From 06874171d125f0a69d6fb8cfd12213b7913d317e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= Date: Fri, 15 Apr 2022 13:17:49 +0200 Subject: ath79: add support for Yuncore XD3200 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Specification: - QCA9563 (775MHz), 128MB RAM, 16MB SPI NOR - 2T2R 802.11b/g/n 2.4GHz - 2T2R 802.11n/ac 5GHz - 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port) LED for 5 GHz WLAN is currently not supported as it is connected directly to the QCA9882 radio chip. Flash instructions: If your device comes with generic QSDK based firmware, you can login over telnet (login: root, empty password, default IP: 192.168.188.253), issue first (important!) 'fw_setenv' command and then perform regular upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download image to the device, SSH server is not available): fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin In case your device runs firmware with YunCore custom GUI, you can use U-Boot recovery mode: 1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with 'tftp' image renamed to 'upgrade.bin' 2. Power the device with reset button pressed and release it after 5-7 seconds, recovery mode should start downloading image from server (unfortunately, there is no visible indication that recovery got enabled - in case of problems check TFTP server logs) Signed-off-by: Thibaut VARÈNE (cherry-picked from commit c91df224f54fdd44c9c0487a8c91876f5d273164) --- target/linux/ath79/generic/base-files/etc/board.d/01_leds | 3 ++- target/linux/ath79/generic/base-files/etc/board.d/02_network | 1 + .../ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 3 ++- 3 files changed, 5 insertions(+), 2 deletions(-) (limited to 'target/linux/ath79/generic') diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 3031b4703b..b6c68db813 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -220,7 +220,8 @@ glinet,gl-x750) hak5,lan-turtle) ucidef_set_led_netdev "wan" "WAN" "orange:system" "eth1" ;; -joyit,jt-or750i) +joyit,jt-or750i|\ +yuncore,xd3200) ucidef_set_led_default "ath10k" "ath10k-disable" "ath10k-phy0" "0" ;; meraki,mr12|\ diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index d4f53e7dae..5bf78117e1 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -306,6 +306,7 @@ ath79_setup_interfaces() ubnt,nanobeam-ac-gen2|\ ubnt,nanostation-ac|\ yuncore,a782|\ + yuncore,xd3200|\ yuncore,xd4200) ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:wan" diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 69735f3360..c562fa7c74 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -44,7 +44,8 @@ case "$FIRMWARE" in ubnt,powerbeam-5ac-500|\ ubnt,powerbeam-5ac-gen2|\ ubnt,unifiac-pro|\ - yuncore,a770) + yuncore,a770|\ + yuncore,xd3200) caldata_extract "art" 0x5000 0x844 ;; devolo,dvl1200e|\ -- cgit v1.2.3