From 4f07966696134b270e821246c8fd4624c238f1f6 Mon Sep 17 00:00:00 2001 From: Joao Henrique Albuquerque Date: Fri, 14 Aug 2020 12:04:02 -0300 Subject: ath79: add support for COMFAST CF-E375AC COMFAST CF-E375AC is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9563 + QCA9886 + QCA8337. Short specification: 2x 10/100/1000 Mbps Ethernet, with PoE support 128MB of RAM (DDR2) 16 MB of FLASH 3T3R 2.4 GHz, 802.11b/g/n 2T2R 5 GHz, 802.11ac/n/a, wave 2 built-in 5x 3 dBi antennas output power (max): 500 mW (27 dBm) 1x RGB LED, 1x button built-in watchdog chipset Flash instruction: 1) Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. 2) TFTP 2.1) Set a tftp server on your machine with a fixed IP address of 192.168.1.10. A place the sysupgrade as firmware_auto.bin. 2.2) boot the device with an ethernet connection on fixed ip route 2.3) wait a few seconds and try to login via ssh 3) TFTP trough Bootloader 3.1) open the device case and get a uart connection working 3.2) stop the autoboot process and test connection with serverip 3.3) name the sysupgrade image firmware.bin and run firmware_upg MAC addresses: Though the OEM firmware has four adresses in the usual locations, it appears that the assigned addresses are just incremented in a different way: interface address location LAN: *:DC 0x0 WAN *:DD 0x1002 WLAN 2.4g *:E6 n/a (0x0 + 10) WLAN 5g *:DE 0x6 unused *:DF 0x5006 The MAC address pointed at the label is the one assign to the LAN interface. Signed-off-by: Joao Henrique Albuquerque [add label-mac-device, remove redundant uart status, fix whitespace issues, fix commit message wrapping, remove x bit on DTS file] Signed-off-by: Adrian Schmutzler --- target/linux/ath79/generic/base-files/etc/board.d/01_leds | 4 ++++ target/linux/ath79/generic/base-files/etc/board.d/02_network | 7 +++++++ .../generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 1 + 3 files changed, 12 insertions(+) (limited to 'target/linux/ath79/generic/base-files/etc') diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 783b55ec32..827055bc1f 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -132,6 +132,10 @@ comfast,cf-e314n-v2) ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimediumhigh" "wlan0" "51" "100" ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan0" "76" "100" ;; +comfast,cf-e375ac) + ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x04" + ucidef_set_led_switch "wan" "WAN" "red:wan" "switch0" "0x02" + ;; comfast,cf-e5) ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x02" ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 52e773fea3..4133b9d7d3 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -186,6 +186,10 @@ ath79_setup_interfaces() ubnt,routerstation) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; + comfast,cf-e375ac) + ucidef_add_switch "switch0" \ + "0@eth0" "1:wan" "2:lan" + ;; comfast,cf-e560ac) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ @@ -487,6 +491,9 @@ ath79_setup_macs() lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)")) ;; + comfast,cf-e375ac) + wan_mac=$(macaddr_add $(mtd_get_mac_binary art 0x0) 1) + ;; compex,wpj344-16m|\ compex,wpj563) wan_mac=$(mtd_get_mac_binary u-boot 0x2e018) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 5a44dd94e5..9e4b4496e5 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -173,6 +173,7 @@ case "$FIRMWARE" in /lib/firmware/ath10k/QCA9888/hw2.0/board.bin rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin ;; + comfast,cf-e375ac|\ comfast,cf-e560ac|\ comfast,cf-ew72|\ comfast,cf-wr752ac-v1) -- cgit v1.2.3