath79/image/nand.mk @@ -195,6 +195,22 @@ define Device/glinet_gl-e750 endef TARGET_DEVICES += glinet_gl-e750 +define Device/glinet_gl-xe300 + SOC := qca9531 + DEVICE_VENDOR := GL.iNet + DEVICE_MODEL := GL-XE300 + DEVICE_PACKAGES := kmod-usb2 block-mount kmod-usb-serial-ch341 + KERNEL_SIZE := 4096k + IMAGE_SIZE := 131072k + PAGESIZE := 2048 + VID_HDR_OFFSET := 2048 + BLOCKSIZE := 128k + IMAGES += factory.img + IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += glinet_gl-xe300 + # fake rootfs is mandatory, pad-offset 129 equals (2 * uimage_header + 0xff) define Device/netgear_ath79_nand DEVICE_VENDOR := NETGEAR -- cgit v1.2.3