From caf306ce912a46e2d1204b996c3b4fede9af6dae Mon Sep 17 00:00:00 2001 From: INAGAKI Hiroshi Date: Sun, 30 Dec 2018 00:55:35 +0900 Subject: ath79: add support for ELECOM WRC-1750GHBK2-I/C MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ELECOM WRC-1750GHBK2-I/WRC-1750GHBK2-C are 2.4/5 GHz band 11ac routers, based on Qualcomm Atheros QCA9563. This commit also includes small fix; use "0x0x03000101" as pll_1000 instead of "0x03000000". Specification: - SoC: Qualcom Atheros QCA9563 - RAM: 128 MB (DDR2) - Flash: 16 MB (SPI-NOR) - WLAN: 2.4/5 GHz - 2.4 GHz: 2T2R (SoC internal) - 5 GHz: 3T3R (QCA9880) - Ethernet: 10/100/1000 Mbps - LED/key: 4x/3x (2x buttons, 1x slide-switch) - UART: through-hole on PCB - Vcc, RX, GND, TX from switch (QCA8337N) side - 115200n8 Flash instruction using factory image: 1. Boot WRC-1750GHBK2-I/C normaly 2. Access to "http://192.168.2.1/" and open firmware upgrade page ("ファームウェア更新 手動更新（アップデート）") 3. Select the OpenWrt factory image and click apply ("適用") button to perform firmware update 4. On the (initramfs) factory image, perform sysupgrade with squashfs-sysupgrade image 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi --- .../ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts | 56 ++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts (limited to 'target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts') diff --git a/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts b/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts new file mode 100644 index 0000000000..287dee6bb1 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca9563_elecom_wrc-ghbk2-i.dtsi" + +/ { + model = "ELECOM WRC-1750GHBK2-I/C"; + compatible = "elecom,wrc-1750ghbk2-i", "qca,qca9563"; +}; + +&leds { + power: power { + label = "elecom:blue:power"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + wlan2g { + label = "elecom:blue:wlan2g"; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + + wlan5g { + label = "elecom:blue:wlan5g"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; +}; + +&partitions { + partition@70000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x070000 0xf70000>; + }; + + partition@fe0000 { + label = "hwconfig"; + reg = <0xfe0000 0x010000>; + read-only; + }; + + ART: partition@ff0000 { + label = "ART"; + reg = <0xff0000 0x010000>; + read-only; + }; +}; + +&pcie { + status = "okay"; +}; -- cgit v1.2.3