From c566439c9bf3cf2b4e5e5a059332c64199d97611 Mon Sep 17 00:00:00 2001
From: INAGAKI Hiroshi <musashino.open@gmail.com>
Date: Sat, 8 Dec 2018 15:18:17 +0900
Subject: ath79: add support for NEC Aterm WG800HP
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

NEC Aterm WG800HP is a 2.4/5 GHz band 11ac router, based on Qualcomm
Atheros QCA9563.

Specification:

- Qualcomm Atheros QCA9563
- 64 MB of RAM (DDR2)
- 8 MB of Flash (SPI-NOR)
- 2.4/5 GHz wifi
  - 2.4 GHz: 2T2R (SoC internal)
  - 5 GHz: 1T1R (QCA9887)
- 4x 10/100/1000 Mbps Ethernet
- 8x LEDs, 3x keys (2x buttons, 1x slide-switch)
- UART through-hole on PCB (J2)
  - Vcc, GND, NC, TX, RX from SoC side
  - 115200n8

Flash instruction using factory image:

1. Connect the computer to the LAN port on WG800HP
2. Connect power cable to WG800HP and turn on it
3. Access to "http://192.168.10.1/" and open firmware update page
("ファームウェア更新")
4. Select the OpenWrt factory image and click update ("更新") button
5. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
---
 target/linux/ath79/image/generic.mk | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'target/linux/ath79/image/generic.mk')

diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index c6cecc20d3..badfa7cbab 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -43,6 +43,16 @@ define Build/elecom-header
 
 endef
 
+define Build/nec-fw
+  ( stat -c%s $@ | tr -d "\n" | dd bs=16 count=1 conv=sync; ) >> $@
+  ( \
+    echo -n -e "$(1)" | dd bs=16 count=1 conv=sync; \
+    echo -n "0.0.00" | dd bs=16 count=1 conv=sync; \
+    dd if=$@; \
+  ) > $@.new
+  mv $@.new $@
+endef
+
 define Device/avm_fritz300e
   ATH_SOC := ar7242
   DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
@@ -262,6 +272,19 @@ define Device/iodata_wn-ag300dgr
 endef
 TARGET_DEVICES += iodata_wn-ag300dgr
 
+define Device/nec_wg800hp
+  ATH_SOC := qca9563
+  DEVICE_TITLE := NEC Aterm WG800HP
+  IMAGE_SIZE := 7104k
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+    append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
+    xor-image -p 6A57190601121E4C004C1E1201061957 -x | \
+    nec-fw LASER_ATERM
+  DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct-htt
+endef
+TARGET_DEVICES += nec_wg800hp
+
 define Device/ocedo_koala
   ATH_SOC := qca9558
   DEVICE_TITLE := OCEDO Koala
-- 
cgit v1.2.3