From 448de2e2e5c2c00a11bdf08147ee85242b2d48d2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E5=BC=A0=E9=B9=8F?= Date: Sat, 31 Oct 2020 09:35:21 +0800 Subject: ath79: add support for Qxwlan E600G v2 / E600GAC v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit E600G v2 based on Qualcomm/Atheros QCA9531 Specification: - 650/600/200 MHz (CPU/DDR/AHB) - 128/64 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz - 2 x 10/100 Mbps Ethernet(RJ45) - 1 x MiniPCI-e - 1 x SIM (3G/4G) - 5 x LED , 1 x Button(SW2-Reset Buttun), 1 x power input - UART(J100) header on PCB(115200 8N1) E600GAC v2 based on Qualcomm/Atheros QCA9531 + QCA9887 Specification: - 650/600/200 MHz (CPU/DDR/AHB) - 128/64 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz - 1T1R 5 GHz - 2 x 10/100 Mbps Ethernet(RJ45) - 6 x LED (one three-color led), 2 x Button(SW2-Reset Buttun),1 x power input - UART (J100)header on PCB(115200 8N1) Flash instruction: 1.Using tftp mode with UART connection and original OpenWrt image - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "openwrt-ath79-generic-xxx-squashfs-sysupgrade.bin" to "firmware.bin" and place it in tftp server directory. - Connect PC with one of LAN ports, power up the router and press key "Enter" to access U-Boot CLI. - Use the following commands to update the device to OpenWrt: run lfw - After that the device will reboot and boot to OpenWrt. - Wait until all LEDs stops flashing and use the router. 2.Using httpd mode with Web UI connection and original OpenWrt image - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server. - Connect PC with one of LAN ports,press the reset button, power up the router and keep button pressed for around 6-7 seconds, until leds flashing. - Open your browser and enter 192.168.1.1,You will see the upgrade interface, select "openwrt-ath79-generic-xxx-squashfs- sysupgrade.bin" and click the upgrade button. - After that the device will reboot and boot to OpenWrt. - Wait until all LEDs stops flashing and use the router. Signed-off-by: 张鹏 [rearrange in generic.mk, fix one case in 04_led_migration, update commit message] Signed-off-by: Adrian Schmutzler --- target/linux/ath79/generic/base-files/etc/board.d/01_leds | 4 ++++ .../generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 2 ++ .../ath79/generic/base-files/etc/uci-defaults/04_led_migration | 8 ++++++++ 3 files changed, 14 insertions(+) (limited to 'target/linux/ath79/generic/base-files') diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 0c130e329e..227e64678d 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -195,6 +195,10 @@ etactica,eg200) ucidef_set_led_oneshot "modbus" "Modbus" "red:modbus" "100" "33" ;; glinet,gl-mifi|\ +qxwlan,e600g-v2-8m|\ +qxwlan,e600g-v2-16m|\ +qxwlan,e600gac-v2-8m|\ +qxwlan,e600gac-v2-16m|\ qxwlan,e750a-v4-8m|\ qxwlan,e750a-v4-16m) ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x02" diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 25e864ba72..e968658cac 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -24,6 +24,8 @@ case "$FIRMWARE" in devolo,magic-2-wifi|\ qxwlan,e1700ac-v2-8m|\ qxwlan,e1700ac-v2-16m|\ + qxwlan,e600gac-v2-8m|\ + qxwlan,e600gac-v2-16m|\ ubnt,unifiac-lite|\ ubnt,unifiac-lr|\ ubnt,unifiac-mesh|\ diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration index 0efc2bf9d7..231afd9f57 100644 --- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration +++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration @@ -24,6 +24,14 @@ qxwlan,e558-v2-16m|\ qxwlan,e558-v2-8m) migrate_leds ":qss=:sig2" ;; +qxwlan,e600g-v2-16m|\ +qxwlan,e600g-v2-8m) + migrate_leds "blue:wan=blue:wlan" + ;; +qxwlan,e600gac-v2-16m|\ +qxwlan,e600gac-v2-8m) + migrate_leds "orange:wan=orange:wlan2g" "green:system=blue:system" + ;; qxwlan,e750a-v4-16m|\ qxwlan,e750a-v4-8m|\ qxwlan,e750g-v8-16m|\ -- cgit v1.2.3