From a0ef42e77c367312df7edc78dbd0d18a3faf9808 Mon Sep 17 00:00:00 2001 From: Roger Pueyo Centelles Date: Fri, 24 Apr 2020 02:22:44 +0200 Subject: ath79: add support for Ubiquiti PowerBeam 5AC 500 The Ubiquiti PowerBeam 5AC 500 (PBE-5AC-500) is an outdoor 802.11ac 5 GHz bridge with a radio feed and a dish antenna. Specifications: - SoC: Qualcomm Atheros QCA9558 - RAM: 128 MB DDR2 - Flash: 16 MB SPI NOR (mx25l12805d) - Ethernet: 1x 10/100/1000 Mbps Atheros 8031, 24 Vdc PoE-in - WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff - Buttons: 1x (reset) - LEDs: 1x power, 1x Ethernet, 4x RSSI, all blue - UART: not tested Not supported: - RSSI LEDs (probably through 74HC595 chip) Installation from stock airOS firmware: - Follow instructions for XC-type Ubiquiti devices on OpenWrt wiki at https://openwrt.org/toh/ubiquiti/common Signed-off-by: Roger Pueyo Centelles --- target/linux/ath79/dts/qca955x_ubnt_xc.dtsi | 67 +++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 target/linux/ath79/dts/qca955x_ubnt_xc.dtsi (limited to 'target/linux/ath79/dts/qca955x_ubnt_xc.dtsi') diff --git a/target/linux/ath79/dts/qca955x_ubnt_xc.dtsi b/target/linux/ath79/dts/qca955x_ubnt_xc.dtsi new file mode 100644 index 0000000000..bd8ebaf040 --- /dev/null +++ b/target/linux/ath79/dts/qca955x_ubnt_xc.dtsi @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include + +#include "qca955x.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; +}; + +&uart { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0xf60000>; + }; + + partition@fb0000 { + label = "cfg"; + reg = <0xfb0000 0x040000>; + read-only; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; -- cgit v1.2.3