From 24d455d1d0adf64de844b25800c23992aa3eeda5 Mon Sep 17 00:00:00 2001 From: Catrinel Catrinescu Date: Thu, 2 Dec 2021 10:07:54 +0000 Subject: ath79: add Embedded Wireless Balin Platform Add the Embedded Wireless "Balin" platform, it is in ar71xx too SoC: QCA AR9344 or AR9350 RAM: DDR2-RAM 64MBytes Flash: SPI-NOR 16MBytes WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n Ethernet: 3 x 10/100 Mb/s USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up PCIe: MiniPCIe - 1 x lane PCIe 1.2 Button: 1 x Reset-Button UART: 1 x Normal, 1 x High-Speed JTAG: 1 x EJTAG LED: 1 x Green Power/Status LED GPIO: 10 x Input/Output multiplexed The module comes already with the current vanilla OpenWrt firmware. To update, use "sysupgrade -n --force " image directly in vendor firmware. This resets the existing configurations back to default! Signed-off-by: Catrinel Catrinescu [indent, led function+color properties, fix partition unit-address, re-enable pcie port, mention button+led in commit message] Signed-off-by: Christian Lamparter --- target/linux/ath79/image/generic.mk | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'target/linux/ath79/image/generic.mk') diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 39f616b010..c259db94af 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1028,6 +1028,15 @@ define Device/elecom_wrc-300ghbk2-i endef TARGET_DEVICES += elecom_wrc-300ghbk2-i +define Device/embeddedwireless_balin + SOC := ar9344 + DEVICE_VENDOR := Embedded Wireless + DEVICE_MODEL := Balin + DEVICE_PACKAGES := kmod-usb-chipidea2 + IMAGE_SIZE := 16000k +endef +TARGET_DEVICES += embeddedwireless_balin + define Device/embeddedwireless_dorin SOC := ar9331 DEVICE_VENDOR := Embedded Wireless -- cgit v1.2.3