From e210fe91b186ba5b229fd64d165a631810d60dac Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Thu, 12 Mar 2020 11:37:10 +0100 Subject: ath79: add support for Ubiquiti PowerBeam 5AC Gen2 The Ubiquiti PowerBeam 5AC Gen 2 (PBE-5AC-Gen2) is an outdoor 802.11ac 5 GHz bridge with a radio feed and a dish antenna. The device is hardware-compatible with the LiteBeam AC Gen2, plus the 4 extra LEDs. Specifications: - SoC: Qualcomm Atheros AR9342 rev 2 - RAM: 64 MB DDR2 - Flash: 16 MB SPI NOR (mx25l12805d) - Ethernet: 1x 10/100/1000 Mbps Atheros 8035, 24 Vdc PoE-in - WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff - WiFi 2.4 GHz: Atheros AR9340 (SoC-based) - Buttons: 1x (reset) - LEDs: 1x power, 1x Ethernet, 4x RSSI via GPIO. All blue. - UART: not tested Installation from stock airOS firmware: - Follow instructions for WA-type Ubiquiti devices on OpenWrt wiki Signed-off-by: Roger Pueyo Centelles [changed device name in commit title] Signed-off-by: Adrian Schmutzler --- .../ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts | 66 ++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts (limited to 'target/linux/ath79/dts') diff --git a/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts new file mode 100644 index 0000000000..6b60ed256e --- /dev/null +++ b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "ar9342_ubnt_wa.dtsi" + +/ { + compatible = "ubnt,powerbeam-5ac-gen2", "ubnt,wa", "qca,ar9342"; + model = "Ubiquiti PowerBeam 5AC Gen2"; + + aliases { + led-boot = &led_rssi3; + led-failsafe = &led_rssi3; + led-upgrade = &led_rssi3; + }; + + leds { + compatible = "gpio-leds"; + + rssi0 { + label = "ubnt:blue:rssi0"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + rssi1 { + label = "ubnt:blue:rssi1"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + rssi2 { + label = "ubnt:blue:rssi2"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + led_rssi3: rssi3 { + label = "ubnt:blue:rssi3"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <4>; + phy4: ethernet-phy@4 { + reg = <4>; + }; +}; + +ð0 { + status = "okay"; + + /* default for ar934x, except for 1000M and 10M */ + pll-data = <0x02000000 0x00000101 0x00001313>; + + mtd-mac-address = <&art 0x0>; + + phy-mode = "rgmii-id"; + phy-handle = <&phy4>; + + gmac-config { + device = <&gmac>; + rxd-delay = <3>; + rxdv-delay = <3>; + }; +}; -- cgit v1.2.3