From 438605454980ee815a506a9a2a4a3532ab378922 Mon Sep 17 00:00:00 2001 From: Bart Lauret Date: Mon, 25 Feb 2019 19:27:28 +0100 Subject: ath79: add support for TP-Link Archer C5 v1 TP-Link Archer C5 v1 is a dual band router based on Qualcomm/Atheros QCA9558 + QCA9880. Specification: - 720 MHz CPU - 128 MB of RAM (Various chips) - 16 MB of FLASH (Various chips) - SoC QCA9558 integrated 3T3R 2.4 GHz Wi-Fi - minipcie slot with 3T3R 5 GHz QCA9880-BR4A - 5x 10/100/1000 Mbps Ethernet (AR8327N Switch) - 10x LEDs, 2x software buttons For further informwation on the device, visit the wiki: Signed-off-by: Bart Lauret --- .../ath79/dts/qca9558_tplink_archer-c5-v1.dts | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 target/linux/ath79/dts/qca9558_tplink_archer-c5-v1.dts (limited to 'target/linux/ath79/dts') diff --git a/target/linux/ath79/dts/qca9558_tplink_archer-c5-v1.dts b/target/linux/ath79/dts/qca9558_tplink_archer-c5-v1.dts new file mode 100644 index 0000000000..05368bd7df --- /dev/null +++ b/target/linux/ath79/dts/qca9558_tplink_archer-c5-v1.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca9558_tplink_archer-c7.dtsi" + +/ { + compatible = "tplink,archer-c5-v1", "qca,qca9558"; + model = "TP-Link Archer C5 v1"; +}; + +&gpio_keys { + rfkill { + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + debounce-interval = <60>; + }; +}; + +&gpio_leds { + wlan5g { + label = "tp-link:green:wlan5g"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; +}; + +&mtdparts { + uboot: u-boot@0 { + reg = <0x000000 0x020000>; + read-only; + }; + + firmware@20000 { + reg = <0x020000 0xfd0000>; + compatible = "tplink,firmware"; + }; + + art: art@ff0000 { + reg = <0xff0000 0x010000>; + read-only; + }; +}; -- cgit v1.2.3