From 9989fd5154fd8301bf363ddae0b5083220141865 Mon Sep 17 00:00:00 2001 From: Luo chongjun Date: Mon, 5 Nov 2018 10:03:05 +0800 Subject: ath79: add support for GL-iNet GL-X750 this patch adds supports for GL-X750. Specification: - SOC: QCA9531 (650MHz) - Flash: 16 MiB (W25Q128FVSG) - RAM: 128 MiB DDR2 - Ethernet: 10/100: 1xLAN + 10/100: 1xWAN - Wireless: 2.4GHz (bgn) and 5GHz (ac) - USB: 1x USB 2.0 port - Button: 1x reset button - LED: 5x LEDS (green) Flash instruction: The original firmware is openwrt, so both LuCI or sysupgrade can be used. Signed-off-by: Luo chongjun --- target/linux/ath79/dts/qca9533_glinet_x750.dts | 46 ++++++++++++ target/linux/ath79/dts/qca9533_glinet_x750.dtsi | 95 +++++++++++++++++++++++++ 2 files changed, 141 insertions(+) create mode 100644 target/linux/ath79/dts/qca9533_glinet_x750.dts create mode 100644 target/linux/ath79/dts/qca9533_glinet_x750.dtsi (limited to 'target/linux/ath79/dts') diff --git a/target/linux/ath79/dts/qca9533_glinet_x750.dts b/target/linux/ath79/dts/qca9533_glinet_x750.dts new file mode 100644 index 0000000000..7313f96d51 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_glinet_x750.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca9533_glinet_x750.dtsi" + +&spi { + status = "okay"; + num-cs = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + art: partition@50000 { + label = "art"; + reg = <0x050000 0x010000>; + }; + + partition@60000 { + label = "firmware"; + reg = <0x060000 0xfa0000>; + }; + + }; + }; +}; diff --git a/target/linux/ath79/dts/qca9533_glinet_x750.dtsi b/target/linux/ath79/dts/qca9533_glinet_x750.dtsi new file mode 100644 index 0000000000..b84c332137 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_glinet_x750.dtsi @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9533.dtsi" + +/ { + compatible = "glinet,x750", "qca,qca9533"; + model = "GL.iNet GL-X750"; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + button0 { + label = "reset"; + linux,code = ; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "gl-x750:green:power"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan2g { + label = "gl-x750:green:wlan2g"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wlan5g { + label = "gl-x750:green:wlan5g"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wan { + label = "gl-x750:green:wan"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + 4g { + label = "gl-x750:green:4g"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy { + status = "okay"; +}; + +ð0 { + status = "okay"; + mtd-mac-address = <&art 0x0>; + phy-handle = <&swphy4>; +}; + +ð1 { + mtd-mac-address = <&art 0x6>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x1002>; +}; -- cgit v1.2.3