From 550e5b218453172de16309e3e1d1a8c451c8b3c3 Mon Sep 17 00:00:00 2001 From: Andrew Cameron Date: Sun, 6 Nov 2022 14:43:37 +0000 Subject: ath79: add support for TP-Link CPE605-v1 TP-Link CPE605-v1 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - 560/450/225 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 64 MB of DDR2 RAM - 8 MB of SPI-NOR Flash - 23dBi high-gain directional antenna and a dedicated metal reflector - Power, LAN, WLAN5G green LEDs - 3x green RSSI LEDs Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron --- target/linux/ath79/generic/base-files/etc/board.d/01_leds | 1 + target/linux/ath79/generic/base-files/etc/board.d/02_network | 1 + 2 files changed, 2 insertions(+) (limited to 'target/linux/ath79/generic') diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index cfcd2dfeda..f0610f39e9 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -18,6 +18,7 @@ glinet,6416|\ glinet,gl-ar300m-lite|\ glinet,gl-ar300m16|\ pcs,cap324|\ +tplink,cpe605-v1|\ tplink,cpe610-v1|\ tplink,cpe610-v2|\ tplink,tl-wa1201-v2) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index e14240ba0b..529d33782f 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -77,6 +77,7 @@ ath79_setup_interfaces() tplink,cpe210-v3|\ tplink,cpe510-v2|\ tplink,cpe510-v3|\ + tplink,cpe605-v1|\ tplink,cpe610-v1|\ tplink,cpe610-v2|\ tplink,cpe710-v1|\ -- cgit v1.2.3