From a99614a44f205f48db4278988566d2b6b2b96295 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Sat, 12 Sep 2020 20:54:04 +0200 Subject: ath79: consistently use "info" label for default-mac partition The tp-link safeloader devices typically contain a partition "default-mac" which stores the MAC addresses. It is followed by other partitions containing device info, like {"default-mac", 0x610000, 0x00020}, {"pin", 0x610100, 0x00020}, {"product-info", 0x611100, 0x01000}, In DTS, we typically assign a 0x10000 sized partition for these, which is mostly labelled "mac" or "info". In rarer cases, the partitions have been enclosed in a larger "tplink" or "config" partition. However, when comparing different devices, the implementation appears relatively arbitrary at the moment. Thus, this PR aims at harmonizing these partitions by always using the name "info" for the DTS partition containing "default-mac". "info" is preferred over "mac" as we never just have "default-mac" alone, but always some other device-info partitions as well. While at it, this also establishes a similar partitioning for the few devices where the "info" partitions are part of a bigger unspecific "config" partition or similar. Besides the harmonization itself, this also allows to merge a few cases in 11-ath10k-caldata. Signed-off-by: Adrian Schmutzler --- target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi') diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi index 2d3128e037..be691a843b 100644 --- a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi +++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi @@ -35,9 +35,9 @@ }; ð0 { - mtd-mac-address = <&mac 0x8>; + mtd-mac-address = <&info 0x8>; }; &wmac { - mtd-mac-address = <&mac 0x8>; + mtd-mac-address = <&info 0x8>; }; -- cgit v1.2.3