From 23281ebe9634f833a35079921524454bf9d52ca1 Mon Sep 17 00:00:00 2001 From: Michael Pratt Date: Wed, 23 Dec 2020 10:31:08 -0500 Subject: ath79: Create common DTSI for EAP600 and ECB600 The boards have equivalent hardware except for LEDs and equivalent device config except for MACs also use naming convention for mtd-concat partitions to prepare for upcoming patch "treewide: use more descriptive names for concatenated partitions" Signed-off-by: Michael Pratt --- target/linux/ath79/dts/ar9344_engenius_ecb600.dts | 167 +--------------------- 1 file changed, 2 insertions(+), 165 deletions(-) (limited to 'target/linux/ath79/dts/ar9344_engenius_ecb600.dts') diff --git a/target/linux/ath79/dts/ar9344_engenius_ecb600.dts b/target/linux/ath79/dts/ar9344_engenius_ecb600.dts index 8f838607cc..13167adc4d 100644 --- a/target/linux/ath79/dts/ar9344_engenius_ecb600.dts +++ b/target/linux/ath79/dts/ar9344_engenius_ecb600.dts @@ -1,34 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "ar9344.dtsi" - -#include -#include +#include "ar9344_engenius_exx600.dtsi" / { model = "EnGenius ECB600"; compatible = "engenius,ecb600", "qca,ar9344"; - aliases { - label-mac-device = ð0; - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - serial0 = &uart; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - linux,code = ; - }; - }; - leds { compatible = "gpio-leds"; @@ -44,160 +21,20 @@ linux,default-trigger = "phy0tpt"; }; }; - - ath9k-leds { - compatible = "gpio-leds"; - - wifi2g { - label = "blue:wifi2g"; - gpios = <&ath9k 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - }; - - virtual_flash { - compatible = "mtd-concat"; - - devices = <&firmware1 &firmware2>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - compatible = "openwrt,okli"; - label = "firmware"; - reg = <0x0 0x0>; - }; - }; - }; -}; - -&ref { - clock-frequency = <40000000>; -}; - -&uart { - status = "okay"; -}; - -&spi { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@40000 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@50000 { - label = "custom"; - reg = <0x050000 0x050000>; - read-only; - }; - - partition@a0000 { - label = "loader"; - reg = <0x0a0000 0x010000>; - read-only; - }; - - firmware2: partition@b0000 { - label = "firmware2"; - reg = <0x0b0000 0x170000>; - }; - - partition@220000 { - label = "fakeroot"; - reg = <0x220000 0x010000>; - read-only; - }; - - firmware1: partition@230000 { - label = "firmware1"; - reg = <0x230000 0xbc0000>; - }; - - partition@df0000 { - label = "failsafe"; - reg = <0xdf0000 0x200000>; - read-only; - }; - - art: partition@ff0000 { - label = "art"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - eee-broken-100tx; - eee-broken-1000t; - }; }; ð0 { - status = "okay"; - mtd-mac-address = <&art 0x0>; - - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - - pll-data = <0x02000000 0x00000101 0x00001313>; - - gmac-config { - device = <&gmac>; - rgmii-gmac0 = <1>; - rxdv-delay = <3>; - rxd-delay = <3>; - }; }; &pcie { - status = "okay"; - - ath9k: wifi@0,0,0 { - compatible = "pci168c,0030"; - reg = <0x0 0 0 0 0>; - qca,no-eeprom; - qca,disable-5ghz; + wifi@0,0,0 { mtd-mac-address = <&art 0x0>; mtd-mac-address-increment = <(-2)>; - #gpio-cells = <2>; - gpio-controller; }; }; &wmac { - status = "okay"; - - qca,disable-2ghz; - - mtd-cal-data = <&art 0x1000>; mtd-mac-address = <&art 0x0>; mtd-mac-address-increment = <(-1)>; }; -- cgit v1.2.3