From 321ec22f5246aeb20f57e88ecc149a272f469bd3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= Date: Thu, 14 Apr 2022 12:39:05 +0200 Subject: ath79: add support for Yuncore A930 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Specification: - QCA9533 (650 MHz), 64 or 128MB RAM, 16MB SPI NOR - 2x 10/100 Mbps Ethernet, with 802.3at PoE support (WAN) - 2T2R 802.11b/g/n 2.4GHz Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Clemens Hopfer Signed-off-by: Thibaut VARÈNE (cherry picked from commit a05dcb07241aa83a4416b56201e31b4af8518981) --- target/linux/ath79/image/generic.mk | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'target/linux/ath79/image/generic.mk') diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 33a72358b3..dc85fb60bf 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -2528,6 +2528,16 @@ define Device/yuncore_a782 endef TARGET_DEVICES += yuncore_a782 +define Device/yuncore_a930 + SOC := qca9533 + DEVICE_VENDOR := YunCore + DEVICE_MODEL := A930 + IMAGE_SIZE := 16000k + IMAGES += tftp.bin + IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m +endef +TARGET_DEVICES += yuncore_a930 + define Device/yuncore_xd3200 SOC := qca9563 DEVICE_VENDOR := YunCore -- cgit v1.2.3