From 326e488c7b02fb291e0b01970db3482284307c8d Mon Sep 17 00:00:00 2001
From: Andrey Bondar <a.bondar@8devices.com>
Date: Fri, 26 Jun 2020 11:16:00 +0300
Subject: ath79: add support for 8devices Rambutan board
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Rambutan is a Wifi module based on QCA9550/9557
http://www.8devices.com/products/rambutan

Specification:

- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of DDR2 RAM
- 128 MB of NAND Flash
- 1x 100Mbps Ethernet
- 1x 1000Mbps Ethernet (PHY on dev-kit)
- 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz
- 2x U.FL connectors on module, chip antennas on dev-kit
- 1x miniPCIe slot
- 2x USB2.0 host
- 2x UART
- SPI, I2C, GPIO

Flash instructions:

Upgrade from ar71xx target:
 sysupgrade -F /tmp/openwrt-ath79-nand-8dev_rambutan-squashfs-sysupgrade.tar
or upgrade from GUI (don't save config)

Use factory image to flash from U-Boot:
 tftpboot 80060000 openwrt-ath79-nand-8dev_rambutan-squashfs-factory.ubi
 nand erase.part ubi
 nand write 80060000 ubi ${filesize}

Signed-off-by: Petr Štetiar <ynezz@true.cz> [copy&pasted missing commit description]
Signed-off-by: Andrey Bondar <a.bondar@8devices.com>
---
 target/linux/ath79/dts/qca9557_8dev_rambutan.dts | 131 +++++++++++++++++++++++
 1 file changed, 131 insertions(+)
 create mode 100644 target/linux/ath79/dts/qca9557_8dev_rambutan.dts

(limited to 'target/linux/ath79/dts')

diff --git a/target/linux/ath79/dts/qca9557_8dev_rambutan.dts b/target/linux/ath79/dts/qca9557_8dev_rambutan.dts
new file mode 100644
index 0000000000..cf1c00c642
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_8dev_rambutan.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca955x.dtsi"
+
+/ {
+	compatible = "8dev,rambutan", "qca,qca9557";
+	model = "8devices Rambutan";
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x300000>;
+			read-only;
+		};
+
+		partition@300000 {
+			label = "u-boot-env";
+			reg = <0x300000 0x200000>;
+		};
+
+		art: partition@500000 {
+			label = "art";
+			reg = <0x500000 0x100000>;
+			read-only;
+		};
+
+		partition@600000 {
+			label = "ubi";
+			reg = <0x600000 0x7a00000>;
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		reset-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+
+	phy1: ethernet-phy@0 {
+		reg = <0>;
+		reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+		phy-mode = "sgmii";
+		at803x-override-sgmii-link-check;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	mtd-mac-address = <&art 0x0>;
+	phy-mode = "mii";
+	phy-handle = <&phy0>;
+};
+
+&eth1 {
+	status = "okay";
+
+	pll-data = <0x17000000 0x101 0x1313>;
+	phy-handle = <&phy1>;
+	phy-mode = "sgmii";
+	qca955x-sgmii-fixup;
+	mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+	status = "okay";
+
+	gpio-controller;
+	mtd-cal-data = <&art 0x1000>;
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&usb_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&uart {
+	status = "okay";
+};
-- 
cgit v1.2.3