From acf149d531c0c263a2869abe09018e7e232a9e41 Mon Sep 17 00:00:00 2001 From: Ding Tengfei Date: Thu, 21 Mar 2019 19:50:01 +0800 Subject: ath79: add support for COMFAST CF-E5/E7 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit COMFAST CF-E5/E7 is a outdoor 4G LTE AP with PoE support, based on Qualcomm/Atheros QCA9531. Short specification: 2x 10/100 Mbps Ethernet, with 24v PoE support 64 MB of RAM (DDR2) 16 MB of FLASH (SPI) 2T2R 2.4 GHz, 802.11b/g/n built-in 1x 3 dBi antennas output power (max): 80 mW (19 dBm) Qucetel EC20 LTE MODULE(1x external detachable antenna) Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Ding Tengfei [commit subject fix] Signed-off-by: Petr Štetiar --- target/linux/ath79/dts/qca9531_comfast_cf-e5.dts | 141 +++++++++++++++++++++++ 1 file changed, 141 insertions(+) create mode 100644 target/linux/ath79/dts/qca9531_comfast_cf-e5.dts (limited to 'target/linux/ath79/dts') diff --git a/target/linux/ath79/dts/qca9531_comfast_cf-e5.dts b/target/linux/ath79/dts/qca9531_comfast_cf-e5.dts new file mode 100644 index 0000000000..c181b32aa6 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_comfast_cf-e5.dts @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca953x.dtsi" + +/ { + compatible = "comfast,cf-e5", "qca,qca9531"; + model = "COMFAST CF-E5/E7"; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + button0 { + label = "reset"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins &led_wan_pin>; + + wan { + label = "cf-e5:blue:wan"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "cf-e5:blue:lan"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "cf-e5:blue:wlan"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + rssi0 { + label = "cf-e5:blue:rssi0"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + + rssi1 { + label = "cf-e5:blue:rssi1"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + rssi2 { + label = "cf-e5:blue:rssi2"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x010000>; + read-only; + }; + + art: partition@10000 { + label = "art"; + reg = <0x010000 0x010000>; + read-only; + }; + + partition@20000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x020000 0xfd0000>; + }; + + partition@ff0000 { + label = "art-backup"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + mtd-mac-address = <&art 0x0>; + phy-handle = <&swphy4>; +}; + +ð1 { + mtd-mac-address = <&art 0x6>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; +}; + +&pinmux { + led_wan_pin: pinmux_led_wan_pin { + pinctrl-single,bits = <0x4 0x0 0xff>; + }; +}; -- cgit v1.2.3