From b077accb9c79f215d4da5f44474e72aec07e16dc Mon Sep 17 00:00:00 2001 From: Sebastian Schaper Date: Wed, 17 Jun 2020 00:11:37 +0200 Subject: ath79: add support for D-Link DAP-2230 A1 Specifications: * QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R * 10/100 Ethernet Port, 802.11af PoE Installation: * Factory Web UI is at 192.168.0.50 login with 'admin' and blank password, flash factory.bin * Recovery Web UI is at 192.168.0.50 connect network cable, hold reset button during power-on and keep it pressed until uploading has started (only required when checksum is ok, e.g. for reverting back to oem firmware), flash factory.bin After flashing factory.bin, additional free space can be reclaimed by flashing sysupgrade.bin, since the factory image requires some padding to be accepted for upgrading via OEM Web UI. Signed-off-by: Sebastian Schaper --- target/linux/ath79/image/generic.mk | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'target/linux/ath79/image/generic.mk') diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index ded8e29c2c..080c6a1603 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -749,6 +749,17 @@ define Device/dlink_dap-2xxx KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg endef +define Device/dlink_dap-2230-a1 + $(Device/dlink_dap-2xxx) + SOC := qca9533 + DEVICE_VENDOR := D-Link + DEVICE_MODEL := DAP-2230 + DEVICE_VARIANT := A1 + IMAGE_SIZE := 15232k + DAP_SIGNATURE := wapn31_dkbs_dap2230 +endef +TARGET_DEVICES += dlink_dap-2230-a1 + define Device/dlink_dap-2660-a1 $(Device/dlink_dap-2xxx) SOC := qca9557 -- cgit v1.2.3