From e210fe91b186ba5b229fd64d165a631810d60dac Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Thu, 12 Mar 2020 11:37:10 +0100 Subject: ath79: add support for Ubiquiti PowerBeam 5AC Gen2 The Ubiquiti PowerBeam 5AC Gen 2 (PBE-5AC-Gen2) is an outdoor 802.11ac 5 GHz bridge with a radio feed and a dish antenna. The device is hardware-compatible with the LiteBeam AC Gen2, plus the 4 extra LEDs. Specifications: - SoC: Qualcomm Atheros AR9342 rev 2 - RAM: 64 MB DDR2 - Flash: 16 MB SPI NOR (mx25l12805d) - Ethernet: 1x 10/100/1000 Mbps Atheros 8035, 24 Vdc PoE-in - WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff - WiFi 2.4 GHz: Atheros AR9340 (SoC-based) - Buttons: 1x (reset) - LEDs: 1x power, 1x Ethernet, 4x RSSI via GPIO. All blue. - UART: not tested Installation from stock airOS firmware: - Follow instructions for WA-type Ubiquiti devices on OpenWrt wiki Signed-off-by: Roger Pueyo Centelles [changed device name in commit title] Signed-off-by: Adrian Schmutzler --- .../ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ath79/generic/base-files/etc/hotplug.d/firmware') diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index dd821dd339..336b0f3c8f 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -25,6 +25,7 @@ case "$FIRMWARE" in ubnt,nanobeam-ac|\ ubnt,nanostation-ac|\ ubnt,nanostation-ac-loco|\ + ubnt,powerbeam-5ac-gen2|\ ubnt,unifiac-pro|\ yuncore,a770) caldata_extract "art" 0x5000 0x844 -- cgit v1.2.3