From 0104eed1e5ca93a1c912e2d9b70e800b8d3099ad Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Sat, 20 Jul 2019 12:49:20 +0200 Subject: ath79: add support for TP-Link CPE510 v1 TP-Link CPE510-v1 is an outdoor wireless CPE for 5 GHz with two Ethernet ports based on Atheros AR9334 Specifications: - 560/450/225 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, 1x PoE-in, 1x PoE-out - 64 MB of DDR2 RAM - 8 MB of SPI-NOR Flash - 2T2R 5 GHz - 13 dBi built-in antenna - Power, LAN0, LAN1 green LEDs - 4x green RSSI LEDs Flash factory image through stock firmware WEB UI or through TFTP: To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP address:192.168.0.254 Based on the work of Paul Wassi Signed-off-by: Adrian Schmutzler --- target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts | 9 +++++++++ 1 file changed, 9 insertions(+) create mode 100644 target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts (limited to 'target/linux/ath79/dts') diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts b/target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts new file mode 100644 index 0000000000..225d16e2e7 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9344_tplink_cpexxx-v1.dtsi" + +/ { + compatible = "tplink,cpe510-v1", "qca,ar9344"; + model = "TP-Link CPE510 v1"; +}; -- cgit v1.2.3