From 633c4304ad42d18d180ba65a264ba668de445d91 Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Wed, 18 Sep 2019 15:17:56 +0200 Subject: ath79: add support for Ubiquiti NanoStation Loco M (XW) This commit adds support for the NanoStation Loco M2/M5 XW devices on the ath79 target (support was long ago available on ar71xx). Specifications: - AR9342 SoC @ 535 MHz - 64 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in - AR8032 switch - 2T2R 5 GHz radio, 22 dBm - 13 dBi built-in antenna - POWER/LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) on PCB Flashing via TFTP: - Use a pointy tool (e.g., pen cap, paper clip) and keep the reset button on the device or on the PoE supply pressed - Power on the device via PoE (keep reset button pressed) - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button - The device starts a TFTP server at 192.168.1.20 - Set a static IP on the computer (e.g., 192.168.1.21/24) - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-xw-squashfs-factory.bin Signed-off-by: Roger Pueyo Centelles --- .../dts/ar9342_ubnt_nanostation-loco-m-xw.dts | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 target/linux/ath79/dts/ar9342_ubnt_nanostation-loco-m-xw.dts (limited to 'target/linux/ath79/dts') diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanostation-loco-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_nanostation-loco-m-xw.dts new file mode 100644 index 0000000000..8fb05eda24 --- /dev/null +++ b/target/linux/ath79/dts/ar9342_ubnt_nanostation-loco-m-xw.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "ar9342_ubnt_xw.dtsi" + +/ { + compatible = "ubnt,nanostation-loco-m-xw", "ubnt,xw", "qca,ar9342"; + model = "Ubiquiti Nanostation Loco M (XW)"; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0x1>; + + phy1: ethernet-phy@1 { + reg = <1>; + phy-mode = "mii"; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&phy1>; +}; -- cgit v1.2.3