From 56fddc2577baf194d1e9a7b37d454d12ff9fb469 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Wed, 27 Jun 2018 12:10:33 +0200 Subject: ath79: sync naming of Ubiquiti devices Use a Unifi AC Lite board-/image name consistent with other Ubiquiti devices. Signed-off-by: Adrian Schmutzler --- .../linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts | 143 +++++++++++++++++++++ 1 file changed, 143 insertions(+) create mode 100644 target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts (limited to 'target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts') diff --git a/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts b/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts new file mode 100644 index 0000000000..ff24338ca0 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dts @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca956x.dtsi" + +/ { + compatible = "ubnt,unifiac-lite", "qca,qca9563"; + model = "Ubiquiti UniFi-AC-LITE/MESH/LR"; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + wifi_ac { + label = "ubnt:white:dome"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; + + wifi_n { + label = "ubnt:blue:dome"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy1tpt"; + }; + + }; + + keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + reset { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x060000>; + read-only; + }; + + partition@60000 { + label = "u-boot-env"; + reg = <0x060000 0x010000>; + read-only; + }; + + partition@70000 { + label = "firmware"; + reg = <0x070000 0x790000>; + }; + + partition@800000 { + label = "ubnt-airos"; + reg = <0x800000 0x790000>; + read-only; + }; + + partition@f90000 { + label = "bs"; + reg = <0xf90000 0x020000>; + read-only; + }; + + partition@fb0000 { + label = "cfg"; + reg = <0xfb0000 0x040000>; + read-only; + }; + + eeprom: partition@ff0000 { + label = "EEPROM"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <4>; + phy4: ethernet-phy@4 { + phy-mode = "sgmii"; + reg = <4>; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&eeprom 0x0>; + phy-handle = <&phy4>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&eeprom 0x1000>; + mtd-mac-address = <&eeprom 0x0>; +}; -- cgit v1.2.3